참고문헌
- 2009, Johnson, T.V., "Diesel Emission Control in Review," SAE paper 2009-01-0121.
- 2009, Chi, J.N., "Control Challenges for Optimal NOx Conversion Efficiency from SCR Aftertreatment Systems," SAE paper 2009-01-0905.
- 2007, Kim, K.-H., Bae, K.-J., Choi B.-K. and Hong, S.-H., "Denitrification Technology (SCR) Trend and Nanocatalyst," KIC News, Vol.10, No.4.
- 2002, Ueda, M., Ansnno, A., Kondo, T. and Watanabe, Y., "Optimization of Diesel Engine After treatment System with a Model of Hydrocarbon Selective Catalyst Reduction (HC-SCR) and Evolutionary Programming," SAE paper 2002-01-0954.
-
2007, Girard, J.W., Cavataio, G. and Lambert, C.K., "The Influence of Ammonia Slip Catalysts on Ammonia,
$N_2O$ and NOx Emissions for Diesel Engines," SAE paper 2007-01-1572. - 2008, Wang, D.Y., Yao, S., Shost, M., Yoo, J.-H., Cabush, D., Racine, D., Cloudt, R. and Willems, F., "Ammonia Sensor for Closed-Loop SCR Control," SAE paper 2008-01-0919.
- 2007, Romzek, Z.M., "3-D Numerical Study of Flow Mixing in Front of SCR for Different Injection Systems," SAE paper 2007-01-1578.
- 2008, Rajadurai, S., "Improved NOx Reduction Using Wiremesh Thermolysis Mixer in Urea SCR System," SAE 2008-01-2636.
- 2006, 정수진, 이상진, 김우승, 이춘범, "대형 디젤엔진용 SCR 시스템의 암모니아 슬립 억제를 위한 인젝터의 형상 및 위치에 관한 수치적 연구," Transactions of KSAE, Vol.14, No.1, pp.68-78.
- 2008, 정수진, 이천환, "대형 디젤 엔진용 요소분사 SCR 촉매의 DeNOx 성능 향상을 위한 요소수용액의 분사특성 연구," Transactions of KSAE, Vol.16, No.4, pp.165-172.
- 2006, Birkhold, F., Meingast, U., Wassermann, P. and Deutschmann, O., "Analysis of the injection of urea water-solution for automotive SCR DeNOx-systems: Modeling of two-phase flow and spray/wall-interaction," SAE paper 2006-01-0643.
- 2007, Yi, Y., "Development of a 3D numerical model for predicting spray, urea decomposition and mixing in SCR systems," SAE paper 2007-01-3985.
- 2007, 안진렬, 구자형, 박종근, 김종원, "배기가스 정화장치의 입.출구 형상에 따른 배압 및 유동특성에 관한 연구," 한국자동차공학회 2007년도 춘계학술대회 논문집, pp.81-86.
- 2006, Benjamin, S.F. and Roberts, C.A., "Three-Dimensional Modelling of NOx and Particulate Traps Using CFD: A Porous Medium Approach," Applied Mathematical Modelling Vol.31, pp.2446-2460.
- 1999, Traa, Y., Burger, B. and Weitkamp, J., "Zeolite Based Materials for the Selective Catalytic Reduction of NOx with Hydrocarbons," Microporous and Mesoporous Materials Vol.30, pp.3-41. https://doi.org/10.1016/S1387-1811(99)00030-X
- STARCCM+ ver3.04 manual, computational fluid dynamics.
-
1995, Shih, T.-H., Liou, W.W., Shabbir, A. and Zhu, J., "A New k-
$\varepsilon$ Eddy-Viscosity Model for High Reynolds Number Turbulent Flows Model Development and Validation," Computer Fluids, Vol.24, No.3, pp.227-238. https://doi.org/10.1016/0045-7930(94)00032-T - 1993, Weltens, H., Bressler, H., Terres, F., Neumaie,. H. and Rammoser, D., "Optimization of Catalytic Converter Gas Flow Distribution by CFD Prediction," SAE paper 930780.
- 1993, Weltens, H., Bressler, H., Terres, F., Neumaier, H. and Rammoser, D., "Optimization of a catalystic converter gas flow distribution by CFD predictions," SAE paper 930780.
- 1996, Bressler, H., Rammoser, D., Neumaier, H. and Tenes, F., "Experimental and predictive investigation of a close coupled catalytic converter with pulsating flow," SAE paper 960564.