Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Vibration Analysis of Body Mount System on Chassis Frame

섀시 프레임 상의 바디 마운트계의 진동해석

  • Lee, Chang-Ro (Department of Mechanical and Automotive Engineering, Woosuk University) ;
  • Ryu, Bong-Jo (Division of Mechanical Engineering, Hanbat National University)
  • 이창노 (우석대학교 기계자동차공학과) ;
  • 류봉조 (한밭대학교 기계공학부)
  • Received : 2009.08.18
  • Accepted : 2009.10.19
  • Published : 2010.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the static and dynamic characteristics of body mount system which are to be considered in the early design stage. At every location of body mount the static load and dynamic response to road input were calculated using the half car model. Normal mode analysis for the half car model was also performed. In the analysis the design parameters such as the stiffness of mount rubbers and their distribution on mount location were examined for improving ride comfort especially in the lower frequency range.

Keywords

References

  1. Japan Rail Road Vehicle Engineering, Vibration Isolation Rubber, Modern Engineering Press, p.208, 1975.
  2. S. Hayashi and S. Kano, "Optimization Method for Distribution and Specification of Sub-frame mounting," Transactions of JSAE, Vol.52, No.2, pp.147-152, 1994.
  3. W. B. Jeong, K. G. Jeong and T. M. Go, "Estimation of Rigid Body Properties for Mounted Structure Systems," Spring Conference Proceedings of KSME, pp.515-518, 1993.
  4. K. C. Kim and J. H. Lee, "Design Optimization Analysis of Body Attachments for NVH Performance Improvement," Spring Conference Proceedings, KSAE, pp.752-759, 2002.
  5. S. Y. Lee, Y. H. Kim and K. S. Lee, "Road Noise Improvement Using Chassis Mounting Point Local Stiffness Estimation," Spring Conference Proceedings, KSAE, pp.1125-1130, 2008.
  6. J. Y. Kuk and J. H. Lim, "A Study on Vibration Characteristics of Engine Mount System of a Medium Duty Truck-at the KeyOn/Off," Transactions of KSAE, Vol.6, No.4, pp.97-102, 2008.