References
- Salvetat, J. P., Bonard, J. M., Thomson, N. H., Kulik, A. J., Forró, L., Benoit, W. and Zuppiroli, L., "Mechanical properties of carbon nanotubes," Applied Physics A, Vol. 69, No. 3, pp. 255-260, 1999. https://doi.org/10.1007/s003390050999
- Hongjie, D., "Carbon nanotubes: synthesis, integration, and properties," Accounts of Chemical Research, Vol. 35, No. 12, pp. 1035-1044, 2002. https://doi.org/10.1021/ar0101640
- Hong, W. K., Lee, C. O., Nepal, D., Geckeler, K. E., Shin, K. W. and Lee, T. H., "Radiation hardness of the electrical properties of carbon nanotube network field effect transistors under high-energy proton irradiation," Nanotechnology, Vol. 17, No. 22, pp. 5675-5680, 2006. https://doi.org/10.1088/0957-4484/17/22/023
- Lu, K. L., Lago, R. M., Chen, Y. K., Green, M. L. H., Harris, P. J. F. and Tsang, S. C., "Mechanical Damage of Carbon Nanotubes by Ultrasound," Carbon, Vol. 34, No. 6, pp. 814-816, 1996. https://doi.org/10.1016/0008-6223(96)89470-X
- Lee, J. H. and Rhee, K. Y., "Silane Treatment of Carbon Nanotubes and Its Effect on the Tribological Behavior of Carbon Nanotube/Epoxy Nanocomposites," Journal of Nanoscience and Nanotechnology, Vol. 9, No. 12, pp. 6948-6952, 2009.
- Zhang, D. L. and Ying, D. Y., "Formation of fcc titanium during heating high energy ball milled Al-Ti powders," Materials Letters, Vol. 52, No. 4-5, pp. 329-333, 2002. https://doi.org/10.1016/S0167-577X(01)00417-7
- Li, J. L., Wang, L. J. and Jiang, W., "Carbon microspheres produced by high energy ball milling of graphite powder," Applied Physics A, Vol. 83, No. 3, pp. 385-388, 2006. https://doi.org/10.1007/s00339-006-3485-4
- Pierard, N., Fonseca, A., Colomer, J. F., Bossuot, C., Benoit, J. M., Van Tendeloo, G., Pirard, J. P. and Nagy, J. B., "Ball milling effect on the structure of singlewall carbon nanotubes," Carbon, Vol. 42, No. 8-9, pp. 1691-1697, 2004. https://doi.org/10.1016/j.carbon.2004.02.031
- Kayrac, D., Akman, U. and Hortacu, O., "Micronization of Ibuprofen by RESS," Journal of Supercritical Fluids, Vol. 26, No. 1, pp. 17-31, 2003. https://doi.org/10.1016/S0896-8446(02)00248-6
- Rhee, K. Y., Cho, H. K. and Hong, J. S., "An investigation on the application of cryogenic ball milling to ibuprofen particle and its characteristics," Materials Science Forum, Vol. 505-507, Part 1, pp. 355-360, 2006.
- Kukovecz, A., Kanyo, T., Konya, Z. and Kiricsi, I., "Long-time low-impact ball milling of multi-wall carbon nanotubes," Carbon, Vol. 43, No. 5, pp. 994-1000, 2005. https://doi.org/10.1016/j.carbon.2004.11.030
- Zhou, F., Liao, X. Z., Zhu, Y. T., Dallek, S. and Lavernia, E. J., "Microstructural evolution during recovery and recrystallization of a nanocrystalline Al- Mg alloy prepared by cryogenic ball milling," Acta Materilia, Vol. 51, No. 10, pp. 2777-2791, 2003. https://doi.org/10.1016/S1359-6454(03)00083-1
- Lee, J. H., Jeong, T. W., Heo, J. N., Park, S. H., Lee, D. H., Park, J. B., Han, H. S., Kwon, Y. N., Kovalev, I., Yoon, S. M., Choi, J. Y., Jin, Y. W., Kim, J. M., An, K. H., Lee, Y. H. and Yu, S. G., "Short carbon nanotubes produced by cryogenic crushing," Carbon, Vol. 44, No. 14, pp. 2984-2989, 2006. https://doi.org/10.1016/j.carbon.2006.05.045
- Kathi, J. and Rhee, K. Y., "Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane," Journal of Material Science, Vol. 43, No. 1, pp. 33-37, 2008. https://doi.org/10.1007/s10853-007-2209-2
- Ma, P. C., Kim, J. K. and Tang, B. Z., "Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites," Composites Science and Technology, Vol. 67, No. 14, pp. 2965-2972, 2007. https://doi.org/10.1016/j.compscitech.2007.05.006
- Eom, J. Y., Kim, D. Y. and Kwon, H. S., "Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition," Journal of Power Source, Vol. 157, No. 1, pp. 507-514, 2006. https://doi.org/10.1016/j.jpowsour.2005.08.024
- Darsono, N., Yoon, D. H. and Kim, J. M., "Milling and dispersion of multi-walled carbon nanotubes in texanol," Applied Surface Science, Vol. 254, No. 11, pp. 3412-3419, 2008. https://doi.org/10.1016/j.apsusc.2007.11.028
- Belin, T. and Epron, F., "Characterization methods of carbon nanotubes: a review," Materials Science & Engineering B, Vol. 119, No. 2, pp. 105-118, 2005. https://doi.org/10.1016/j.mseb.2005.02.046