Structural Engineering and Mechanics

  • 제34권5호
  • /
  • Pages.611-623
  • /
  • 2010
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cable vibration control with a semiactive MR damper-numerical simulation and experimental verification

  • Wu, W.J. (Mustang Engineering, Houston) ;
  • Cai, C.S. (Department of Civil and Environmental Engineering, Louisiana State University)
  • 투고 : 2008.01.23
  • 심사 : 2009.12.01
  • 발행 : 2010.03.30
⟨ 이전 논문 다음 논문 ⟩

초록

Excessive stay cable vibrations can cause severe problems for cable-stayed bridges. In this paper a semiactive Magnetorheological (MR) damper is investigated to reduce cable vibrations. The control-oriented cable-damper model is first established; a computer simulation for the cable-damper system is carried out; and finally a MR damper is experimentally used to reduce the cable vibration in a laboratory environment using a semiactive control algorithm. Both the simulation and experimental results show that the semiactive MR damper achieves better control results than the corresponding passive damper.

키워드

참고문헌

  1. Cai, C.S., Wu, W.J. and Shi, X.M. (2006), "Cable vibration reduction with a hung-on TMD system. Part I: Theoretical study", J. Vib. Control, 12(7), 801-814. https://doi.org/10.1177/1077546306065857
  2. Chen, Z.Q., Wang, X.Y., Ko, J.M., Ni, Y.Q., Spencer, B.F. Jr. and Yang, G.Q. (2003), "MR damping system on Dongting Lake cable-stayed bridge", Proceedings of Smart Systems and Nondestructive Evaluation for Civil Infrastructures, San Diego, March.
  3. Christenson, R.E., Spencer, B.F. Jr. and Johnson, E.A. (2006), "Experimental verification of smart cable damping", J. Eng. Mech., 132(3), 268-278. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:3(268)
  4. Ciolko, A.T. and Yen, W.P. (1999), "An immediate payoff from FHWA's NDE Initiative", Public Roads, 62(6), 10-17.
  5. Johnson, E.A., Baker, G.A., Spencer, B.F. Jr. and Fujino, Y. (2007), "Semiactive damping of stay cables", J. Eng. Mech., 133(1), 1-11. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:1(1)
  6. Johnson, E.A., Christenson, R.E. and Spencer, B.F. Jr. (2003), "Semiactive damping of cables with sag", Computer-Aid. Civil Infrastr. Eng., 18(2), 132-146. https://doi.org/10.1111/1467-8667.00305
  7. Jung, H.J., Spencer, B.F. Jr., Ni, Y.Q. and Lee, I.W. (2004), "State-of-the-art of semiactive control systems using MR fluid dampers in civil engineering applications", Struct. Eng. Mech., 17(3), 493-526. https://doi.org/10.12989/sem.2004.17.3_4.493
  8. Langsoe, H.E. and Larsen, O.D. (1987), "Generating mechanisms for cable-stay oscillations at the FARO bridges", Proceeding of the International Conference on Cable-stayed Bridges, Bangkok, November.
  9. Main, J.A. and Jones, N.P. (2001), "Evaluation of viscous dampers for Stay-cable vibration mitigation", J. Bridge Eng., 6(6), 385-397. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(385)
  10. Main, J.A. and Jones, N.P. (2002), "Free vibration of taut cable with attached damper. I: Linear viscous damper", J. Eng. Mech., 128(10), 1062-1071. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1062)
  11. Pacheco, B.M., Fujino, Y. and Sulekh, A. (1993), "Estimation curve for modal damping in stay cables with viscous damper", J. Struct. Eng., 119(6), 1961-1979. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1961)
  12. Sarkar, P.P., Mehta, K.C., Zhao, Z.S. and Gardner, T. (1999), "Aerodynamic approach to control vibrations in stay-cables", Report to Texas Department of Transportation, TX.
  13. Stanway, R., Sproston, J.L. and Stevens, N.G. (1985), "Nonlinear identification of an electrorheological vibration damper", IFAC Identification and System Parameter Estimation, 195-200.
  14. Tabatabai, H., Mehrabi, A.B., Morgan, B.J. and Lotfi, H.R. (1998), "Non-destructive bridge technology: bridge stay cable condition assessment", Final report submitted to the Federal Highway Administration, Construction Technology Laboratories, Inc., Skokie, IL.
  15. Watson, S.C. and Stafford, D.G. (1988), "Cables in Trouble", Civil Eng., 58(4), 38-41.
  16. Wu, W.J. and Cai, C.S. (2006a), "Experimental study on magnetorheological dampers and application to cable vibration control", J. Vib. Control, 12(1), 67-82. https://doi.org/10.1177/1077546306061128
  17. Wu, W.J. and Cai, C.S. (2006b), "Cable vibration reduction with a hung-on TMD system, Part II: Parametric study", J. Vib. Control, 12(8), 881-899. https://doi.org/10.1177/1077546306065858
  18. Yu, Z. and Xu, Y.L. (1998), "Mitigation of three dimensional vibration of inclined sag cable using discrete oil dampers-I. formulation", J. Sound Vib., 214(4), 659-673. https://doi.org/10.1006/jsvi.1998.1609

피인용 문헌

  1. Semi-active damping with negative stiffness for multi-mode cable vibration mitigation: approximate collocated control solution vol.24, pp.11, 2015, https://doi.org/10.1088/0964-1726/24/11/115015
  2. Damping of Full-Scale Stay Cable with Viscous Damper: Experiment and Analysis vol.17, pp.2, 2014, https://doi.org/10.1260/1369-4332.17.2.265
  3. Clipped viscous damping with negative stiffness for semi-active cable damping vol.20, pp.4, 2011, https://doi.org/10.1088/0964-1726/20/4/045007
  4. Experimental calibration of forward and inverse neural networks for rotary type magnetorheological damper vol.46, pp.5, 2013, https://doi.org/10.12989/sem.2013.46.5.673
  5. Vibration Control of Buildings Using Magnetorheological Damper: A New Control Algorithm vol.2013, 2013, https://doi.org/10.1155/2013/596078
  6. Bouc–Wen model-based real-time force tracking scheme for MR dampers vol.22, pp.4, 2013, https://doi.org/10.1088/0964-1726/22/4/045012
  7. Inertial mass damper for mitigating cable vibration vol.24, pp.10, 2017, https://doi.org/10.1002/stc.1986
  8. Amplitude and frequency independent cable damping of Sutong Bridge and Russky Bridge by magnetorheological dampers vol.22, pp.2, 2015, https://doi.org/10.1002/stc.1671
  9. Extended neural network-based scheme for real-time force tracking with magnetorheological dampers vol.21, pp.2, 2014, https://doi.org/10.1002/stc.1569
  10. Damping Estimation from Free Decay Responses of Cables with MR Dampers vol.2015, 2015, https://doi.org/10.1155/2015/861954
  11. Analysis and Design of Magnetorheological Damper vol.148-149, pp.1662-8985, 2010, https://doi.org/10.4028/www.scientific.net/AMR.148-149.882
  12. Flow of the Magnetorheological Fluid in Disc-Type Clutch vol.740, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.740.709
  13. Theoretical Study on Cable’s Vibration Control by Single TMD vol.935, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.935.211
  14. Equivalent stiffness method for nonlinear analysis of stay cables vol.39, pp.5, 2010, https://doi.org/10.12989/sem.2011.39.5.661
  15. Semi-active control on long-span reticulated steel structures using MR dampers under multi-dimensional earthquake excitations vol.10, pp.6, 2010, https://doi.org/10.12989/sss.2012.10.6.557
  16. Experimental study of vibration characteristics of FRP cables based on Long-Gauge strain vol.63, pp.6, 2010, https://doi.org/10.12989/sem.2017.63.6.735
  17. A design methodology based on full dynamic model for magnetorheological energy absorber equipped with disc springs vol.28, pp.6, 2010, https://doi.org/10.1088/1361-665x/ab193e
  18. Design formulas for vibration control of taut cables using passive MR dampers vol.23, pp.6, 2010, https://doi.org/10.12989/sss.2019.23.6.521
  19. A Dynamic Model and Parameter Identification of High Viscosity Magnetorheological Fluid-Based Energy Absorber with Radial Flow Mode vol.26, pp.22, 2021, https://doi.org/10.3390/molecules26227059