참고문헌
- K. H. Lee, "Membrane separation of carbon dioxide", Membrane Journal, 4, 78 (1994).
-
J. H. Park and I. H. Baek, "Status and prospect of pre-combustion
$CO_2$ capture technology", Korean Ind. Chem. News, 12, 3 (2009). - S. Y. Oh and K. S. Choi, "Current status of the application of gas separation membranes", Membrane Journal, 4, 63 (1994).
- J. H. Kim, W. I. Sohn, S. H. Choi, and S. B. Lee, "Preparation of asymmetric polyethersulfone hollow fiber membranes for flue gas separation", Membrane Journal, 15, 147 (2005).
- M. D. Dolan, N. C. Dave, A. Y. Ilyushechkin, L. D. Morpeth, and K. G. Mclennan, "Composition and operation of hydrogen-selective amorphous alloy membranes", J. Membr. Sci., 285, 30 (2006). https://doi.org/10.1016/j.memsci.2006.09.014
- J. Han, S. P. Yoon, S. W. Nam, T. H. Lim, S. A. Hong, and J: Kim, "A study on contamination of hydrogen permeable Pd-based membranes", Trans. of the Korean Hydrogen and New Energy Society, 14, 17 (2003).
- J. W. Phair and S. P. S. Badwal, "Review of proton conductors for hydrogen separation", Ionics, 12, 103 (2006). https://doi.org/10.1007/s11581-006-0016-4
- D. W. Kim, J. W. Park, S. H. Kim, and J. S. Park, "A study on the Pd-Ni alloy hydrogen membrane using the sputter deposition", J. Korean Institute of Suiface Eng., 37, 249 (2004).
- K. Takeuchi, C. K. Loong, J. W. Richardson, J. Guan, S. E. Dorris, and U. Balachandran, "The crystal structures and phase transitions in Y -doped BaCe03: their dependence on Y concentration and hydrogen doping", Solid State Ion., 138, 63 (2000). https://doi.org/10.1016/S0167-2738(00)00771-2
-
M. Cai, S. Liu, K. Efimov, J. g. Caro, A. Feldhoff, and H. Wang, "Preparation and hydrogen penneation of
$BaCe_{0.95}Nd_{0.05}O_{3-\delta}$ membranes", J. Membr. Sci., 343, 90 (2009). https://doi.org/10.1016/j.memsci.2009.07.011 -
G. C. Mather, D. Poulidi, A. Thursfield, M. J. Pascual, J. R. Jurado, and I. S. Metcalfe, "Hydrogen-penneation characteristics of a
$SrCeO_3$ -based ceramic separation membrane: thermal, ageing and surface-modification effects", Solid State Ion., In Press. -
C. Zuo, T. H. Lee, S. E. Dorris, U. Balachandran, and M. Liu, "Composite
$Ni-Ba(Zr_{0.1}Ce_{0.7}Y_{0.2})O_3$ membrane for hydrogen separation", J. Power Sources, 159, 1291 (2006). https://doi.org/10.1016/j.jpowsour.2005.12.042 - S. Okada, A. Mineshige, T. Kikuchi, M. Kobune, and T. Yazawa, "Cennet-type hydrogen separation membrane obtained from fine particles of high temperature proton-conductive oxide and palladium", Thin Solid Films, 515, 7342 (2007). https://doi.org/10.1016/j.tsf.2007.02.095
- U. Balachandran, T. H. Lee, L. Chen, S. J. Song, J. J. Picciolo, and S. E. Dorris, "Hydrogen separation by dense cennet membranes", Fuel, 85, 150 (2006). https://doi.org/10.1016/j.fuel.2005.05.027
- M. V. Mundschau, X. Xie, and A. F. Sammells, "Carbon Dioxide Capture for Storage in Deep Geologic Formations", pp. 291-306, Elsevier Science, Amsterdam (2005).
- T. Ozaki, Y. Zhang, M. Komaki, and C. Nishimura, "Preparation of palladium-coated V and V -15Ni membranes for hydrogen purification by electro less plating technique", Int. J. Hydrog. Energy, 28, 297 (2003). https://doi.org/10.1016/S0360-3199(02)00065-4
- R. E. Buxbaum and T. L. Marker, "Hydrogen transport through non-porous membranes of palladium-coated niobium, tantalum and vanadium", J. Membr. Sci., 85, 29 (1993). https://doi.org/10.1016/0376-7388(93)85004-G
- K. S. Rothenberger, B. H. Howard, R. P. Killmeyer, A. V. Cugini, R. M. Enick, F. Bustamante, M. V. Ciocco, B. D. Morreale, and R. E. Buxbaum, "Evaluation of tantalum-based materials for hydrogen separation at elevated temperatures and pressures", J. Membr. Sci., 218, 19 (2003). https://doi.org/10.1016/S0376-7388(03)00134-0