Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

On-Machine Measurement System Development of Hole Accuracy using Machine Vision

머신비젼을 이용한 구멍 정밀도의 기상측정시스템 개발

  • Kim, Min-Ho (Division of Mechanical System Engineering, Chonbuk Univ.) ;
  • Kim, Tae-Yeong (Division of Mechanical System Engineering, Chonbuk Univ.)
  • 김민호 (전북대학교 기계시스템공학부) ;
  • 김태영 (전북대학교 기계시스템공학부)
  • Received : 2009.11.10
  • Accepted : 2010.03.02
  • Published : 2010.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The integrity and accuracy of the drilling hole are decided by positional error, diameter error, the roundness, the straightness, the cylindericity, size of the burr, the surface roundness and others. Among these parameters, positional error and diameter error have the most important parameters. The diameter error has been widely studied, but there has been little research done about the positional error due to the difficulty of measuring it. The measurement of hole location and diameter would be performed by CMM(Coordinate Measurement Machine). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, we have developed a hole location and diameter error measuring device using machine vision. The developed measurement device attached to a CNC machine can determine hole quality quickly and easily.

Keywords

References

  1. Kim, S. H. and Kim, D. H., "On-the-Machine Measurement System," J. of the KSPE, Vol. 18, No. 16, pp. 9-18, 2001.
  2. Choi, J. P., Min, B. K. and Lee, S. J., "Machining Accuracy Improvement by On Machine Part Measurement and Error Compensation," J. of the KSPE, Vol. 20, No. 12, pp. 34-41, 2003.
  3. Kahng, C. H. and Ham, I., "A Study on Sequential Quality Improvment in Hole-Making Process," Annals of the CIRP, Vol. 24, No. 1, pp. 27-32, 1975.
  4. Ei-Tammimi, A. and Darwish, S. M., "Geometric accuracies of NC and conventionally drilled holes," Journal of Materials Processing Technology, Vol. 75, No. 1, pp. 111-116, 1998. https://doi.org/10.1016/S0924-0136(97)00299-9
  5. Kaminski, J. and Crafoord, R., "Position Accuracy of Drilled Holes," Annals of the CIRP, Vol. 40, No. 1, pp. 503-506, 1991. https://doi.org/10.1016/S0007-8506(07)62040-X
  6. Lehtihet, E. A., Gunasena, U. N. and Weill, R., "Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole," Annals of the CIRP, Vol. 39, No. 1, pp. 569-572, 1990. https://doi.org/10.1016/S0007-8506(07)61121-4
  7. Wang, K., "Drilling Process Evaluation by Predicitng Drilled Hole Quality and Drill Bit Wear With On-Line Acoustic Emission Signals," Oregon State University, 1997
  8. Kim, M.-H., "A Study on Vision Measurement System and Dynamic Signal Analysis for Improving Hole Accuracy in Drilling," Ph.D. Thesis, Department of Precision Mechanical Engineering, Chonbuk National University, 2009.