참고문헌
- S. S. Han, K. C. Park, 2008, Effect of Surface Roughness on Frictional Behavior of Sheet Steel for Automotive, Transactions of Materials Processing, Vol.17, No.5, pp. 401-406. https://doi.org/10.5228/KSPP.2008.17.6.401
- B. H. Lee, Y. T. Keum, 2002, Friction model for sheet metal forming analysis (Part1:Experiment), Transactions of Materials Processing, Vol.11, No.4, pp. 349-354. https://doi.org/10.5228/KSPP.2002.11.4.349
- W. T. Kim, D. H. Lee, M. S. Suh, Y. H. Moon, 2005, Analysis on parameters affecting the friction coefficient in drawbead forming of sheet metal, Transactions of materials processing, Vol.14, No.8, pp.668-674. https://doi.org/10.5228/KSPP.2005.14.8.668
- P. Skarpelos, J. W. Morris, Jr., 1997, The effect of surface morphology on friction during forming of electrogalvanized sheet steel, WEAR, Vol. 212, pp. 165-172. https://doi.org/10.1016/S0043-1648(97)00174-9
- E. Doege, C. kaminsky, A. Bagaviev, 1999, A New Concept for the Description of Surface Friction Phenomena, JMPT, Vol.94, pp. 189-192. https://doi.org/10.1016/S0924-0136(99)00102-8
- B. Ma, A. K. Tieu, C. Lu, Z. Jiang, 2002, A Finiteelement Simulation of Asperity Flattening in Metal Forming, JMPT, Vol.130-131, pp. 450-455. https://doi.org/10.1016/S0924-0136(02)00752-5
- M. Jonasson, A. Wihlborg, L. Gunnarsson, 1998, Analysis of Surface Topography Changes in Steel Sheet Strips during Bending under Tension Friction Test, Int. J. Mach. Tools. Manufact. Vol.38, No.5-6, pp. 459-467. https://doi.org/10.1016/S0890-6955(97)00090-4
- A. Azushima, M. Sakuramoto, 2006, Effects of Plastic Strain on Surface Roughness and Coefficient of Friction in Tension-bending Test, Annals of the CIRP, Vol. 55.
- T. C. Hsu, T. S. Yang, 2001, The Computer Simulation of Tribological Influence on Strain Path and Forming Limit in Punch Stretching of Sheet Metal, Advanced Manufacturing Technology, Vol. 17, pp. 393-399. https://doi.org/10.1007/s001700170157
- H. W. Lee, 2009, Research on Friction Behavior of Steel Sheets under Lubrication Conditions, Asia Steel 2009, p. 184.