Abstract
We can see the motion blur phenomenon on theedge of the moving picture when it moves in the LCDs. To reduce this phenomenon, we suggested a new over-deriving method, implemented on the board XUP Virtex-2 Pro Development System by using Virtex-2 Pro XUP XC2VP30 and improved the Motion Blur. In this method, we did not use additional parts except for a SDRAM. Hardware implementation for IP and data interface were handled in software. In this paper, we used the moving bar and the moving video image as a design model. We also showed that the afterimage was reduced and the vivid moving images was displayed. through this method.
정지해 있는 물체가 디스플레이 될 때는 상이 선명하지만 움직이는 물체가 디스플레이 될 때는 물체의 가장자리가 번져 보이는 Motion Blur현상이 일어난다. 이러한 문제점을 개선하기 위하여 본 논문에서는 XUP Virtex-II Pro Development System을 이용하여 Virtex-II Pro XUP XC2VP30 보드에 Motion Blur를 줄이는 Overdrive 기술을 구성하는 것을 목표로 하였다. 구현된 플랫폼은 하드웨어 IP로 구현하였으며 어플리케이션 및 모델 데이터 인터페이스는 소프트웨어에서 처리하도록 하였다. 본 설계에서는 임의의 동영상 모델을 이용하여 동영상의 이동 속도(Pixel/Frame)에 따른 Blur의 정도와 기존의 Overdrive를 제어하였을 경우 발생하는 역잔상을 개선하였고, 동영상에서 보다 선명한 화질이 구현될 수 있음 보여주었다.