DOI QR코드

DOI QR Code

Cathodic Recirculation System Using a Dual-ejector to Improve Oxygen Utilization of a Submarine Fuel Cell

  • Kim, Min-Jin (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Sohn, Young-Jun (Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lee, Won-Yong (Fuel Cell Research Center, Korea Institute of Energy Research)
  • Received : 2010.07.16
  • Accepted : 2010.07.29
  • Published : 2010.08.28

Abstract

In terms of the system efficiency, it is very useful to apply the ejector into the fuel recirculation system of a fuel cell system since the ejector needs no parasitic power to operate. Since the conventional automotive fuel cell use hydrogen and air as their fuel, the only hydrogen is needed to be recirculated for the better fuel efficiency. On the other hand, the submarine fuel cell needs both hydrogen and oxygen recirculation systems because the submarine drives under the sea. In particular, the cathodic recirculation has to meet the tougher target since the oxygen based pressurized stack generally used in the submarine applications generates the significant amount of the water in the stack during the operation. Namely, the oxygen utilization has designed less than 50% in the whole operating range for the better exhausting of the generated waters. And thereby in terms of the oxygen utilization, the entrainment ratio of the ejector should be more than 1 within the whole operating range. However, the conventional ejector using a constant nozzle can not afford to satisfy the mentioned critical requirement. To overcome the problem, the dual-ejector and its control strategy are designed. The performance of the proposed dual-ejector is verified by the experiments based on the real operating conditions of the target submarine system. Furthermore, the proposed design method can be used for the other fuel recirculation system of a large-scale fuel cell system with the critical requirement of the fuel utilization.

Keywords

References

  1. E. D. Rogdakis and G. K. Alexis, ‘Investigation of ejector design at optimum operating conditioin’ Energy Convers. Manage., 41, 3 (2000). https://doi.org/10.1016/S0196-8904(00)00030-3
  2. S. K. Chou, P. R. Yang, and C. Yap, ‘Maximum mass flow ration due to secondary flow choking in an ejector refrigeration system’ Int. J. Refrig., 24, 486 (2001). https://doi.org/10.1016/S0140-7007(00)00074-8
  3. A. Levy, M. Jelinek, and I. Bored, ‘Numerical study on the design parameters of a jet ejector for absorption systems’ Appl. Energy, 72, 467 (2002). https://doi.org/10.1016/S0306-2619(02)00023-5
  4. R.Yapici and H. K. Ersoy, ‘Performance characteristics of the ejector refrigeration system based on the constant area ejector flow model’ Energy Convers. Manage., 46, 3117 (2005). https://doi.org/10.1016/j.enconman.2005.01.010
  5. P. Rodatz, A. Tsukada, M. Mladek, and L. Guzzella, ‘Efficiency improvements by pulsed hydrogen supply in PEM fuel cell systems’ Proceedings of the 15the IFAC Triennial World Congress, IFAC, (2002).
  6. F. Marsano, L. Magistri, and A. F. Massardo, ‘Ejector performance influence on a solid oxide fuel cell anodic recirculation system’ J. Power Source, 129, 216 (2004). https://doi.org/10.1016/j.jpowsour.2003.11.034
  7. M. L. Ferrari, A. Traverso, L. Magistri, and A. F. Massardo, ‘Influence of the anodic recirculation transient behavior on the SOFC hybrid system performance’ J. Power Source, 149, 22 (2005). https://doi.org/10.1016/j.jpowsour.2005.01.059
  8. A. Y. Karnik, ‘Modeling and control of an ejector based anode recirculation system for fuel cells’ Proceedings of FUELCELL2005, Ypsilanti, Michigan, (2005).
  9. B. J. Huang, J. M. Chang, C. P. Wang, and V. A. Petrenko, ‘A 1-D analysis of ejector performance’ Int. J. Refrigeration, 22, 354 (1999). https://doi.org/10.1016/S0140-7007(99)00004-3
  10. M. Kim, Y. -J. Sohn, C. -W. Cho, W. -Y. Lee, and C. -S. Kim, ‘Customized design for the ejector to recirculation a humidified hydrogen fuel in a submarine PEMFC’ J. Power Source, 176, 529 (2008). https://doi.org/10.1016/j.jpowsour.2007.08.069
  11. R. O’hayre, J.-W. Cha, W. Colella, and F. B. Prinz, “Fuel Cell Fundamentals”, 182, John Wiley & Sons, New York (2009).