대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제47권4호
  • /
  • Pages.508-516
  • /
  • 2010
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

챔퍼가 3차원 사각 탱크 내부의 액체 슬로싱에 미치는 영향

Effect of Chamfering Top Corners on Liquid Sloshing in the Three-dimensional Rectangular Tank

  • 정재환 (부산대학교 조선해양공학과) ;
  • 이창열 (부산대학교 조선해양공학과) ;
  • 윤현식 (부산대학교 첨단조선공학연구센터)
  • Jung, Jae-Hwan (Department of Naval Architecture and, Ocean Engineering, Pusan National University) ;
  • Lee, Chang-Yeol (Department of Naval Architecture and, Ocean Engineering, Pusan National University) ;
  • Yoon, Hyun-Sik (Advanced Ship Engineering Research Center, Pusan National University)
  • 투고 : 2010.01.04
  • 심사 : 2010.06.25
  • 발행 : 2010.08.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims at investigating the effect of the chamfer on the liquid sloshing in the three-dimensional (3D) rectangular tank. In order to simulate the 3D incompressible viscous two-phase flow in the 3D tank with partially filled liquid, the present study has adopted the volume of fluid (VOF) method based on the finitevolume method which has been well verified by comparing with the results of the relevant previous researches. The effects of the chamfering top corners of the tank on the liquid sloshing characteristics have been investigated. The angle of the chamfering top corners (${\theta}$) has been changed in the range of $0^{\circ}{\leq}{\theta}{\leq}60^{\circ}$(${\Delta}{\theta}=15^{\circ}$) to observe the free surface behavior, and the effect on wall impact load. Generally, as the angle of the chamfering top corners increases, the impact pressure on the upper knuckle point decreases. However it seemed that a critical angle of the chamfering top corners exists to reveal the lowest impact pressure on the wall.

키워드

참고문헌

  1. Arai, M, Cheng, L.Y. and Inoue, Y., 1994, “ 3D numerical simulation of impact load due to liquid cargo sloshing,” J. of the Society of Naval Architecture of Japan. 171, pp. 177–184.
  2. Bae, S. Y., “ A study on vibration characteristics with sloshing mode effect in water tank structure,” Journal of the Society of Naval Architects of Korea Vol. 40, No. 6, pp. 88-95. https://doi.org/10.3744/SNAK.2003.40.6.088
  3. Chen, Y.G., Djidjeli. K. and Price W.G., 2009, “ Numerical simulation of liquid sloshing phenomena in partially filled containers,” Computers & Fluids, Vol. 38, pp. 830-842. https://doi.org/10.1016/j.compfluid.2008.09.003
  4. Hwang, Y.S., Jung, J.H., Kim, D.W. and Ryu M.C., 2008, “ An experimental study on sloshing impact pressures with two identically shaped rectangular 2-dimensional model tanks with different sizes,” Special issue of the society of naval architects of Korea. pp. 16-28.
  5. Kang, D.H. and Lee, Y.B., 2005, “ Summary Report of Sloshing Model Test for Rectangular Model,” Daewoo Shipbuilding & Marine Engineering Co.,Ltd. South Korea , No. 001.
  6. Lamb, S.M., 1932, Hydrodynamics, Dover Publications, Inc., New York.
  7. Lee, D. Y. and Choi, H.S., 1998, “ A study on the sloshing of cargo tanks including hydroelastic effects,” Journal of the Society of Naval Architects of Korea Vol. 35, No. 4, pp. 27-37.
  8. Noh, B. J., 2005, “ Sloshing load analysis in spherical tank of LNG carrier,” Special issue of the Society of Naval Architects of Korea. pp. 22-30.
  9. Park, J.J., Kim, M.S., Kim, Y.B. and Ha, M.K., 2005, “ Numerical sloshing analysis of LNG carriers in irregular waves,” Special Issue of the Society of Naval Architects of Korea. pp. 38-43.
  10. Rhee, S.Y., 2005, “ Unstructured grid based reynolds-averaged navier-stokes method for liquid tank sloshing,” ASME, Vol. 127, pp. 572-582. https://doi.org/10.1115/1.1897409
  11. Kim, Y.H., Shin, Y.S. and Lee, K.H., 2004, “ Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks,” Applied Ocean Research No. 26 pp. 213-226.
  12. Yoon, H.S, Lee, J.M., Chun, H.H. and Lee, H.G., 2008, “ A numerical study on the sloshing characteristics in a twodimensional rectangular tank using the level set method,” Journal of the Society of Naval Architects of Korea. Vol. 45, No. 2, pp. 132-143. https://doi.org/10.3744/SNAK.2008.45.2.132
  13. Abramson, R.L., Bass. R.L., Faltinsen O.M., and Olsen, H.A.,1974, “ Liquid sloshing in LNG carriers,” Proceedings of the 10th symposium of naval hydrodynamics, pp. 371– 88.
  14. Fluent Inc., 2006, Fluent 6.3.26 User Guide Manual , Fluent Inc., Levanon.