KURT 주변지역의 수리지질특성 연구

Hydrogeological properties around the KURT

  • 투고 : 2010.01.27
  • 심사 : 2010.06.14
  • 발행 : 2010.06.30

초록

현재 방사성폐기물 처분기술 개발을 위해 운영되고 있는 시설인 KURT는 부지특성조사의 일환으로 안정성 평가차원에서 확대하여 이뤄지고 있다. 본 연구는 KURT 주변지역의 구성된 지질모델을 기초로 하여 부지규모의 수리지질학적 유동특성에 대한 연구를 하였다. 연구지역에 분포된 시추공을 이용하여 스테레오 넷으로 도시한 결과 NS, NW, EW, 저경사 단열대군으로 구분할 수 있었으며 지질 모델의 구성요소로는 상부 토양층 및 풍화대, 저경사 단열대, 단열대로 구분되었다. 구분된 단 열대에 수리시험을 통하여 지하수가 대수층을 통해 이동할 수 있는 유동력을 제공하는 수리전도도 및 수리경사에 영향을 미치는 단열의 크기 와 방향성에 대한 정규분포 통계 분석을 수행함으로 연구지역 내 NS 방향의 단열이 우세함을 확인하였다. 또한, 저경사 단열대의 수리전도도의 값은 3.61E-07 m/s로 주요 단열대보다 큰 값을 가지며, 기반암이나 기반암에 존재하는 단열대와 수리학적 특성이 상이하다.

Current technology for radioactive waste disposal facility is operated as part of KURT site characterization in terms of reliability assessment is conducted to expand. In this study, a geological model of KURT surrounding area on the basis of flow characteristics of the site-scale hydrogeological study was about. Distributed in the study area into four boreholes were plotted using the stereo net NS, NW, EW, Low-angle fracture group was able to identify the components of geological models and include top soil layer, belt of weathering, Low-angle fracture zone, fracture zone was divided into. Separated by fracture of the hydraulic test of through the groundwater aquifer that provides the flow hydraulic conductivity and insulation hydraulic affecting the slope of the normal distribution for the size and direction by performing statistical analysis of fracture in the direction of local ns The advantage was confirmed. In addition, Low-angle fracture hydraulic conductivity of the value of 3.61e-07 m/s has a value greater than the major fracture, the fracture zones exist in the base rock and base rock and the hydraulic characteristics of the different methods applied and had to have a different interpretation judged by was.

키워드

참고문헌

  1. 김경수, 김천수, 배대석, 2002, 등연속체매질로서의 화강암지역의 유효수리전도도 산출, 지질공학회지, 12(3), 319-332.
  2. 박경우, 고용권, 김경수, 최종원, 2009, 지표조사를 이용한 KURT 주변 지역의 지질모델구축, 방사성폐기물학회지, 7(4), 191-205.
  3. Cooper, h.h., Bredhoeft, Jr.J. D. and Papadopulous, I.S., 1967, Response of a Finire-Diameter Well to an Instantaneous Charge of Water, Water Resources Research, 3(1), 263-269. https://doi.org/10.1029/WR003i001p00263
  4. Doe, T. W and J. E. Geier, 1990. Interpretation of fracture system geometry wusing well test data, Stripa Project 91-03, SKB, Stockholm. 222p.