Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Thermomechanical deformation in porous generalized thermoelastic body with variable material properties

  • Received : 2008.06.19
  • Accepted : 2009.09.10
  • Published : 2010.02.20
⟨ Previous Next ⟩

Abstract

The two-dimensional deformation of a homogeneous, isotropic thermoelastic half-space with voids with variable modulus of elasticity and thermal conductivity subjected to thermomechanical boundary conditions has been investigated. The formulation is applied to the coupled theory(CT) as well as generalized theories: Lord and Shulman theory with one relaxation time(LS), Green and Lindsay theory with two relaxation times(GL) Chandrasekharaiah and Tzou theory with dual phase lag(C-T) of thermoelasticity. The Laplace and Fourier transforms techniques are used to solve the problem. As an application, concentrated/uniformly distributed mechanical or thermal sources have been considered to illustrate the utility of the approach. The integral transforms have been inverted by using a numerical inversion technique to obtain the components of displacement, stress, changes in volume fraction field and temperature distribution in the physical domain. The effect of dependence of modulus of elasticity on the components of stress, changes in volume fraction field and temperature distribution are illustrated graphically for a specific model. Different special cases are also deduced.

Keywords

References

  1. Biot, M. (1956), "Thermoelasticity and irreversible thermodynamics", J. Appl. Phys., 27, 240-253. https://doi.org/10.1063/1.1722351
  2. Chandaraskharaiah, D.S. (1998), "Hyperbolic thermoelasticity: A review of recent literature", Appl. Mech. Rev., 51, 705-729. https://doi.org/10.1115/1.3098984
  3. Cowin, S.C. (1985), "The viscoelastic behavior of linear elastic materials with voids", J. Elasticity, 15, 185-191. https://doi.org/10.1007/BF00041992
  4. Cowin, S.C. and Nunziato, J.W. (1983), "Linear elastic materials with voids", J. Elasticity, 13, 125-147. https://doi.org/10.1007/BF00041230
  5. Dhaliwal, R.S. and Singh, A. (1980), Dynamic Coupled Thermoelasticit, Hindustan Publishing Co., New Delhi, India.
  6. El-Karamany, A.S. (2004), "Boundary integral equation formulation for the generalized micro-polar thermoviscoelasticity", Int. J. Eng. Sci., 42, 157-186. https://doi.org/10.1016/S0020-7225(03)00280-5
  7. Ezzat, M.A., El-Karamany, A.S. and Samaan, A.A. (2004), "The dependence of the modulus of elasticity on reference temperature in generalized thermoelasticity with thermal relaxation", Appl. Math. Comput., 147, 169-189. https://doi.org/10.1016/S0096-3003(02)00660-4
  8. Ezzat, M.A., Othman, M.I. and El-Karamany, A.S. (2001), "The dependence of modulus of elasticity of reference temperature in generalized thermoelasticity", J. Therm. Stresses, 24, 1159-1176. https://doi.org/10.1080/014957301753251737
  9. Green, A.E. and Lindsay, K.A. (1972), "Thermoelasticity", J. Elasticity, 2, 1-7. https://doi.org/10.1007/BF00045689
  10. Iesan, D. (1986), "A theory of thermoelastic materials with voids", Acta Mech., 60, 67-89. https://doi.org/10.1007/BF01302942
  11. Kumar, R. and Ailawalia, P. (2003), "Moving load response at thermal conducting fluid and micropolar solid surface", Int. J. Appl. Mech. Eng., 8, 621-636.
  12. Kumar, R. and Ailawalia, P. (2009), "Influence of various sources in micropolar thermoelastic medium with voids", Int. J. Struct. Eng. Mech., 31(6), 715-735.
  13. Kumar, R. and Rani, L. (2005a), "Deformation due to inclined load in thermoelastic half space with voids", Arch Mech., 57, 7-24.
  14. Kumar, R. and Rani, L. (2005b), "Interaction due to Mechanical and Thermal Sources in thermoelastic halfspace with voids", J. Vib. Control, 11, 499-517. https://doi.org/10.1177/1077546305047775
  15. Kumar, R., Sharma, N. and Ram, P. (2009), "Effects of stiffness on reflection and transmission of micropolar thermoelastic waves at the interface between an elastic and microplar generalized thermoelastic solid", Int. J. Struct. Eng. Mech., 31(2), 117-135. https://doi.org/10.12989/sem.2009.31.2.117
  16. Lord, H. and Shulman, Y.A. (1967), "Generalized dynamical theory of thermoelasticity", J. Mech. Phys. Solid, 15, 299-309. https://doi.org/10.1016/0022-5096(67)90024-5
  17. Marin, M. (1997), "On the domain of influence in thermoelasticity of bodies with voids", Arch Math., 33(4), 301-308.
  18. Marin, M. (1998), "Contributions on uniqueness in thermoelastodynamics on bodies with voids", Cienc. Mat(Havana), 16(2), 101-109.
  19. Nunziato, J.W. and Cowin, S.C. (1979), "A non-linear theory of elastic materials with voids", Arch. Ration. Mech. An., 72, 175-201.
  20. Othman, I.A. (2002), "Lord-Shulman theory under the dependence of the modulus of elasticity on the reference temperature in two dimensional generalized thermoelasticity", J. Therm. Stresses, 25(11), 1027-1045. https://doi.org/10.1080/01495730290074621
  21. Othman, I.A. and Song, Y. (2008), "Reflection of magneto-thermoelastic waves with two relaxation times and temperature dependent elastic moduli", Appl. Math. Model., 32, 483-500. https://doi.org/10.1016/j.apm.2007.01.001
  22. Rusu, G. (1987), "On existence and uniqueness in thermoelasticity of materials with voids", Bull. Polish Acad. Sci. Tech. Sci., 35(7-8), 339-346.
  23. Saccomandi, G. (1992), "Some remarks about the thermoelastic theory of materials with voids", Rend. Mat. Appl., 12, 45-58.
  24. Scarpetta, E. (1995), "Well-posedness theorems for linear elastic materials with voids", Int. J. Eng. Sci., 33(2), 151-161. https://doi.org/10.1016/0020-7225(94)00060-W
  25. Sharma, J.N. and Sharma, P.K. (2001), "On the transient waves in a thermoelastic half space", Int. J. Appl. Mech. Eng., 6, 923-946.
  26. Tzou, D.Y. (1995), "A unified approach for heat conduction from macro to micro scales", J. Heat. Trans-T. ASME, 117, 8-16. https://doi.org/10.1115/1.2822329
  27. Youssef, H.M. (2005a), "Dependence of modulus of elasticity and thermal conductivity on reference temperature in generalized thermoelasticity for an infinite material with a spherical cavity", Appl. Math. Mech., 26, 470-475. https://doi.org/10.1007/BF02465386
  28. Youssef, H.M. (2005b), "Generalized thermoelasticity of an infinite body with a cylindrical cavity and variable material properties", J. Therm. Stresses, 28, 521-532. https://doi.org/10.1080/01495730590925029

Cited by

  1. A unified generalized thermoelasticity solution for the transient thermal shock problem vol.223, pp.4, 2012, https://doi.org/10.1007/s00707-011-0597-5
  2. A two-dimensional generalized thermoelastic diffusion problem for a half-space vol.52, 2015, https://doi.org/10.1016/j.euromechsol.2015.01.002
  3. A time discontinuous Galerkin finite element method for generalized thermo-elastic wave analysis, considering non-Fourier effects vol.225, pp.1, 2014, https://doi.org/10.1007/s00707-013-0961-8