DOI QR코드

DOI QR Code

Analysis and Design of a Soft-Switched PWM Sepic DC-DC Converter

  • Kim, In-Dong (Dept. of Electrical Eng., Pukyong National University) ;
  • Kim, Jin-Young (Dept. of Electrical Eng., Pukyong National University) ;
  • Nho, Eui-Cheol (Dept. of Electrical Eng., Pukyong National University) ;
  • Kim, Heung-Geun (Dept. of Electrical Eng., Kyungpook National University)
  • Received : 2010.05.06
  • Published : 2010.09.20

Abstract

This paper proposes a new soft-switched Sepic converter. It has low switching losses and low conduction losses due to its auxiliary communicated circuit and synchronous rectifier operation, respectively. Because of its positive and buck/boost-like DC voltage transfer function (M=D/(1-D)), the proposed converter is desirable for use in distributed power systems. The proposed converter has versions both with and without a transformer. The paper also suggests some design guidelines in terms of the power circuit and the control loop for the proposed converter.

Keywords

References

  1. F. Caricchi, F. Crescimbini, and A. Di Napoli, "20kW water-cooled prototype of a buck-boost bidirectional DC-DC converter topology for electrical vehicle motor drives," IEEE APEC Rec., pp. 887-892, 1995.
  2. J. Majo, L. Martinez, A. Poveda, L. Vicuna, F. Guinjoan, A. Sanchez, M. Valentin, and J. Marpinard, "Large-signal feedback control of a bidirectional coupled-inductor cuk converter," IEEE Trans. Industrial Electronics, Vol. 39, No. 5, pp. 429-436, Oct. 1992. https://doi.org/10.1109/41.161474
  3. G. Spiazzi and L. Rossetto, "High-quality rectifier based on coupledinductor sepic topology," IEEE PESC Rec., pp. 336-341, 1998.
  4. J. J. Jozwick and M. K. Kazimierczuk, "Dual sepic PWM switchingmode DC/DC power converter," IEEE Trans. on Industrial Electronics, Vol. 36, No. 1, pp.64-70, Feb. 1989. https://doi.org/10.1109/41.20346
  5. D. S. L. Simonetti, J. Sebastian, and J. Uceda, "The discontinuous conduction mode sepic and cuk power factor preregulators: Analysis and design," IEEE Trans. Industrial Electronics, Vol. 44, No. 5, pp. 630-637, Oct. 1997. https://doi.org/10.1109/41.633459
  6. H. S. Chung, K. K. Tse, S. Y. Hui, C.M. Mok, and M. T. Ho, "A novel maximum power point tracking technique for solar panels using a SEPIC or cuk converter," IEEE Trans. Power Electronics, Vol. 18, No. 3, pp. 717-724, May 2003. https://doi.org/10.1109/TPEL.2003.810841
  7. Maged N. F. Nashed, "Design of a digital PWM controller for a soft switching sepic converter," Journal of Power Electronics, Vol. 4, No. 3, pp. 152-160, Jul. 2004.
  8. W.-C. Lee, S.-J. Jang, S.-S. Kim, S.-W. Lee and C.-Y. Won, "A fuel cell generation system with a new active clamp sepic-flyback converter," Journal of Power Electronics, Vol. 9, No. 1, pp. 26-35, Jan. 2009.
  9. R. W. De Doncker and J. P. Lyons, "The auxiliary resonant commutated pole converter," IEEE IAS Rec., pp. 1228-1235, 1990.

Cited by

  1. Fast Transient Buck Converter Using a Hysteresis PWM Controller vol.13, pp.6, 2013, https://doi.org/10.6113/JPE.2013.13.6.991
  2. Analysis, Design and Implementation of an Interleaved DC/DC Converter with Series-Connected Transformers vol.12, pp.4, 2012, https://doi.org/10.6113/JPE.2012.12.4.643
  3. Interleaved ZVS Resonant Converter with a Parallel-Series Connection vol.12, pp.4, 2012, https://doi.org/10.6113/JPE.2012.12.4.528
  4. Investigating Buck DC-DC Converter Operation in Different Operational Modes and Obtaining the Minimum Output Voltage Ripple Considering Filter Size vol.11, pp.6, 2011, https://doi.org/10.6113/JPE.2011.11.6.793
  5. An assessment on performance of DC–DC converters for renewable energy applications vol.58, 2016, https://doi.org/10.1016/j.rser.2015.12.057
  6. Analysis of a Novel Soft Switching Bidirectional DC-DC Converter vol.12, pp.6, 2012, https://doi.org/10.6113/JPE.2012.12.6.859
  7. High Gain Soft-Switching Bidirectional DC–DC Converter for Eco-Friendly Vehicles vol.29, pp.4, 2014, https://doi.org/10.1109/TPEL.2013.2271328
  8. A Novel Hysteresis Control Strategy Based on Ampere-Second Balance of the Modulate Capacitor vol.14, pp.6, 2014, https://doi.org/10.6113/JPE.2014.14.6.1263
  9. Analysis and Implementation of a DC-DC Converter with an Active Snubber vol.11, pp.6, 2011, https://doi.org/10.6113/JPE.2011.11.6.779
  10. Analysis and Design of a New Topology of Soft-Switching Inverters vol.13, pp.1, 2013, https://doi.org/10.6113/JPE.2013.13.1.51
  11. Interleaved DC-DC Converters with Partial Ripple Current Cancellation vol.12, pp.2, 2012, https://doi.org/10.6113/JPE.2012.12.2.249
  12. Three-Level SEPIC with Improved Efficiency and Balanced Capacitor Voltages vol.16, pp.2, 2016, https://doi.org/10.6113/JPE.2016.16.2.447