References
- Ash, R.L., 1963, The mechanics of rock breakage, pt I-IV, Pit & Quarry, 56, pp 98-100, 112, 118-123, and 126-131.
- Ash, R.L. and N.S. Smith, 1976, Changing borehole length to improve breakage – A case history, Proc. 2nd SEE Conf. Expl. & Blast. Tech., Louisville, Kentucky, 1-12.
- Bhandari, S. and V.S. Vutukuri, 1974, Rock fragmentation with longitudinal explosive charges, Proc. 3rd Cong. Int. Soc. Rock Mech., Denver, 2.B 1323-1342.
- Bhandari, S., 1997, Engineering rock blasting operations, A.A. Balkema, Rotterdam.
- Brown, T.R., 1973, Open cut drilling and blasting practice at H.I. Pty. Ltd. Paper presented at Workshop Course on Drilling and blasting, Aust. Min. Found. Inc., Adelaide, 11 p.
- Chiapetta, R.F. and C. Postupack, 1995, An update on causes and recommendations for controlling coal damage when blasting overburden, Proc. Explo-95, Brisbane, AusIMM 345-360.
- Dick, R.A., L.R. Fletcher, and D.V. D'Andrea, 1973, A study of fragmentation from bench blasting in limestone at a reduced scale., U.S.B.M. R.I. No. 7704, 24 p.
- Hagan, T.N., 1983, The influence of controllable blast parameters on fragmentation and mining costs, Proc. 1st Int. Symp. on Rock Fragmentation by Blasting, Lulea, Sweden, 31-51.
- Jhanwar, J.C., A.K. Chakraborty, H.R. Ani Reddy, and J.L. Jethwa, 1999, Application of air decks in production blasting to improve fragmentation and economies of an open pit mine, Geotech. & Geol. Engg. Jl., 417, 37-57.
- Jhanwar, J.C., J.L. Jethwa, and A.H. Reddy, 2000, Influence of air deck blasting on fragmentation in jointed rocks in an open-pit manganese mine, Engg. Geol. Jour. 57. 13-29. https://doi.org/10.1016/S0013-7952(99)00125-8
- Jimeno, C.L., E.L. Jimeno, and F.J.A. Carcedo, 1995, Drilling and blasting of rocks, A.A. Balkema, Rotterdam.
- Kanchibotla, S.S., 2001, Optimum blasting? Is it minimum cost per broken rock or maximum value per broken rock? Proc. Explo-2001, NSW, AusIMM. 35-40.
- Konya, C.J. and E.J. Walter, 1990, Surface blast design, Prentice Hall, Englewood Cliffs.
- Konya, C.J., 1996, Problems with deck loaded blast holes, Eng. & Min Jl., 73.
- Langefors, U., 1965, Fragmentation in rock blasting, Proc. 7th Symp. on Rock Mechanics, Pennsylvania State University, Pennsylvania, 1-21.
- Lindgren, G. and P. Travis, 1971, Mechanization at Reustrom, Mining Magazine, 125.3, 188-197.
- Maerz, H.N., J.A. Franklin, L. Rothenburg and D.L. Coursen, 1987, Measurement of rock fragmentation by digital photoanalysis, 5th Int. Cong. Int. Soc. Rock Mech., 687-692.
- Maerz, N.H., 1990, Photoanalysis of rock fabric, Ph.D. thesis, Dept. of Earth Sciences, Univ. of Waterloo.
- Marton, A. and R.A. Crookes, 1999, Case study in optimizing fragmentation, The AusIMM Procs, 1. 35-43.
- Oliver, P.H., 2003, Changes to drill pattern and adequate inter-row delay time improve blasting performance, Canadian Institute of Mining (CIM) Bulletin, 96. 60-65.
- Ouchterlony, F., 1995, Review of rock blasting and explosives engineering research at Sve De Fo, Proc. Explo-95, Brisbane, AusIMM, 133-146.
- Pugliese, J.M., 1972, Designing blast patterns using empirical formulas, USBM IC 8550, 33p.
- Rai, P. and H.S. Yang, 2009, Blast design vis-à-vis evaluation of fragmentation by indirect methods in a limestone quarry, Proc. Korea-Japan Joint Symp. on Rock Engineering, 299-306.
- Rai, P. 2008, Investigation of various firing patterns on different sand stone benches of a surface coal mine – a case study, Blasting & Fragmentation Jl. (formerly Fragblast Journal), ISEE Pub, 2.2, 127-145.
- Rai, P. and S.S. Baghel, 2004, Investigation of firing patterns on fragmentation in Indian opencast limestone mine, Quarry Management, 21-30.
- Rai, P., 2002, Evaluation of effect of some blast design parameters on fragmentation in opencast mine, Ph.D. thesis, Banaras Hindu University, Varanasi.
- Rai, P. and F.L. Imperial, 2005, Mesh area vis-à-vis blast performance in a limestone quarry - a case study, Fragblast, The Int. Jl. for Blasting and Fragmentation, 9.4, 219-232.
- Scott, A., G. Chitombo and T. Kleine, 1996, The challenge of the prediction and control of fragmentation in mining, Proc. 4th Int. Symp. on Rock Fragmentation by Blasting (Fragblast-4), Vienna, Austria, 507-518.
- Singh, S.P. and T. Yalcin, 2002, Effect of muck size distribution on scooping operations, J. Int. Soc. Expl. Engrs., 1. 315-325.
- Smith, N.S., 1976, Burden rock stiffness and its effects on fragmentation in bench blasting, Ph.D. thesis, Univ. of Missouri, USA.
- Tansey, D.O., 1980, A delay sequencing blasting system, Proc. 6th SEE Conf. Expl. & Blasting Tech., Florida, 345-374.
- Wang, W., F. Bergholm and O. Stephansson, 1996, Image analysis of fragment size and shape, Proc. Fragblast-5, Montreal, 233-243.
- Williamson, S., C. McKenzie and H. O'Loughlin, 1983, Electric shovel performance as a measure of blasting efficiency, Proc. 1st Int. Symp. on Rock Fragmentation by Blasting, 1983, Lulea, Sweden, 625-635.