펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지

생분해성 고분자와 멀칭매트의 물성

Properties of Biodegradable Polymer and Afforestation Seedling Mulching Mat

  • 김강재 (경북대학교 농업생명과학대학 임산공학과) ;
  • 김형진 (국민대학교 임산공학과) ;
  • 엄태진 (경북대학교 농업생명과학대학 임산공학과)
  • Kim, Kang-Jae (Dept. of Wood Science and Technology, College of Agriculture and Life Science, Kyungpook National University) ;
  • Kim, Hyoung-Jin (Dept. of Forest Products, Kookmin University) ;
  • Eom, Tae-Jin (Dept. of Wood Science and Technology, College of Agriculture and Life Science, Kyungpook National University)
  • 투고 : 2010.05.16
  • 심사 : 2010.06.11
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Characteristics of mixing biodegradable polymers and polymer impregnated paper for mulching mat for seedling were investigated. The mixed film of 70% PLA was most easily biodegradable. The surface of polymer films were changed to more rough due to enzymatic degradation of lipase. Tensile strength and breaking elongation of PLA mixed films were increased to the 0.04-0.31 kN/m and the 0.17-0.96%, respectively. With higher PLA contents, intensities of ester originated carboxyl group(about $1,748cm^{-1}$) were increased. Physical properties of prepared mulching mats were increased with PLA contents and stiffness of mulching mat was not so much changed.

키워드

참고문헌

  1. K.J. Kim, H.J. Kim, T.J. Eom, Properties and biodegradation of polymer for afforestation seddling mulching mat, KTAPPI, 41(4), 8-14 (2009).
  2. H.L. Lee, J.Y. Ryu, H.J. Yoon, S.B. Joo, Y. Park, Development of Multi-Functional Mulch Papers and Evaluation of Their Performance -Studies for Reducing the Basis Weight of Mulch Paper-, KTAPPI, 30(3), 38-45(1998).
  3. 김공수, 특수기능고분자, 도서출판 개신, 청주, 237-248(2001).
  4. 박정희, 홍은영, 제사속도와 열처리에 따른 polylactic acid 섬유의 물성 및 생분해성 변화, 한국의류학회지, 30, 607-614(2006).
  5. S.S. Im, Structural and morphological effects on the biodegradation of aliphatic polyesters, J. Korean Ind. Eng. Chem., 13(5), 389-402(2002).
  6. M.J. Lee, M.C. Lee, P.K. Shin, The properties and biodegradability of PCL/PLA blends, Polymer(Korea), 22(1), 93-98 (1998).
  7. 이기영, 조종수, 생분해성 고분자, 전남대학교 출판부, 광주, 20-77(1998).
  8. 정병욱, 신창호, 김영진, 장상희, 신부영, 퇴비화법에 의한 플라스틱 필름의 생분해도 연구, 공업기술연구소논문집, 27(1), 107-116(1999).