Effects of Polyacrylic Acid Doping on Microstructure and Critical Current Density of $MgB_2$ Bulk

$MgB_2$ bulk의 미세구조와 임계전류밀도에 미치는 polyacrylic acid doping 효과

  • Lee, S.M. (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Hwang, S.M. (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Lee, C.M. (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Joo, J. (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Kim, C.J. (Neutron Science Division, Korea Atomic Energy Research Institute)
  • Received : 2010.03.05
  • Accepted : 2010.04.16
  • Published : 2010.04.30

Abstract

We fabricated the polyacrylic acid (PAA)-doped $MgB_2$ bulks and characterized their lattice parameters, actual C substitutions, microstructures, and critical properties. The boron (B) powder was mixed with PAA using N,N-dimethylformamide as solvent and then the solution was dried out at $200^{\circ}C$ and crushed. The C treated B powder and magnesium powder were mixed and compacted by uniaxial pressing at 500 MPa, followed by sintering at $900^{\circ}C$ for 1 h in high purity Ar atmosphere. We observed that the PAA doping increased the MgO amount but decreased the grain size, a-axis lattice constant, and critical temperature ($T_c$), which is indicative of the C substitution for B sites in $MgB_2$. In addition, the critical current density ($J_c$) at high magnetic field was significantly improved with increasing PAA addition: at 5 K and 6.6 T, the $J_c$ of 7 wt% PAA-doped sample was $6.39\;{\times}\;10^3\;A/cm^2$ which was approximately 6-fold higher than that of the pure sample ($1.04\;{\times}\;10^3\;A/cm^2$). This improvement was probably due to the C substitution and the refinement of grain size by PAA doping, suggesting that PAA is an effective dopant in improving $J_c$(B) performance of $MgB_2$.

Keywords

References

  1. J. Nagamatsu, N. Nakagawa, T. Muranaka, Y. Zenitani, J. Akimitsu, "Superconductivity at 39 K in magnesium diboride", Nature, 410, 63-64 (2001). https://doi.org/10.1038/35065039
  2. C. Buzea and T. Yamashita, "Review of the superconducting properties of $MgB_2$", Supercond. Sci. Technol., 14, 115-146 (2001). https://doi.org/10.1088/0953-2048/14/11/201
  3. P. Kovac et al., "Transport current improvements of in situ MgB2 tapes by the addition of carbon nanotubes, silicon carbide or graphite", Supercond. Sci. Technol., 20, 105-111 (2007). https://doi.org/10.1088/0953-2048/20/1/019
  4. H. Fujii, K. Togano, K. Ozawa, "Grain coupling and critical current density in Fe-sheathed carbon-substituted $MgB_2$ tapes fabricated through an ex situ process using chemically reacted powder", Supercond. Sci. Technol., 21, 095018 (2008). https://doi.org/10.1088/0953-2048/21/9/095018
  5. M. Herrmann et al., "The effect of reactive nanostructured carbon on the superconducting properties of mechanically alloyed $MgB_2$", Supercond. Sci. Technol., 20, 1108-1114 (2007). https://doi.org/10.1088/0953-2048/20/12/004
  6. M. Maeda et al.," Fabrication of highly dense $MgB_2$ bulk at ambient pressure," Supercond. Sci. Technol., 21, 032004 (2008). https://doi.org/10.1088/0953-2048/21/3/032004
  7. V. Braccini et al.," Improvement of Magnetic Field Behavior of Ex-Situ Processed Magnesium Diboride Tapes," IEEE Trans. Appl. Supercond., 17, 2766-2769 (2007). https://doi.org/10.1109/TASC.2007.899491
  8. A. V. Pogrebnyakov, J. M. Redwing, J. E. Giencke," Carbon-doped MgB2 thin films grown by hybrid physical-chemical vapor deposition," IEEE Trans, Appl, Supercond., 15, 3321-3324, (2005). https://doi.org/10.1109/TASC.2005.848871
  9. J. H. Kim, S. Zhou, M. S. A. Hossain, A. V. Pan, S. X. Dou, "Carbohydrate doping to enhance electromagnetic properties of $MgB_2$ superconducting bulk material", IEEE Trans, Appl, Supercond., 15, 3204-3206, (2005). https://doi.org/10.1109/TASC.2005.848792
  10. Z. Gao, Y. Ma, X. Zhang, D. Wang, Z. Yu, H. Yang, H. Wen, E. Mossang, "Enhancement of the critical current density and the irreversibility field in maleic anhydride doped $MgB_2$ based tapes", J. Appl. Phys, 102, 013914, (2007). https://doi.org/10.1063/1.2748711
  11. R. Zeng, L. Lu, S. X. Dou, "Significant enhancement of the superconducting properties of $MgB_2$ by polyvinyl alcohol additives", Supercond. Sci. Technol., 21, 085003, (2008). https://doi.org/10.1088/0953-2048/21/8/085003
  12. S. C. Yan, L. Zhou, G. Yan, Y. F. Lu, " Effect of Mg content in precursors on the volume expansion of $MgB_2$ by two-step reaction method", Physica. C. Supercond., 466, 96-100, (2007). https://doi.org/10.1016/j.physc.2007.06.005
  13. V.P.S. Awana et al., "Role of carbon in enhancing the performance of $MgB_2$ superconductor", Physica C, 467, 67-72 (2007). https://doi.org/10.1016/j.physc.2007.08.011
  14. S. Lee, T. Masui, A. Yamamoto, H. Uchiyam, S. Tajima, "Crystal growth of C-doped $MgB_2$ superconductors: accidental doping and homogeneity", Physica C, 412-414, 31-35, (2004). https://doi.org/10.1016/j.physc.2004.01.036
  15. B. J. Senkowicz et al., "Understanding the route to high critical current density in mechanically alloyed $Mg(B_{1-x}C_x)_2$", Supercondond. Sci. Technol., 20, 650-657, (2007). https://doi.org/10.1088/0953-2048/20/7/011
  16. Y. Katsura, A. Yamamoto, S. Ueda, I. Iwayama, S. Horii, J. Shimoyama, K. Kishio, "Flux pinning properties of undoped and C-doped $MgB_2$ bulks with controlled grain sizes", Physica C, 460-462, 572-573, (2007). https://doi.org/10.1016/j.physc.2007.04.107