A Study on the Modal Characteristics of a Large-sized Military Truck

군용 대형트럭의 고유 진동 특성에 관한 연구

  • Received : 2010.03.15
  • Accepted : 2010.05.04
  • Published : 2010.11.01

Abstract

Due to test facility and specialty, it is physically difficult to conduct the modal tests of large-sized structures such as truck, bus and airplane. So, in case of a large-sized truck, the mode analysis on a full vehicle model comprised of reliable cabin, frame, and deck has been generally performed. However, the reliability of overall vibrational characteristics of the analytic model has not been fairly guaranteed by the testified models of each subsystem owing to the existence of cab suspension and the nonlinear mounting between a chassis frame and a special deck system. In this paper, a method to find out the modal characteristics of a large-sized military truck is presented. New modal test equipment is developed to set the boundary conditions of three military truck variants as close as a free-free condition. And the mode analysis method using coupled structure and dynamic models is established to consider the above-mentioned dynamic non-linearities of the vehicle itself. The usefulness of the suggested method is verified by comparing with the modal test results. Finally, the modal parameters of the final variant are extracted using the proved analytic method.

Keywords

References

  1. L. P. Siqueira and F. Nogueira, "Application of Modal Analysis and Operating Deflection Shapes on the Study of Trucks and Buses Dynamic Behavior," SAE 2001-01-2780, 2001.
  2. F. G. Ferraz, A. L. Cherman, D. S. Abreu and R. Soares, "Experimental Modal Analysis on Automotive Development," SAE 2003-01-3610, 2003.
  3. C. Y. Kim, T. S. Oh and H. Y. Kim, "Research of the Dynamic Behavior of Express Bus Using the Running Mode Test," Spring Conference Proceedings, KSAE, pp.491-496, 2003.
  4. K. S. Song, H. J. Yoon, B. M. Hur and J. S. Nam, "A Study on the Vibration Characteristics of the Steering System Using Mode Analysis and Modal Testing," Fall Conference Proceedings, KSAE, pp.1797-1804, 2006.
  5. L. Shunming, Z. Zemin and Q. Jie, "The Vibration Modal Tests and Analysis of Automobile Gearbox on Different Constraint Conditions," SAE 2009-01-0773, 2009.
  6. J. M. Lee, J. S. Kang, J. R. Yun, S. W. Bae and T. O. Tak, "Modal Analysis of Suspension System with Kinematic Constraints and Elastic Elements," Transactions of the KSAE, Vol.8, No.1, pp.110-123, 2000.
  7. Y. Isomura, T. Ogawa and H. Monna, "New Simulation Method Using Experimental Modal Analysis for Prediction of Body Deformation during Operation," SAE 2001-01- 0494, 2001.
  8. J. H. Kim, H. W. Lee, J. M. Lee and D. H. Yoo, "Vibration Analysis of Steering System for Shimmy Reduction," Fall Conference Proceedings, KSAE, pp.1108-1116, 2005.