Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

The Effects of Ultrasonic Vibration on Surface Finish in Nano-second Laser Machining

나노초 레이저 가공에서 초음파 진동이 가공표면에 미치는 영향

  • Received : 2010.03.25
  • Accepted : 2010.06.01
  • Published : 2010.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

Conventionally, the machined surface roughness in nano-second(ns) laser machining is damaged and rough due to thermal effects. To obtain the improved surface finish, the ultrasonic vibration is applied to ns-laser machining. The ultrasonic vibration jig is developed to apply the ultrasonic high precision motion to workpieces. And then the ns-laser machining is conducted to compare the effects of the ultrasonic vibration. The results show that the surface roughness with ultrasonic vibration is smoother than that without the vibration. The phenomenon could be explained as enhancement of heat transfer by ultrasonic vibration.

Keywords

References

  1. Ahn, D. G., Jung, K. W., Yoo, Y. T., and Shin, H. J., 2007, "Preliminary Study on Micro-Drilling of Al 1050 Using the Pulsed Nd:YAG Laser," Proceedings of Korean Society of Mach. Tool. Eng. Spring Conference 2007, Vol. 10, No. 1, pp. 339-345.
  2. Azarhoushang,, B. and Akbari, J., 2008, "Ultrasonic-Assisted Drilling of Inconel 738-LC," Int. J. Mach. Tools & Manuf., Vol. 47, pp. 1027-1033.
  3. Neugebauer, R. and Stoll, A., 2004, "Ultrasonic Application in Drilling," J. Mater. Process. Tech., Vol. 192-193, pp. 306-311.
  4. Zhang, D., Feng, X., Wang, L., and D. Chen, 1994, "Study on the Drill Skidding Motioning Ultrasonic Vibration Microdrilling," Int. J. Mach. Tool. Manuf., Vol. 34, No. 6, pp. 847-857. https://doi.org/10.1016/0890-6955(94)90064-7
  5. Suzuki, H. and Yagishita, H., 2005, "Burrless Drilling by Vibration Cutting Applying Ultrasonic Torsional Mode Vibration," Proceedings of the 33rd North American Manuf. Research Conference, New York.
  6. Guo, Z. N., Lee, T. C., Yue, T. M., and Lee, W. S., 2003, "A Study of Ultrasonic-Added Wire Electrical Discharge Machining," J. Mater. Process. Tech., Vol. 139, pp. 226-228. https://doi.org/10.1016/S0924-0136(03)00224-3
  7. Kuo, K. L., 2007, "Experimental Investigation of Ultrasonic Vibration-Assisted Tapping," J. Mater. Process. Tech., Vol. 192-193, pp. 306-311. https://doi.org/10.1016/j.jmatprotec.2007.04.033
  8. Jackson, M. J., 2007, Micro and Nanomanufacturing, Springer, New York.
  9. Kim, H. J. and Jeong, J. H., 2006, "Numerical Analysis of Experimental Observations for Heat Transfer Augmentation by Ultrasonic Vibration," Heat Transfer Eng., Vol. 27, No. 2, pp. 14-22. https://doi.org/10.1080/01457630500397161