References
- Alshebani, M.M. and Sinha, S.N. (2000), "Stress-strain characteristics of brick masonry under cyclic biaxial compression", J. Struct. Eng-ASCE, 126(9), 1004-1007. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1004)
- Baqi, A., Bhandari, N.M. and Trikha, D.N. (1999), "Experimental study of prestressed masonry flexural elements", J. Struct. Eng-ASCE, 125(3), 245-254. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(245)
- Dhanasekar, M., Kleeman, P.W. and Page, A.W. (1985), "Biaxial stress-strain relations for brick masonry", J. Struct. Eng-ASCE, 111(5), 1085-1100.
- Liu, L.P. (2005), Research on Biaxial Loading Experiment of Grouted Concrete Block Masonry and the Constitutive Model, PhD Thesis, Harbin Institute of Technology, Harbin, China. (in Chinese)
- Madan, A., Reinhorn, A.M., Mander, J.B. and Valles, R.E. (1997), "Modeling of masonry infill panels for structural analysis", J. Struct. Eng-ASCE, 123(10), 1295-1302. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1295)
- Priestley, M.J.N. and Elder, D.M. (1983), "Stress-strain curves for unconfined and confined concrete masonry", ACI Struct. J., 80(3), 192-201.
- Romano, F., Ganduscio, S. and Zingone, G. (1993), "Cracked nonlinear masonry stability under vertical and lateral loads", J. Struct. Eng-ASCE, 119(1), 69-87. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:1(69)
- Sargin, M. (1971), "Stress-strain relationships for concrete and the analysis of structural concrete sections", Study No. 4, Solid Mechanics Division, University of Waterloo, Waterloo Ontario, Canada.
Cited by
- Experimental and numerical investigation on in-plane behaviour of hollow concrete block masonry panels vol.10, pp.1, 2010, https://doi.org/10.12989/cac.2012.10.1.001
- Experimental research on masonry mechanics and failure under biaxial compression vol.61, pp.1, 2017, https://doi.org/10.12989/sem.2017.61.1.161