참고문헌
- Materials Reliability Program : Alloy 82/182 Butt Weld Safety Assessment for U. S. PWR Plant Designs (MRP-113), EPRI, Palo Alto, CA: 2004, 1009549
- Materials Reliability Program : Crack Growth Rates for Evaluating Primary Water Stress Corrosion Cracking (PWSCC) of Alloy 82, 182, and 132 Welds (MRP-115), EPRI. Palo Alto, CA, 2004, 1006696
- Materials Reliability Program : Advanced FEA Evaluation of Growth of Postulated Circumferential PWSCC Flaws in Pressurizer Nozzle Dissimilar Metal Welds (MRP-216): Evaluations Specific to Nine Subject Plants, EPRI, Palo Alto, CA, 2007, 1015383
- M.W. Kim, Y.J. Kim, E.S. Yoon, K.H. Na and Y.S. Park : Effect of Curve Fitting of Residual Stress on Crack Growth Analysis in Alloy 82/182 Repair Weld of a Nozzle, Proceedings on 2009 KPVP Annual Conference, 2009, 277-278 (in Korean)
- E.J. Park, E.J. Kim and S.H. Yoo : An Analysis of the Fatigue Crack Opening Behaviour in the Welding Residual Stress Field by the Finite Element Method, Journal of the KWS, 21-6 (2003), 77-83 (in Korean)
- S.C. Kim and Y.B. Lee : The Application of Forman Equation for Fatigue Crack Propagation in Welding Residual Stress Region, Journal of the KWS, 5-1 (1987), 42-48 (in Korean)
- Y.B. Lee and N.I. Cho : Redistribution of Welding Stress and its Effects on Fatigue Crack Propagation, Journal of the KWS, 13-4 (1995), 155-162 (in Korean)
- S.H. Song, H. Kim and J.S. Bae : The Study of Fatigue Crack Propagation Behavior in the Welding Residual Stress Field by Superposition Method, J. of the Korean Welding Society Precision Engineering, 11-4 (1994), 47-52 (in Korean)
- P. Dong and F.W. Brust : Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components: A Millennium Review and Beyond, Journal of Pressure Vessel Technology, 122 (2000), 329-338 https://doi.org/10.1115/1.556189
- F.W. Brust, P. Dong and J. Zhang : Influence of Residual Stresses and Weld Repairs on Pipe Fracture, ASME PVP, 347 (1997), 173-191
- P. Dong, J. Zhang and G. Rawls : Crack Growth Behavior in Residual Stress Field in Vessel Type Structures, WRSC-MS- 2003-00113 (2003)
- S.N. Atluri : Computational Methods in the Mechanics of Fracture, Amsterdam, North Holland, 1986
- J.H. Park and S.N. Atluri :Mixed mode fatigue growth of curved cracks emanating from fastener holes in aircraft lap joints, Computational Mechanics, 21 (1998), 477-482 https://doi.org/10.1007/s004660050326
- J.H. Park, M.W. Kim, and S.N. Atluri : Analysis of multiple curved cracks embedded in an isotropic plate using the finite element alternating method, Computer Modeling and Simulation in Engineering, 4 (1999), 58-63
- ABAQUS/Standard Version 6.5, HK&S Inc (1997)
- ASME Boiler & Pressure Vessel Committee : ASME B&PV Code, Sec. II, Part D, Properties (2001)
- Tae-Kwang Song, et. al. : Results and analyses for simulational round robin on welding residual stress prediction in nuclear power plant nozzle, 2008 KSME Autumm Conference, KSME, 2008 (in Korean)
- KEPRI-94Z-J12, Development of A Crack Growth Analysis Program for Reactor Vessel Head Penetration, KEPRI, 1996 (in Korean)
- Section XI Task Group for Piping Flaw Evaluation of ASME Code : Evaluation of Flaws in Austenitic Steel Piping, Transactions of the ASME, J. of Pressure Vessel Technology, 108 (1986), 352-366 https://doi.org/10.1115/1.3264797
- A.R. Ingraffea, M.D. Grigoriu and D.V. Swenson : Representation and Probability Issues in the Simulation of Multi-Site Damage, in Structural Integrity of Aging Airplanes, Springer-Verlag, Berlin (199), 183-197
피인용 문헌
- Effects of Outside Repair Welding on the Crack Growth in the Surge Nozzle Weld on the Hot Leg Side in a Nuclear Power Plant vol.29, pp.2, 2011, https://doi.org/10.5781/KWJS.2011.29.2.034
- PWSCC Crack Growth Analysis Using Numerical Method in the Inner Surface Repair Weld of A Nozzle vol.29, pp.2, 2011, https://doi.org/10.5781/KWJS.2011.29.2.064