DOI QR코드

DOI QR Code

A Study on Compressive Strength of Carbon/epoxy Composite Structure Repaired with Bonded Patches after Impact Damage

충격 손상된 카본/에폭시 복합재 구조의 패치 접착 보수 방안 적용 후 압축 강도 특성 평가

  • 공창덕 (조선대학교 항공우주공학과) ;
  • 박현범 (조선대학교 항공우주공학과) ;
  • 임성진 (조선대학교 항공우주공학과) ;
  • 신철진 (한국항공우주산업(주))
  • Published : 2010.10.30

Abstract

In this study, repair and maintenance schemes of the damaged composite structure was investigated, and a repair process of the carbon/epoxy laminate composite structure was investigated numerically and experimentally. The composite laminates were damaged by drop weight type impact test machine. The damaged composite structure was repaired using external patch repair method after removing damaged area. The compressive strength test and analysis results after repairing the impact damaged specimens were compared with the compressive strength test and analysis results of undamaged specimens and impact damaged specimens. Finally, the strength recovery capability by repairing were investigated.

본 연구에서는 손상된 복합재 구조의 유지 보수 방안에 대한 연구를 수행하였다. 복합재료 구조의 손상 수리 방안을 제시하고 수리 절차를 카본/에폭시 적층판 복합재 구조에 적용하여 시편 시험 및 수치 해석을 통해 분석하였다. 손상은 중량 낙하식 충격 시험기를 활용하여 복합재 구조 시편에 충격 손상으로 모사하였다. 손상된 복합재 적층판 구조는 충격 손상 부위 제거 후 외부 패치 수리 기법을 적용하여 수리하였다. 충격 손상 후 유지 보수된 시편과 손상이 없는 시편의 압축 강도를 실험적 및 해석적으로 비교 분석하였다. 이를 바탕으로 유지 보수된 시편의 강도 회복 능력을 고찰하였다.

Keywords

References

  1. 국토 해양부, "소형 항공기급 인증기 개발," 1차년도 연구 결과보고서, 2008.
  2. MIL-HDBK-17-3F, Composite Materials Handbook.
  3. A. Mahadesh Kumar et al., "Optimum design of symmetric composite patch repair to centre cracked metallic sheet," Composite Structures 49, 2002, 285-292.
  4. V. Kradinov et al., "Bolted patch repair of composite panels with a cutout," Composite Structures 56, 2002, 423-444. https://doi.org/10.1016/S0263-8223(02)00027-2
  5. R. Jones et al., "Application of constitutive modelling and advanced repair technology to F111C aircraft," Composite Structures 66, 2004, 145-157. https://doi.org/10.1016/j.compstruct.2004.04.032
  6. R. Jones et al., "Application of constitutive modelling and advanced repair technology to F111C aircraft," Composite Structures 66, 2004, 145-157. https://doi.org/10.1016/j.compstruct.2004.04.032
  7. Shin-etsu Fujimoto et al., "Identification of crack and disbond fronts in repaired aircraft strcutural panels with bonded FRP composite pateches," Composite Structures 77, 2007, 533-545. https://doi.org/10.1016/j.compstruct.2005.08.005
  8. ASTM D7136, "Standard Test method for Measuring the Damage Resistance of A Fiber-Reinforced Polymer Matrix Composite to A Drop-Weight Impact Event," 2005.
  9. Serge Abrate, "Impact on Composite Structures," Cambridge University Press, 1998.
  10. ASTM D7137, "Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates," 2005.
  11. Keith B. Armstron, L. Graham Bevan, Willliam F. Cole 2, "Care and Repair of Advanced Composites," SAE International, 2005.

Cited by

  1. A Study on 4 Point Bending Strength of Carbon/epoxy Face Sheet and Honeycomb Core Sandwich Composite Structure after Open Hole Damage vol.27, pp.2, 2014, https://doi.org/10.7234/composres.2014.27.2.077
  2. Investigation on Damage Tolerance of Thick Laminate for Aircraft Composite Structure vol.25, pp.4, 2012, https://doi.org/10.7234/kscm.2012.25.4.105
  3. Test and Finite Element Analysis on Compression after Impact Strength for Laminated Composite Structures of Unidirectional CFRP vol.29, pp.6, 2016, https://doi.org/10.7234/composres.2016.29.6.321
  4. 에폭시 기지 입자 강화 GFRP를 사용한 계단형 패치 보수법이 고온 고습 환경하에서 재료의 물성 회복에 미치는 영향 vol.31, pp.3, 2010, https://doi.org/10.7234/composres.2018.31.3.088