Transactions of The Korea Fluid Power Systems Society (유공압시스템학회논문집)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지

Experimental Analysis to Behavior of Swivel Angle in Bent-axis type Oil Hydraulic Piston Pump for Heavy Vehicle

대형차량용 사축식 유압 피스톤 펌프의 경전각 거동에 따른 실험적 해석

  • 백일현 (전북대학교 정밀기계공학과) ;
  • 조인성 (전북대학교 정밀기계공학과) ;
  • 정재연 (전북대학교 정밀기계공학부, 공업기술연구센터) ;
  • 오석형 (군산대학교 기계공학부) ;
  • ;
  • 장동혁 (두산모트롤(주))
  • Received : 20090000
  • Accepted : 20100000
  • Published : 2010.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

To improve the performance of the bent-axis type axial piston pump driven by the tapered piston, it is necessary to know the driving characteristics and mechanism of the tapered piston and the cylinder block. Since each piston not only rotates on its axis and reciprocates in the cylinder bore, but also revolves around the axis of the driving shaft, it is difficult to analyze the driving mechanism theoretically. The theoretical mechanism for the bent-axis type axial piston pump is studied by using the geometrical method. The driving range of the tapered piston is determined by theoretical equations. The experimental results show that the cylinder block is driven by one tapered piston in a limited range and the core parameters such as driving factor of the piston and the ahead delay angle influenced performance of the bent-axis type axial piston pump.

Keywords

References

  1. I.H. Back, I.S. Cho, J.Y. Jung, L.hong, "Analysis of piston behavior according to eccentricity ratio of disk in bent-axis type piston pump", Journal of Mechanical Science and Technology, Vol.22, No.4, pp.1726-1733, 2008. https://doi.org/10.1007/s12206-008-0604-5
  2. Mansour A. Karkoub, Osama E. Gad,Mahmoud G. Rabie, "Predicting axial piston pump performance using neural networks", Mechanism and Machine Theory, Vol. 34, No 8, pp. 1211-1226, 1999. https://doi.org/10.1016/S0094-114X(98)00086-X
  3. Jong-Ki Kim, Jae-Youn Jung, "Driving Mechanism of Tapered Pistons in Bent-Axis Design Axial Piston Pumps", KSME International Journal, Vol.17, No.2, pp.181-186, 2003. https://doi.org/10.1007/BF02984388
  4. Yeh-Sun Hong, Yoon-Ho Doh, "Analysis on the Friction Losses of a Bent-Axis Type Hydraulic Piston Pump", KSME International Journal, Vol.18, No.9, pp. 1668-1679, 2004.