DOI QR코드

DOI QR Code

Effects of RHS face deformation on the rigidity of beam-column connection

  • Hadianfard, M.A. (Civil and Environmental Eng. Department, Shiraz University of Technology) ;
  • Rahnema, H. (Civil and Environmental Eng. Department, Shiraz University of Technology)
  • 투고 : 2009.12.22
  • 심사 : 2010.10.29
  • 발행 : 2010.11.25

초록

The rigid connections of I-beams to Rectangular Hollow Sections (RHS) in steel structures usually behave as semi-rigid connection. This behavior is directly related to the column face deformation. The deformation in the wall of RHS column in the connection zone causes a relative rotation between beam end and column axis, which consequently reduces the rigidity of beam-column connection. In the present paper, the percentages of connection rigidity reduction for serviceability conditions are evaluated by using the finite element analysis. Such percentages for RHS columns without internal stiffeners are considerable, and can be calculated from presented graphs.

키워드

참고문헌

  1. Bae, K.W., Park, K.S., Choi, Y.H., Lee, S.S. and Stiemers, S. (2009), "Structural resistance of longitudinal double plates-to-RHS connections", J. Constr. Steel Research, 65(4), 940-947. https://doi.org/10.1016/j.jcsr.2008.06.001
  2. Cabrero, J.M. and Bayo, E. (2005), "Development of practical design methods for steel structures with semirigid connections", Eng. Struct., 27(8), 1125-1137. https://doi.org/10.1016/j.engstruct.2005.02.017
  3. Cao, J.J., Packer, J.A. and Kosteski, N. (1998), "Design guidelines for longitudinal plate to HSS connections", J. Struct. Eng-ASCE, 124(7), 784-791. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(784)
  4. Chen, W.F. and Lui, E.M. (1991), Stability design of steel frames, CRC Press Inc.
  5. Frye, M.J. and Morris, G.A. (1976), "Analysis of flexibly connected steel frames", Can. J. Civil. Eng., 2(3), 280-291.
  6. Hadianfard, M.A. and Razani, R. (2003), "Effects of semi-rigid behavior of connections in the reliability of steel frames", J. Struct. Safety, 25(2),123-138. https://doi.org/10.1016/S0167-4730(02)00046-2
  7. Han, L.H., Yang, Y.F. and Tao, Z. (2003), "Concrete-filled thin-walled steel SHS and RHS beam-columns subjected to cyclic loading", Thin-Wall. Struct., 41(9), 801-833. https://doi.org/10.1016/S0263-8231(03)00030-2
  8. IIW(1989), Design recommendations for hollow section joints predominantly statically loaded, International Institute of Welding, IIW Doc., XV-701, Helsinki, Finland.
  9. Kato, B. and Mukai, A. (1985), "Bolted tension flanges joining square hollow section members", J. Constr. Steel Res., 5(3), 163-177. https://doi.org/10.1016/0143-974X(85)90001-X
  10. Kishi, N. and Chen, W.F. (1990), "Moment-rotation relations of semi-rigid connections with angles", J. Struct. Eng-ASCE, 116(7), 1813-1834. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813)
  11. Kishi, N., Chen, W.F., Goto, Y. and Matsuoka, K.G. (1993), "Design aid of semi-rigid connections for frame analysis", Eng. J-AISC, 30(3), 90-107.
  12. Kosteski, N. and Packer, J.A. (2003), "Longitudinal plate and through plate to hollow structural section welded connections", J. Struct. Eng-ASCE, 129(4), 478-486. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(478)
  13. Miura, K., Makino, Y., Kurobane, Y., Tanaka, M., Tokudome, K. and Vegte, G.J. (2001), "Testing of beam-to-RHS column connections without weld access holes", Proceedings of Eleventh International Offshore and Polar Engineering Conference, Stavanger, Norway, 17-22.
  14. Packer, J.A., Mashiri, F.R., Zhao, X.L. and Willibald, S. (2007), "Static and fatigue design of CHS-to-RHS welded connections using a branch conversion method", J. Constr. Steel Res., 63(1), 82-95. https://doi.org/10.1016/j.jcsr.2006.02.011
  15. Satish Kumar, S.R. and Prasada Rao, D.V. (2006), "RHS beam-to-column connection with web openingexperimental study and finite element modeling", J. Constr. Steel Res., 62(8), 739-746. https://doi.org/10.1016/j.jcsr.2005.11.016
  16. Settleco, P. (1993), "Pinned I beam to RHS columns with stiffeners", J. Struct. Eng-ASCE, 107(7), 2214-2227.
  17. Ting, L.C., Shanmugam, N.E. and Lee, S.L. (1993), "Design of I-beam to box-column connections stiffened externally", Eng. J-AISC, 30(4), 141-149.
  18. Xu, L. and Grierson, D.E. (1993), "Computer-automated design of semi-rigid steel frameworks", J. Struct. Eng-ASCE, 119(6), 1740-1760. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1740)

피인용 문헌

  1. Component-based mechanical models for axially-loaded through-diaphragm connections to concrete-filled RHS columns vol.102, 2014, https://doi.org/10.1016/j.jcsr.2014.06.016
  2. Experimental and numerical analysis of beam to column joints in steel structures vol.12, pp.4, 2018, https://doi.org/10.1007/s11709-017-0457-z
  3. Experimental study on two types of new beam-to-column connections vol.11, pp.4, 2011, https://doi.org/10.12989/scs.2011.11.4.291
  4. Numerical buckling analysis of thin steel plates with centered hexagonal perforation through constructal design method vol.41, pp.8, 2019, https://doi.org/10.1007/s40430-019-1815-7