Acknowledgement
Supported by : 한국산업기술진흥원
References
- Colbourne, J. R., "Gear Shape and Theoretical Flow Rate in Internal Gear Pumps," Transactions of the CSME, Vol. 3, No. 4, pp. 215-223, 1975.
- Saegusa, Y., Urashima, K., Sugimoto, M., Onoda, M. and Koiso, T., "Development of Oil-Pump Rotors with a Trochoidal Tooth Shape," SAE Paper No. 840454, 1984.
- Jiang, Y. and Perng, C. Y., "An Efficient 3D Transient Computational Model for Vane Oil Pump and Gerotor Oil Pump Simulations," SAE Paper No. 970841, 1997.
- Singhal, A. K., Li, H. Y., Athavale, M. M. and Jiang, Y., "Mathematical Basis and Validation of the Full Cavitation Model," Journal of Fluid Engineering, Vol. 124, No. 3, pp. 617-624, 2002. https://doi.org/10.1115/1.1486223
- Jung, S. Y., Han, S. M. and Kim, C., "Development of an Automated Design System for Oil Pumps with Ellipse Lobe Profile," Journal of the Korea Society for Precision Engineering, Vol. 26, No. 1, pp. 120-129, 2009.
- Jung, S. Y., Kim, M. S., Cho, H. Y. and Kim, C., "Development of an Automated Design System for Oil Pumps with Multiple Profiles(Circle, Ellipse and Involute)," Journal of the Korea Society for Precision Engineering, Vol. 26, No. 3, pp. 103-112, 2009.
- Colbourne, J. R., "The Geometry of Involute Gears," Springer-Verlag, pp. 24-44, 1987.
- Yang, S. Y. and Cha, S. J., "Simulation of Cavitating Flow in a Gerotor Oil Pump," KSAE Annual Conference, Vol. 1, pp. 599-604, 2005.
- Nam, K. Y., Cho, S. H. and Park, J. I., "Numerical simulation in the IC Engine Lubircation Gerotor Pump," Transactions of the KSME B, Vol. 30, No. 10, pp. 1019-1025, 2006.
- Kim, J. H. and Kim, C., "Development of an Integrated System of Automated Design of Gerotor Oil Pump," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 2, pp. 88-96, 2006.
- Kim, J. H., Kim, C. and Chang, Y. J. "Optimum Design on Lobe Shapes of Gerotor Oil Pump," J. of Mechanical Science and Technology, Vol. 20, No. 9, pp. 1390-1398, 2006. https://doi.org/10.1007/BF02915962
- Chang, Y. J., Kim, J. H., Jeon, C. H., Kim, C. and Jung, S. Y., "Development of an Integrated System for the Automated Design of a Gerotor Oil Pump," Journal of Mechanical Design, Vol. 129, No. 10, pp. 1099-1105, 2007. https://doi.org/10.1115/1.2757629