DOI QR코드

DOI QR Code

The Stable Rechargeability of Secondary Zn-Air Batteries: Is It Possible to Recharge a Zn-Air Battery?

  • Lee, Sang-Heon (Department of Chemistry, Korea University) ;
  • Jeong, Yong-Joo (Department of Chemistry and Institute of Basic Science, Sungshin Women's University) ;
  • Lim, Si-Hyoun (Department of Chemistry and Institute of Basic Science, Sungshin Women's University) ;
  • Lee, Eun-Ah (Department of Chemistry and Institute of Basic Science, Sungshin Women's University) ;
  • Yi, Cheol-Woo (Department of Chemistry and Institute of Basic Science, Sungshin Women's University) ;
  • Kim, Keon (Department of Chemistry, Korea University)
  • Published : 2010.02.27

Abstract

The rechargeable Zn-air battery is considered as one of the potential candidates for the next generation secondary batteries due to its many advantages. However, its further applications and commercialization have been limited by the complexity of the reactions on air electrode which are oxygen reduction and evolution reactions (ORR/OER) upon discharging and charging processes, respectively. In the present study, lanthanum was impregnated into a commercial Pt/C gas diffusion electrode, and it clearly verified significantly enhanced cycling stability and reversibility. The results presented in this study show the possibility of repeated charge/discharge processes for Zn-air batteries with a La-loaded air electrode, and they demonstrate the potential as a promising next generation secondary battery.

Keywords

References

  1. J. W. Evans and G. Savaskan, ‘A zinc-air cell employing a packed bed anode’ J. Appl. Electrochem., 105, 21 (1991).
  2. T. Huh, G. Savaskan, and J. W. Evans, ‘Further studies of a zinc-air cell employing a packed bed anode part II: Regeneration of zinc particles and electrolyte by fluidized bed electrodeposition’ J. Appl. Electrochem., 916, 22(1992).
  3. C. W. Lee, K. Sathiyanarayanan, S. W. Eom, H. S. Kim, and M. S. Yun, ‘Novel electrochemical behavior of zinc anodes in zinc/air batteries in the presence of additives’ J. Power Sources, 159, 1474 (2006). https://doi.org/10.1016/j.jpowsour.2005.11.074
  4. J. C. Salas-Morales and J. W. Evans, ‘Further studies of a zinc-air cell employing a packed bed anode Part III: Improvements in cell design’ J. Appl. Electrochem., 858, 24 (1994).
  5. G. Savaskan, T. Huh, and J. W. Evans, ‘Further studies of a zinc-air cell employing a packed bed anode part I: Discharge’ J. Appl. Electrochem., 909, 22 (1992).
  6. K. A. Striebel, F. R. McLarnon, and E. J. Cairns, ‘Laboratory-scale evaluation of secondary alkaline zinc batteries for electric vehicles’ J. Power Sources, 47(1), (1994) .
  7. C. -C. Yang, J. M. Yang, and C.-Y. Wu, ‘Poly(vinyl alcohol)/poly(vinyl chloride) composite polymer membranes for secondary zinc electrodes’ J. Power Sources, 669, 191 (2009).
  8. J. Goldstein, I. Brown and B. Koretz, ‘New developments in the Electric Fuel Ltd. zinc/air system’ J. Power Sources, 171, 80 (1999). https://doi.org/10.1016/S0378-7753(98)00260-2
  9. C. -C. Yang, W. -C. Chien, C. L. Wang, and C.-Y. Wu, ‘Study the effect of conductive fillers on a secondary Zn electrode based on ball-milled ZnO and $Ca(OH)_2$ mixture powders’ J. Power Sources, 435, 172 (2007).
  10. C. -C. Yang, W. -C. Chien, P. -W. Chen, and C. -Y. Wu, ‘Synthesis and characterization of nano-sized calcium zincate powder and its application to Ni–Zn batteries’ J. Appl. Electrochem., 39, 39 (2009). https://doi.org/10.1007/s10800-008-9637-9
  11. R. Jain, T. C. Adler, F. R. McLarnon, and E. J. Cairns, ‘Development of long-lived high-performance zinccalcium/ nickel oxide cells’ J. Appl. Electrochem., 1039, 22 (1992).
  12. E. G. Gagnon, ‘Effect of Ten Weight Percent KOH Electrolyte on the Durability of Zinc/Nickel Oxide Cells Containing Zinc Electrodes with Calcium Hydroxide’ J. Electrochem. Soc., 3173, 138 (1991).
  13. V. Nikolova, P. Iliev, K. Petrov, T. Vitanov, E. Zhecheva, R. Stoyanova, I. Valov, and D. Stoychev, ‘Electrocatalysts for bifunctional oxygen/air electrodes’ J. Power Sources, 727, 185 (2008).
  14. Y. -K. Shun and C. -L. Lou. Catalytic air cathode for airmetal batteries In US Patent; High-Density Energy, Inc. (Azusa, CA) 2000.
  15. X. Wang, P. J. Sebastian, M. A. Smit, H. Yang, and S. A. Gamboa, ‘Studies on the oxygen reduction catalyst for zincair battery electrode’ J. Power Sources, 278, 124 (2003).
  16. M. S. Islam and D. J. Ilett, ‘Defect structure and oxygen migration in the $La_2O_3$ catalyst’ Solid State Ionics., 54, 72 (1994).
  17. J. Wahlen, S. De Hertogh, D. E. De Vos, V. o. Nardello, S. h. Bogaert, J. -M. Aubry, P. L. Alsters, and P. A. Jacobs, ‘Disproportionation of hydrogen peroxide into singlet oxygen catalyzed by lanthanum-exchanged zeolites’ J. Catal., 422, 233 (2005).
  18. D. Coates and A. Charkey Handbook of Batteries; McGraw-Hill: New York, (2002).
  19. A. Renuka, A. Veluchamy, and N. Venkatakrishnan, ‘Effect of carbonate ions on the behaviour of zinc in 30% KOH’ J. Power Sources, 381, 34 (1991).
  20. C. Chakkaravarthy, A. K. A. Waheed, and H. V. K. Udupa, ‘Zinc-air alkaline batteries-A review’ J. Power Sources, 6, 203 (1981). https://doi.org/10.1016/0378-7753(81)80027-4
  21. M. Alifanti, J. Kirchnerova, B. Delmon, and D. Klvana, ‘Methane and propane combustion over lanthanum transition-metal perovskites: role of oxygen mobility’ Aool. Catal. A-Gen., 167, 262 (2004).
  22. R. N. Singh and B. Lal, ‘High surface area lanthanum cobaltate and its A and B sites substituted derivatives for electrocatalysis of $O_2$ evolution in alkaline solution’ Int. J. Hydrogen Energ., 45, 27 (2002).
  23. B. Klingenberg and M. A. Vannice, ‘Influence of Pretreatment on Lanthanum Nitrate, Carbonate, and Oxide Powders’ Chem. Mater., 2755, 8 (1996).
  24. A. -E. Gobichon, J. -P. Auffréic, and D. Lou, ‘Thermal decomposition of neutral and basic lanthanum nitrates studied with temperature-dependent powder diffraction and thermogravimetric analysis’ Solid State Ionics, 51, 93 (1996).

Cited by

  1. In operando monitoring of the state of charge and species distribution in zinc air batteries using X-ray tomography and model-based simulations vol.16, pp.40, 2014, https://doi.org/10.1039/C4CP02878C
  2. Electrochemical characterizations of LaMO3 (M = Co, Mn, Fe, and Ni) and partially substituted LaNi x M1−x O3 (x = 0.25 or 0.5) for oxygen reduction and evolution in alkaline solution vol.45, pp.4, 2015, https://doi.org/10.1007/s10800-015-0798-z
  3. Components in Zn Air Secondary Batteries vol.16, pp.1, 2013, https://doi.org/10.5229/JKES.2013.16.1.9
  4. Comparison of electrochemical performance for zinc anode via various electrolytes and conducting agents in Zn-air secondary batteries vol.23, pp.7, 2017, https://doi.org/10.1007/s11581-017-2005-1
  5. Spectroelectrochemical investigation of the anodic and cathodic behaviour of zinc in 5.3 M KOH vol.45, pp.1, 2015, https://doi.org/10.1007/s10800-014-0755-2
  6. Alkaline aqueous electrolytes for secondary zinc-air batteries: an overview vol.40, pp.8, 2016, https://doi.org/10.1002/er.3499
  7. Analyzing transport paths in the air electrode of a zinc air battery using X-ray tomography vol.40, 2014, https://doi.org/10.1016/j.elecom.2014.01.001
  8. Plasma in-liquid method for reduction of zinc oxide in zinc nanoparticle synthesis vol.2, pp.2, 2015, https://doi.org/10.1088/2053-1591/2/2/025004
  9. Effect of Gas Diffusion Layer on La0.8Sr0.2CoO3Bifunctional Electrode for Oxygen Reduction and Evolution Reactions in an Alkaline Solution vol.27, pp.6, 2016, https://doi.org/10.7316/KHNES.2016.27.6.677