DOI QR코드

DOI QR Code

Mechanical Properties Observation of Ce-TZP Ceramics by Quantity Change of CeO2

CeO2의 첨가량 변화에 따른 세리아 안정화 지르코니아 세라믹스의 기계적 특성 관찰

  • 강종봉 (경남대학교 나노공학과)
  • Received : 2010.06.01
  • Accepted : 2010.07.23
  • Published : 2010.09.30

Abstract

The usual ceramic process of mixing and milling in state of oxide of $ZrO_2$ and $CeO_2$ was adopted in wet process to manufacture Ce-TZP in this study. The maximum dispersion point of every slurry manufactured with mixture of $ZrO_2$ and $CeO_2$ was neat at pH10. The stable slurry in average particle size of 90 nm can be manufactured when it is dispersed with use of ammonia water and polycarboxylic acid ammonium. The sintered Ce-TZP ceramics manufactured with addition of $CeO_2$ less than 10 mol% was progressed to the fracture of specimen due to the monoclinic phase existence more than 30% at the room temperature. More than 99% of tetragonal phase was created for the sintered body with addition of $CeO_2$ beyond 18 mol%, but the mechanical property degrade on the entire specimen was brought due to the $CeO_2$ existing above 3%. Consequently, the optimal Ce-TZP combined in oxide state was identified in 16 mol% of $CeO_2$ contents.

Keywords

References

  1. T.K. Gupta, J.H. Bechtold, R.C. Kuznickie, L.H. Cadoff, and B.R. Rossing, "Stabilization of Tetragonal Phase in Polycrystalline Zirconia," J. Mater. Sci., 12 2421-26 (1977). https://doi.org/10.1007/BF00553928
  2. R.M. Dikerson, M.V. Swain, and A.H. Heuer, "Microstructural Evolution in Ca-PSZ and the Room-Temperature Instability of Tetragonal Zirconia," J. Am. Ceram. Soc., 70[4] 214-20 (1987). https://doi.org/10.1111/j.1151-2916.1987.tb04970.x
  3. D.B. Marshall and M.V Swain, "Crack Resistance Curves in Magnesia-Partially-Stabilized Zirconia," J. Am. Ceram. Soc., 71 [6] 399-407 (1988). https://doi.org/10.1111/j.1151-2916.1988.tb05885.x
  4. F.F. Lange, "Transformation Toughening-Part 3 Experimental Observations in the $ZrO_2-Y_2O_3$ System," J. Mater. Sci., 17 240-46 (1982). https://doi.org/10.1007/BF00809059
  5. F.F. Lange, "Transformation Toughening-Part 1 Size Effects Associated with the Thermodynamics of Constrained Transformation," J. Mater. Sci., 17 225-34 (1982). https://doi.org/10.1007/BF00809057
  6. K. Tsukuma and M. Shimada, "Strength, Fracture Toughness and Vickers Hardness of $CeO_2$ Stabilized Tetragonal $ZrO_2$ Polycrystals (Ce-TZP)," J. Mater. Sci., 20 1178-84(1985). https://doi.org/10.1007/BF01026311
  7. I. Nettleship and R. Stevens, "Tetragonal Zirconia Polycrystal( TZP)-A Review," Int. J. High Technology Ceramics, 8 1-32 (1987).
  8. M. Ruehle, N. Claussen, and A.H. Heuer, "Transformation and Microcrack Toughening as Complementary Processes in $ZrO_2$ Toughened $Al_2O_3$," J. Am. Ceram. Soc., 69 [3] 195-97(1986). https://doi.org/10.1111/j.1151-2916.1986.tb07405.x
  9. E. Tani, M. Yoshimura, and S. Somiya, "Revised Phase Diagram of the System $ZrO_2$-$CeO_2$ Below 1400$^{\circ}C$," J. Am. Ceram. Soc., 66 [7] 506-10 (1983). https://doi.org/10.1111/j.1151-2916.1983.tb10591.x
  10. T.W. Coyle, W.W. Coblenz, and B.A. Bender, "Transformation Toughening in Large-Grain-Size $CeO_2$ Doped $ZrO_2$ Polycrystals," J. Am. Ceram. Soc., 71 [2] C-88-92 (1988).
  11. R.C Garvie and P.S. Nicholson, "Phase Analysis in Zirconia System," J. Am. Ceram. Soc., 67 [6] 303-05 (1972).
  12. H. Toraya, M. Yoshimura and S. Somiya, "Calibration Curve for Quantitative analysis of the Monoclinic-Tetragonal $ZrO_2$ System by X-ray Diffraction," J. Am. Ceram. Soc., 67 [6] C-119-21 (1984).
  13. H.S. Shin and S.J. Kwon, "Ritveld Analysis of Powder Xray diffraction Pattern," Sci. Technol. Ceram., 8 [2] 166 (1993).
  14. E. Dow Whitney, "Effect of Pressure on Monoclinic-Tetragonal Transition of Zirconia; Thermodynamics," J. Am. Ceram. Soc., 45 [12] 612-13 (1962). https://doi.org/10.1111/j.1151-2916.1962.tb11072.x
  15. Y.H Kim, D.Y. Heo, W.P Tai, and J. S. Lee, "Effect of High Energy Ball Milling on the Piezoelectric Properties of Leadfree $(K_{0.44}Na_{0.52})(Nb_{0.86}Ta_{0.10})-0.04LiSbO_3$ Ceramics.," J. Kor. Ceram. Soc., 45 [6] 363-67 (2008). https://doi.org/10.4191/KCERS.2008.45.6.363
  16. R.C. Garvie, "The Occurrence of Metastable Tetragonal Zirconia as a Crystalite Size Effect," J. Phy. chem., 69 [4] 1238-43 (1965). https://doi.org/10.1021/j100888a024
  17. R.C. Garvie, "Stabilization of the Tetragonal Structure in $ZrO_2$ Microcrystals," J. Hhys. Chem., 82 [2] 218-24 (1978). https://doi.org/10.1021/j100491a016
  18. F.F. Lange, "Transformation Toughening-Part 1 Size Effects Associated with the Thermodynamics of Constrained Transformation," J. Mater. Sci., 17 225-34 (1982). https://doi.org/10.1007/BF00809057