참고문헌
- Hwang K. C., Yoon, J. H., Choi, J. H., and Kim, S. C., 2002, "Machinability Characteristics of Inconel 690 Alloys," The Korean Society of Machine Tool Engineers Spring Conference, Vol. 11, pp. 87-94.
- Kim, S. W., Park, H. B., Lee, D. W., and Kim, J. S., 1998, "Evaluation on High-Speed Machining of Inconel 718," Korean Society for Precision Engineering, Spring Conference, pp. 182-185.
- G. Appa Rao, M. Srinivas, D. S. Sarma, 2004, "Effect of thermomechanical working on the microstructure and mechanical properties of hot isostatically pressed superally Inconel 718," Materials Science and Engineering A 383, pp. 201-212. https://doi.org/10.1016/j.msea.2004.05.062
- Adrian Sharman, Richard C. Dewes, David K. Aspimwall, 2001, "Tool Life when high speed mall nose end milling Inconel 718," Journal of Materials Processing Technology 118, pp. 29-35. https://doi.org/10.1016/S0924-0136(01)00855-X
- Choi, H. S., Ko, D. C., and Kim, B. M, 2007, "Variation of microstructures and mechanical properties of hot heading process of super heat resisting alloy Inconel 718," KSME, Spring Conference pp. 362-367.
- Kwon, H. W., Kang, I. S., Kim, J. S., Moon, S. J., and Kim, K. T., 2008, "Machinability evaluation of Inconel 718 by characteristics analysis of tool life," Korean Society of Manufacturing Process Engineers, Spring Conference, pp. 219-213.
- Choi, J., H., 2008, "Improvement of Surface Roughness by the Cutting Speed Control for Turning Operation," Journal of the The Korean Society of Manufacturing Process Engineers, Vol. 7, No. 2, pp. 23-30.
- Chung, E. S., and Suk, N. G., 1982, "A Study on the Dynamic Component of Cutting Force in Turning[I] - Recognition of Chip Flow by the Dynamic Cutting Force Component," Korean Society for Precision, Vol. 5, No.1, pp. 84-93.
- Ha, S. K., and Lee, G. J., 1999, "A Study on the Effects of Cutting Resistance and Surface Roughness in Turning," Journal of the Korean Society of Machine Tool Engineers, Vol. 8, No. 5, pp. 47-53.
- Lim, J. S., Chung, W. J., and Lee, C. M., 2003, "Selection of Bearing Position for Improving Static and Dynamic Stiffness of 40,000rpm High-speed Spindle," Journal of the The Korean Society of Manufacturing Process Engineers, Vol. 8 No. 1, pp. 10-17.
- Jang, S. M., and Cho, M. W., 2003, "A Study on the effect of cutting parameters in face turning based on the Taguchi method," The Korean Society of Machine Tool Engineers, Spring Conference, pp. 111-116.
- Lim, P., and Yang, G. E., 2006, "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 4, pp. 59-64.