Comparative Study on Horizontal Axis Turbine(HAT) Impeller Design

HAT 임펠러 설계 비교 연구

  • Kim, Moon-Chan (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Shin, Byung-Chul (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Lee, Ju-Hyun (Department of Naval Architecture & Ocean Engineering, Seoul National University) ;
  • Rhee, Shin-Hyung (Department of Naval Architecture & Ocean Engineering, Seoul National University) ;
  • Hyun, Beom-Soo (Division of Naval Architecture & Ocean Systems Engineering, Korea Maritime University) ;
  • Nam, Jong-Ho (Division of Naval Architecture & Ocean Systems Engineering, Korea Maritime University)
  • 김문찬 (부산대학교 조선해양공학과) ;
  • 신병철 (부산대학교 조선해양공학과) ;
  • 이주현 (서울대학교 조선해양공학부) ;
  • 이신형 (서울대학교 조선해양공학부) ;
  • 현범수 (한국해양대학교 조선해양시스템공학부) ;
  • 남종호 (한국해양대학교 조선해양시스템공학부)
  • Received : 2010.03.30
  • Accepted : 2010.05.19
  • Published : 2010.05.25

Abstract

The present study deals with the investigation about the improvement of the design of tidal stream turbine blade (HAT) in comparison with wind turbine blade because the parameters of tidal stream turbine blade has been mostly derived from wind turbines. As such, there is plenty of room for improvement of the HAT impeller blade design. Comparisons have been done between the newly designed and existing impeller computationally. Similar comparisons will also be made for the experimental results in the near future.

조류발전용 HAT 임펠러 설계에 대한 성능 비교 연구를 통하여 설계 개선방향에 대하여 고찰해 보았다. 기존의 조류발전용 임펠러는 풍력에서 사용하고 있는 설계 개념을 그대로 사용하는 경향이 있으며 밀도 차이가 크고 풍력과는 다른 조류발전의 특성을 고려하여 새로이 설계된 임펠러와 기존의 임펠러를 비교하였다. 향후 계산에 의한 비교 뿐 아니라 실험 그리고 경사류등과 같은 특수한 경우에 대한 검증을 수행할 계획이다.

Keywords

References

  1. Nicholas Stern, 2007, "The Stern Review", The Economics of Climate Change, Cambridge University Press.
  2. 김범석, 김만응, 이영호, 2008, "1 MW 풍력터빈 블레이드 형상기본설계 및 성능해석", 유체기계저널: 제11권, 제5호, pp.15-21.
  3. Weiss, J. and Smith, W., 1995, "Preconditioning Applied to Variable and Constant Density Flows", AIAA Journal, 33(11): 2050-2057. https://doi.org/10.2514/3.12946
  4. Shih, T.H., Liou, W.W., A. Shabbir, Z.G. Yang, and Zhu, J., 1995, "A new kappa-epsilon eddy viscosity model for high Reynolds-number turbulent flows", Comput. Fluids 24: 227-238. https://doi.org/10.1016/0045-7930(94)00032-T
  5. Kim, S.E. and Choudhury, D., 1995, "A Near-Wall Treatment Using Wall Functions Sensitized to Pressure Gradient", In ASME FED Vol. 217, Separated and Complex Flows. ASME.