Al-Si 합금 발포금속의 조직 및 기계적 특성에 미치는 Si함량의 영향

Effect of Si Contents on Structure and Mechanical Properties of Al-Si Alloy Metallic Foams

  • 투고 : 2009.10.27
  • 심사 : 2010.01.15
  • 발행 : 2010.02.26

초록

Metal foam is a porous or cellular structure material and representative property is a very high porosity. Foamed materials have very special properties such as sound, vibration, energy and impact absorption capacity. Especially this properties are widely used for safety demands of architecture, auto and aircraft industry. But metal foam need to increased its compression strength and hardness. This study were researched about Al-Si alloy foams with variation amount of Si contents for their fabrication and properties such as porosity, cell structure, microstructure and mechanical properties. The result are that the range of pore size is 2~4 $mm{\phi}$, the high porosity are 88%, high yield strength is 1.8MPa, the strain ratio is 60~70% and vickers hardness is 33.1~50.6.

키워드

참고문헌

  1. John Banhart, Metal foam production and stability, Advanced engineering materials, 9 (2006) 781-794
  2. Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchison JW, Wadley HNG. Metal foams: a design guide. Oxford: Butterworth Heinmann; (2000) Oxford 6-23
  3. Gibson LJ, Ashby MF, Cellular solids, 2nd ed. Cambridge University Press; (1997) 15-51
  4. Dirk Lehmhus, John Banhart, Properties of heat-treated aluminum foams; Materials science & engineering A, 349 (2003) 98-110 https://doi.org/10.1016/S0921-5093(02)00582-8
  5. Roberto Montanini, Measurement of strain rate sensitivity of aluminum foams for energy dissipation, Inter. J of Mechanical sciences, Vol. 47 (2005) 26-42. https://doi.org/10.1016/j.ijmecsci.2004.12.007
  6. Gibson LJ, Ashby MF, Cellular solids, 2nd ed. Cambridge University Press; (1997).
  7. Lehmhus D, Banhart. J. Properties of heat-treated aluminum foams. Matr SciEng A (2003) 349:98-110.
  8. Soo-Han Park, Sang-Youl Kim, Duck-Kyu Ahn, Dong-In Ha, Soon-Hyung Cho, A Study on the Viscosity and Surface Tension for Foaming Materials and the Effects of Addition Elements, Korean Journal of Materials Research, Vol.12, No.9 (2002) 729-734 https://doi.org/10.3740/MRSK.2002.12.9.729
  9. Bo-Young Hur, Soo-Han Park, Myeong-Hyeong Jang, Hyun Jun Park (A) Study on surface tension and viscosity of molten aluminum alloys. J.KASBIR, Vol3, No.2 (2003) 23-30
  10. Thaddeus B. Massalski, Binary alloy phase diagrams, American Society for Metals, (1990) Volume 1. Ac-Au to Fe-Pb
  11. Zhong Lijun, Wu Jinbo, Qin Jiting and Ning Qiu, in proceedings of the International Conference on Interface in Metal-Ceramics Composite, Anaheim, California, Feb 1990, (1989) 213.
  12. M. T. Malachevskya, and C. A. D'Ovidioa, Thermal evolution of titanium hydride optimized for aluminium foam fabrication, Scripta Materialia 12 (2009) 1-4
  13. Haizhi Ye, An Overview of the Development of Al-Si-Alloy Based Material for Engine Applications, JMEPEG (2003) 12: 288-297. https://doi.org/10.1361/105994903770343132
  14. Insu Jeon, Tadashi Asahina, The effect of structural defects on the compressive behavior of closed cell Al foam, Acta materialia, 53 (2005) 3415-3423 https://doi.org/10.1016/j.actamat.2005.04.010
  15. A. E. Markaki, T. W. Clyne, The Effect of cell micro structure in the deformation and fracture of aluminum based foam, Acta Mater., 49 (2001) 1677-1686 https://doi.org/10.1016/S1359-6454(01)00072-6
  16. R. Edwin Raj, B. S. S. Danied, Structural and Compressive Properties Correlation of Closed- cell aluminum foam. J. of Alloys and Componds, 467(2009) 553-554