비파괴검사학회지 (Journal of the Korean Society for Nondestructive Testing)

  • 제30권4호
  • /
  • Pages.345-351
  • /
  • 2010
  • /
  • 1225-7842(pISSN)
  • /
  • 2287-402X(eISSN)
한국비파괴검사학회 (The Korean Society for Nondestructive Testing)
권호 표지

SUS316L 강의 초음파 비선형 특성평가를 위한 경사입사기법

Oblique Incidence Technique for Ultrasonic Nonlinear Characterization in SUS316L Alloy

  • 투고 : 2010.05.28
  • 심사 : 2010.08.06
  • 발행 : 2010.08.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 고주기 피로를 받은 SUS316L 강에서의 초음파 비선형 특성평가를 위한 종파 경사입사기법을 연구하였다. Dog-bone형의 판상시편을 준비하여 시편 중심부에서 응력집중이 되며 각 위치마다 피로 손상이 다르도록 제작하였다. 수직투과법 외에 본 연구에서 새로이 제안한 경사입사법을 이용하여 초음파 비선형 파라미터를 측정하였다. 두 기법 모두에서 피로 손상 전보다 고주기 피로 손상 후 초음파 비선형 파라미터가 높게 나타났다. 특히, 응력 집중을 받은 시편 중심부에서 크게 증가하였다. 상대적인 초음파 비선형 파라미터는 피로 손상과 밀접한 상관성을 보였으며 결과적으로 종파를 이용한 경사입사기법은 피로 손상을 평가하는데 효과적인 기법이라 할 수 있다.

The oblique incidence technique for ultrasonic nonlinear characterization was studied in stainless steel 316L alloy subjected to high cycle fatigue. A dog-bone plate specimen was prepared to make different faitgue-driven deformation at each position where the stress concentration could occur in the middle of specimen. In addition to the normal transmission technique, the oblique incidence technique which is newly suggested in this study, was used to measure ultrasonic nonlinear parameter. The fatigued specimen shows higher ultrasonic nonlinear parameter than the virgin specimen for both techniques. Ultrasonic nonlinear parameter highly increases in the middle of test specimen where the stress concentration existes. Relative nonlinear parameter has strong correlation with fatigue damage. Consequently, the oblique incidence technique with longitudinal wave can be potential to characterize high cycle fatigue damage.

키워드

과제정보

연구 과제 주관 기관 : 한국연구재단

참고문헌

  1. K. C. Kim, H. Yamawaki, J. W. Park, H. S. Jang, H. J. Kim, W. H. Hwang and K. Y. Jhang, "Research on the nondestructive measurement of nonlinear elastic modulus by using ultrasonic wave," JSME International Journal Series A, Vol. 44, No. 3, pp. 383-389 (2001) https://doi.org/10.1299/jsmea.44.383
  2. H. Jeong, S. H. Nahm, K. Y. Jhang and Y. H. Nam, "Evaluation of fracture toughness degradation of CrMoV rotor steels based on ultrasonic nonlinearity measurements," Journal of Mechanical Science and Technology, Vol. 16, No.2, pp. 147-154 (2002)
  3. J. Y. Kim, L. J. Jacobs and J. Qu, "Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves,' Journal of the Acoustical Society of America, Vol. 120, No. 3, pp. 1266-1273 (2006) https://doi.org/10.1121/1.2221557
  4. J. Y. Kim, L. J. Jacobs, J. Qu and J. W. Littles, "Experimental characterization of fatigue damage in a nickel-base super alloy using non-linear ultrasonic waves," Journal of the Acoustical Society of America, Vol. 120, No.3, pp. 1266-1273 (2006) https://doi.org/10.1121/1.2221557
  5. K. Y. Jhang, "Applications of nonlinear ultrasonics to the NDE of material degradation," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 47, No.3, pp. 540-548 (2000) https://doi.org/10.1109/58.842040
  6. J. H. Cantrell and W. T. Yost, "Nonlinear ultrasonic characterization of fatigue microstructures," International Journal of Fatigue, Vol. 23, No.1, pp. 487-490 (2001) https://doi.org/10.1016/S0142-1123(01)00162-1
  7. J. H. Cantrell and W. T. Yost, "Acoustic harmonic generation from fatigue-induced dislocation dipoles," Philosophical Magazine A, Vol. 69, No.2, pp. 315-326 (1994) https://doi.org/10.1080/01418619408244346
  8. W. T. Yost and J. H. Cantrell, "Absolute ultrasonic displacement amplitude measurements with a submersible electrostatic acoustic transducer," Review of Scientific Instruments, Vol. 63, No.9, pp. 4182-4188 (1992) https://doi.org/10.1063/1.1143231
  9. J. H. Cantrell and K Salama, "Acoustoelastic characterization of materials," International Metals Reviews, Vol. 36, No.4, pp. 125-145 (1991) https://doi.org/10.1179/imr.1991.36.1.125
  10. 장경영，김경조, "바이스펙트럼을 이용한 혈관의 비선형 맥동 전파 특성 계측에 대한 모의실험", 의공학회지, Vol. 16, No. 4, pp. 525-531 (1995)
  11. 김경조, 장경영, "음속의 응력의존성을 이용한 재료 상태 평가에 대한 기초적 연구", 한국정밀공학회지, Vol. 13, No. 4, pp. 53-60 (1996)
  12. 김경조, 장경영, "음향비선형 파라미터 추정을 위한 바이스펙트럼 해석법의 적용", 비파괴검사학회지, Vol. 19, No. 2, pp. 85-92 (1999)
  13. 김경조, 장경영, Y. Hisashi, "초음파 비선형 전파특성을 이용한 부분 열화 재료의 평가", 비파괴검사학회지, Vol. 25, No. 2, pp. 214-219 (2001)
  14. C. S. Kim, I. K. Park, K. Y. Jhang and N. Y. Kim, "Experimental characterization of cyclic deformation in copper using ultrasonic nonlinearity," Journal of the Korean Society for Nondestructive Testing, Vol. 28, No.3, pp. 285-291 (2008)
  15. 이태훈, 장경영, "초음파의 비선형 특성을 이용한 미세균열 평가," 비파괴검사학회지, Vol. 28, No. 4, pp. 352-357 (2008)
  16. 남태형, 최성호, 장경영, 김정석, 이태훈, "협대역 레이저 여기 표면파의 음향비선형성을 이용한 Al6061 합금의 굽힘피로손상 평가," 비파괴검사학회지, Vol. 30. No. 2, pp. 139-145 (2010)
  17. J. Qu, Y. H. Berthelot and L. J. Jacobs, "Crack detection in thick annular components using ultrasonic guided waves," ImechE Journal of Mechanical Engineering Sciences, Vol. 214, No.9, pp. 1163-1171 (1999)
  18. C. Pruell, J. Y. Kim, J. Qu and L. J. Jacobs, "A nonlinear-guided wave technique for evaluating plasticity-driven material damage in a metal plate," NDT & E International, Vol. 42, No.3, pp. 199-203 (2009) https://doi.org/10.1016/j.ndteint.2008.09.009
  19. M. Deng and Junfeng Pei, "Assessment of accumulated fatigue damage in solid plates using nonlinear Lamb wave approach," Applied Physics Letters, Vol. 90, 121902 (2007) https://doi.org/10.1063/1.2714333
  20. M. Deng, P. Wang and X. Lv, "Experimental verification of cumulative growth effect of second harmonics of Lamb wave propagation in an elastic plate," Applied Physics Letters, Vol. 86, 124104 (2005) https://doi.org/10.1063/1.1891295
  21. A. N. Norris, "Symmetry conditions for third order elastic moduli and implications in nonlinear wave theory," Journal of Elasticity, Vol, 25, No. 3, pp. 247-257 (1991) https://doi.org/10.1007/BF00040928
  22. I. H Lee, D. S. Son, I. H. Lee, T. H. Lee and K. Y. Jhang, "Development of pressure control system of contact transducer for measurement of ultrasonic nonlinear parameter," Journal of the Korean Society for Nondestructive Testing, Vol. 27, No. 6, pp. 576-581 (2007)