Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Use of Multifractors in Paper Mills for Recycled Fibers (I) - Slot screen cases -

고지섬유의 효율적 이용을 위한 Multifractor의 활용분석 (I) - Slot screen을 사용하는 경우 -

  • Seo, Yung-Bum (Dept. of Bio-materials, College of Life Science and Agriculture, Chungnam National University) ;
  • Lee, Min-Woo (Dept. of Bio-materials, College of Life Science and Agriculture, Chungnam National University) ;
  • Kim, Young-Wook (Dept. of Bio-materials, College of Life Science and Agriculture, Chungnam National University)
  • Received : 2010.02.03
  • Accepted : 2010.03.07
  • Published : 2010.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

Four waste paper mills in Korea, where multifractors, devices for fiber fractionation, were installed, were selected to investigate how effectively and how differently the multifractors were used. They all used slot-type screens. Effective fiber fractionations by fiber length were expected by the multifractors, but in reality, they were used for selecting fiber furnishes that were flexible and hydrated. Flakes, which meant large fiber bundles, were rejected effectively by the multifractors. There existed a high regression coefficient between the fiber length differences and the freeness differences of the accepted and the rejected fiber furnishes.

Keywords

References

  1. Lee, J.H., Seo, Y.B., Choi, C.H., and Jeon, Y., Influence of chemical and mechanical treatments of the screened short fibers from OCC on paper properties, J. Korea Tappi 33(4): 8-14 (2001).
  2. Lee, J.H., Seo, Y.B., Jeon, Y., Lee, H.L., and Shin, J.H., Strength property improvement of OCC-based paper by chemical and mechanical treatments, J. Korea Tappi 32(2): 8-15 (2000).
  3. Bliss T., A study of fiber fractionation using centrifugal cleaners, Pulp and Paper, 88 (1987).
  4. Olson, J., Allison, B., Friesen, T., and Peters, C., Fiber fraction for high porosity sack kraft paper, Tappi J. 84(6):10 (2001).
  5. Olson, J.A., Fiber length fractionation caused by pressure screening. Part3: Contoured slotted screen plates, Pulp and Paper Report 1415 (1999).
  6. Casey, J.P., Pulp and Paper, 3rd edition, Vol. II, A Wiley-Interscience Publication, John Wiley & Sons, pp845-854 (1980).
  7. Defoe, R.J., Optimal refining conditions for development of OCC pulp properties, Tappi J., 76(2):157-161(1993).