DOI QR코드

DOI QR Code

Design of Charge and Discharge Monitoring System for Secondary Batteries of Hybrid Electric Vehicle

하이브리드 전기자동차용 2차전지 충방전 모니터링 시스템 설계

  • 이준하 (상명대학교 컴퓨터시스템공학과) ;
  • 이강호 (한국재활복지대학 컴퓨터정보보안과) ;
  • 최종호 (강남대학교 전자공학과)
  • Received : 2010.08.16
  • Accepted : 2010.08.18
  • Published : 2010.08.31

Abstract

Most of air pollution in a metropolis is the result of exhaust gas emissions from automotive vehicles, and the world-wide regulation against environmental pollution is becoming more strict. Moreover the demand on development and supply of an environment-friendly automobile is increasing and the market share about that is expected to grow rapidly in this time of high oil price. The secondary batteries the most important component to store the electrical energy in hybrid electric vehicle. It needs to the higher power characteristics to emit the energy instantaneous. In this paper, we proposed the system to monitor reliably the charge and discharge states of the secondary batteries for hybrid electric vehicle. The material is about SW and HW module the software and hardware module mounted on the charge and discharge system and the monitoring system to control the charge and discharge performance effectively.

대도시 대기오염의 대부분이 자동차 배출가스에 의해서 이루어지고 있으며, 세계적으로 환경오염에 대한 규제수준이 점차 강화되고 있어 저공해의 환경 친화적인 자동차의 개발과 보급이 요구되고 있으며, 고유가 시대에서 이미 국내 외에서 개발 양산중인 하이브리드 자동차의 급속한 시장 확대가 예상된다. 하이브리드 자동차에서 전기에너지를 저장하는 배터리는 가장 중요한 구성요소 중 하나이며, 하이브리드 자동차용 배터리(전기에너지를 저장하는 2차 전지)는 순간적으로 에너지를 방출하는 특성 즉 고출력 특성이 일차적으로 요구되며, 자동차 부품으로서의 신뢰성과 내구성이 확보되어야 한다. 따라서 본 논문에서는 하이브리드 자동차에 장착되는 2차 전지의 충 방전 상태를 안정적으로 모니터링 하는 시스템과 전지의 충 방전 성능을 극대화할 수 있고 충 방전 제어가 가능한 실시간 충 방전 모니터링 시스템을 제안하였다. 논문에서 새롭게 제안한 감지부와 제어부로 구성되는 충 방전 시스템은 하드웨어 및 소프트웨어 모듈과 실시간으로 셀 배터리의 충 방전 상태를 효율적으로 제어할 수 있으며 데이터베이스와 통신모듈을 기반으로 원격제어가 가능한 시스템이다.

Keywords

References

  1. Mehrdad Ehsani, Yumin Gao, Sebastien E. Gay, Ali Emadi, "Modern Electric, Hybrid Electric, and Fuel Cell Vehicles," CRC Press, 2005.
  2. 국토해양부, 한국건설교통기술평가원, "하이브리드 자동차의 안전성 평가 기술 개발 연구 보고서," 2009년.
  3. 박진호, 이기상, "하이브리드 자동차용 리튬 이온 포리머배터리 시스템의 안전성 확보," 한국자동차공학회 오토저널, 제 31권 제 1호, 2009년.
  4. 김강출, "2W급 휴대용 초소형 파워 팩 개발," 산업기술연구회, 2008년.
  5. 선양국, "하이브리드 자동차용 아차전지 기술," 한국자동차공학회 오토저널, 제 31권 제 1호, 2009년.
  6. Jin Keun Oh, "High Energy Destiny Lithium Battery for HEV and PHEV," Proceedings of KIIS Spring Conference, 2008.
  7. Lim Keun Uk, "A Study on Intelligent Charge and Discharge Control for Secondary Battery," 2008.
  8. Yossi Drori, Carlos Martines, "The Benefits of Cell Balancing," www.xicor.com, 2005.
  9. 존 먼슨 "하이브리드/전기자동차를 위한 신뢰할 수 있는 리튬이온 배터리 모니터링 시스템," 상은미디어 자동차제조기술 통권 제 3호 2009.
  10. 정원창, 구병모, 장성주, 김상복, "배터리 수명을 고려한 원격검침 모듈 설계," 한국컴퓨터정보학회 논문지, 제13권, 제 4호, 2008년. 7월.

Cited by

  1. A Study on the Characteristics of the Indirect Air Cooling System of a Lithium-ion Battery Module for Vehicle vol.26, pp.5, 2018, https://doi.org/10.7467/KSAE.2018.26.5.663