참고문헌
- A. Tomlinson, J. D. Stringer, 1958, The Closing of Internal Cavities in Forgings by Upsetting, J. Iron. Steel Res. Int., March, pp. 209-217.
- R. Kopp, E. Ambaum, 1976, Analysis of Void Closure in Open-Die Forging, Int. J. Mach. Tools Manuf., Vol. 30, pp. 65-75. https://doi.org/10.1016/0890-6955(90)90042-H
- E. Erman, N. M. Medei, A. R. Roesch, D. C. Shah, 1989, Physical Modeling of Blocking Processes in Open-Die Press Forging, J. Mech. Working Technol., Vol. 19, pp. 165-194. https://doi.org/10.1016/0378-3804(89)90003-X
- E. Erman, N. M. Medei, A. R. Roesch, D. C. Shah, 1989, Physical Modeling of Upsetting Processes in Open-Die Press Forging, J. Mech. Working Technol., Vol. 19, pp. 195-210. https://doi.org/10.1016/0378-3804(89)90004-1
- M. Tanaka, S. Ono, M. Tsuneno, T. Ivadate, 1987, An Analysis of Void Crushing during Flat Die Free Forging, Adv. Technol. Plast., Vol. 11, pp. 1035-1042.
- U. Stahlberg, H. Keife, M Lundberg, A. Melander, 1980, A Study of Void Closure during Plastic Deformation, J. Mech. Working Technol., Vol. 4, pp. 51-63. https://doi.org/10.1016/0378-3804(80)90005-4
- K. N. Shah, B. V. Kiefer, J. J. Gavigan, 1986, Finite Element Simulation of Internal Void Closure in Open-Die Forging, Mater. Manuf. Processes, Vol. 1, pp. 501-516. https://doi.org/10.1080/10426918608953175
- S. P. Dudra, Y. T. Im, 1990, Investigation of Metal Flow in Open-Die Forging with Different Die and Billet Geometries, J. Mater. Process. Technol., Vol. 21, pp. 143-154. https://doi.org/10.1016/0924-0136(90)90003-D
- B. V. Kiefer, K. N. Shah, 1991, Three-Dimensional Simulation of Open-Die Press Forging, J. Eng. Mater. Technol., Vol. 112, pp. 477-485. https://doi.org/10.1115/1.2903360
- C. Y. Park, J. R. Cho, D. Y. Yang, D. J. Kim, I. S. Park, 1992, Analysis of Void Closure in the Upsetting Process of Large-Ingot, Trans. Kor. Soc. Mech. Eng., Vol. 16, No. 10, pp. 1877-1889.
- J. R. Cho, D. K. Kim, Y. D. Kim, B. Y. Lee, 1996, Study of Internal Void Closure in Slab Ingot during Hot Plate Forging, Tran. Mater. Process., Vol. 5, No. 1, pp. 18-26.
- C. Y. Park, D. Y. Yang, 1996, Large Pores in Forging a Finite Element Analysis of squeezed GLOBAL/LOCAL Scheme, Proc. Kor. Soc. Precision Eng., pp. 819-823,
- M. S. Chun, J. S. Ryu, Y. H. Moon, 2004, FEM Analysis of Void Closure Behavior during Open Die Forging of Rectangular Billets, Trans. Mater. Process., Vol. 13, No. 2, pp. 148-153. https://doi.org/10.5228/KSPP.2004.13.2.148
- Y. C. Kwon, J. H. Lee, S. W. Lee, Y. S. Jung, N. S. Kim, Y. S. Lee, 2007, A Study on Cavity Closure Behavior during Hot Open Forging Process, Trans. Mater. Process, Vol. 16, No. 4, pp. 293-298. https://doi.org/10.5228/KSPP.2007.16.4.293
- M. C. Lee, M. S. Joun, J. K. Lee, 2007, Adaptive tetrahedral element generation and refinement to improve the quality of bulk metal forming simulation, Finite Elem. Anal. Des. Vol. 43, No. 10, pp. 788-802. https://doi.org/10.1016/j.finel.2007.05.006
- http://www.afdex.com
피인용 문헌
- Study of void closure in hot radial forging process using 3D nonlinear finite element analysis vol.62, pp.9-12, 2012, https://doi.org/10.1007/s00170-011-3876-3
- A Study of Multiple Scale FEM Modeling for Prediction of Inner Void Closing Behavior in Open Die Forging Process vol.21, pp.5, 2012, https://doi.org/10.5228/KSTP.2012.21.5.319