참고문헌
- K. Tanaka, K. Minoshima, T. Oya, and K. Komai, "Influences of Stress Waveform and Wet Environment on Fatigue Fracture Behavior of Aramid Single Fiber", Comp Sci Tech, 2004, 64, 1531-1537. https://doi.org/10.1016/j.compscitech.2003.11.004
- L. Liu, Y. D. Huang, Z. Q. Zhang, Z. X. Jiang, and L. N. Wu, "Ultrasonic Treatment of Aramid Fiber Surface and Its Effect on the Interface of Aramid/Epoxy Composites", Appl Surface Sci, 2008, 254, 2594-2599. https://doi.org/10.1016/j.apsusc.2007.09.091
- J.-M. Park, D.-S. Kim, and S.-R. Kim, "Improvement of Interfacial Adhesion and Nondestructive Damage Evaluation for Plasma-Treated PBO and Kevlar Fibers/Epoxy Composites Using Micromechanical Techniques and Surface Wettability", J Colloid Interf Sci, 2003, 264, 431-445. https://doi.org/10.1016/S0021-9797(03)00419-3
- Y. Kondo, K. Miyazaki, Y. Yamaguchi, T. Sasaki, S.Irie, and K. Sakurai, "Mechanical Properties of Fiber Reinforced Styrene-Butadiene Rubbers Using Surface-modified UHMWPE Fibers under EB Irradiation", Euro Polym J, 2006, 42, 1008- 1014. https://doi.org/10.1016/j.eurpolymj.2005.11.025
- A. Saritha Chandran and Sunil K. Narayanankutty, "An Elastomeric Conducting Composite Based on Polyaniline Coated Nylon Fiber and Chloroprene Rubber", Euro Polym J, 2008, 44, 2418-2429. https://doi.org/10.1016/j.eurpolymj.2008.05.012
- P. Sae-oui, C. Sirisinha, U. Thepsuwan, and K. Hatthapanit, "Dependence of Mechanical and Aging Properties of Chloroprene Rubber on Silica and Ethylene Thiourea Loadings", Euro Polym J, 2007, 43, 185-193. https://doi.org/10.1016/j.eurpolymj.2006.10.015
- H. Ismail and H. C. Leong, "Curing Characteristics and Mechanical Properties of Natural Rubber/Chloroprene Rubber and Epoxidized Natural Rubber/Chloroprene Rubber Blends", Polymer Testing, 2001, 20, 509-516. https://doi.org/10.1016/S0142-9418(00)00067-2
- G. M. Wu, "Oxygen Plasma Treatment of High Performance Fibers for Composites", Mater Chem Phys, 2004, 85, 81-87. https://doi.org/10.1016/j.matchemphys.2003.12.004
- J.-M. Park, D.-S. Kim, and S.-R. Kim, ''Nondestructive Microfailure and Interfacial Evaluation of Plasma-Treated PBO and Kevlar Fibers/Epoxy Composites Using Micromechanical Test and Acoustic Emission", J Korean Comp Mater, 2003, 6(4), 74-79.
- L. Goglio, M. Rossetto, and E. Dragoni, "Design of Adhesive Joints Based on Peak Elastic Stresses", Inter J Adhesion & Adhesives, 2008, 28, 427-435. https://doi.org/10.1016/j.ijadhadh.2008.04.001
- H. F. Zhao, M. Chen, and Y. Jin, "Determination of Interfacial Properties between Metal Film and Ceramic Substrate with an Adhesive Layer", Materials & Design, 2009, 30, 154-159. https://doi.org/10.1016/j.matdes.2008.04.035
- D. W. Hess and D. B. Graves, "Plasma-Enhanced Etching and Deposition, Microelectronics Processing: Chemical Engineering Aspects", American Chemical Society, Washington D.C., 1989, pp.376-440.