Characteristics of Biodegradable Plastic Drain Board

생분해성 플라스틱 연직배수재의 특성

  • Kim, Ju-Hyong (Dept. of Geotechnical Engineering, Korea Institute of Construction Technology) ;
  • Cho, Sam-Deok (Dept. of Geotechnical Engineering, Korea Institute of Construction Technology) ;
  • Chai, Jong-Gil (Dept. of Geotechnical Engineering, Korea Institute of Construction Technology) ;
  • Sato, Hideyuki (Soil Improvement Division, AOMI Construction)
  • Received : 2010.09.08
  • Accepted : 2010.09.24
  • Published : 2010.09.30

Abstract

The tensile strength, permeability and discharge capacity of biodegradable plastic drain boards made with poly lactic acid (PLA) have been tested and verified prior to their usage at field. Based on test results, the tensile strength of biodegradable plastic drain board made with PLA has relatively lower tensile strain and tensile strength than those of plastic drain board. Performance of PLA filter having good permeability and low opening size is proper for the filter of vertical drain board. In case of improving stiffness of PLA filter, biodegradable plastic drain board also satisfies required discharge capacity as use of vertical drain board too.

본 연구에서는 생분해성 수지를 이용한 연직배수재에 대해 다양한 성능 평가방법을 적용하여 생분해성 플라스틱배수재의 공학적 특성을 분석하였다. 생분해성 플라스틱으로 제작한 연직배수재는 기존 합성수지 연직배수재에 비해 낮은 인장변형률을 가지며 상대적으로 낮은 인장강도를 갖지만, 연직배수재로서 가져야 할 최소한의 인장강도는 발휘하는 것으로 나타났다. 생분해성 플라스틱으로 제작한 필터는 투수성이 좋고 유효구멍크기가 작아 필터의 성능으로 매우 적합한 것으로 나타났다. 또한 생분해성플라스틱 배수재의 통수능은 필터의 강성을 개선하는 경우 국내 시방기준에도 만족할 수 있는 성능을 갖는 것으로 나타났다.

Keywords

References

  1. 김주형, 조삼덕, 池上成洋, 함태규 (2007), "생분해성플라 스틱배수재의 개발현황과 공학적 특성", 대한토목학회 정기학술대회 논문집, pp.2119-2122.
  2. 정지운, (2003), 생분해성 섬유의 특허 동향, 한국특허정보원, pp.1-7.
  3. 한국도로공사 (2005), 고속도로공사 전문시방서.
  4. 한국어항항만공사 (2007), 어항항만공사전문시방서.
  5. 梅木康之, 須山泰行, 八木正 (2005), "生分解性 Plastic drain board 「LACT-BOARD」 の開發と適用", 土木建設技術 Symposium 2005 論文集, 土木學會 建設技術硏究委員會, pp. 29-34.
  6. 湏山泰行 (2006), LACT-BOARD ドレインの開発と適用, 日本 (株)蝶理, 한국건설기술연구원.
  7. KS K 0940 (2008) : 2008, 플라스틱 연직배수재의 배수성 능시험, 한국표준협회
  8. KS K ISO 10319 (2007), 지오텍스타일의 인장강도시험 방법.
  9. KS K ISO 11058 (2007), 지오텍스타일 및 관련제품 -수직 투수성 시험방법.
  10. KS K ISO 12956 (2007), 지오텍스타일 및 관련제품 - 유효 구멍측정방법(습식법).
  11. ISO 14851 (1999), Determination of the ultomate aerobic biodegradability of plastic materials in an aqueous medium.
  12. ISO 14852 (1999), Determination of the ultimate aerobic biodegradability of plastic materials in aqueous medium.
  13. ISO 14855-1 (2005), Determination of the ultimate aerobic biodegradability of plastic materials under controlled composing conditions-Method by analysis of evloved carbon dioxide-Part 1 : General method.
  14. ISO 14855-2 (2007), Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions.
  15. ISO 17556 (2003), Plastics-Determination of the ultimate aerobic biodegradability in soils by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved.
  16. Japan BioPlastic Association (2000), GreenPla List (PL) Formulation Standards, revised in 2007.
  17. Japan BioPlastic Association (2001), Concerning Testing Methods Required for Listing on the PL, revised in 2008.
  18. OECD 301C (1992), Chemical substances:Aerobic biodegradability testing method using activated sludge.
  19. SPS-FITI TM 0004-1709 (2006), 플라스틱 연직배수재의 배수성능 측정방법, FITI.