DOI QR코드

DOI QR Code

복합재료의 기계적 거동에 염수환경이 미치는 영향에 관한 연구

Effects of salt water environment on the mechanical behavior of composites

  • 문진범 (한국과학기술원 기계공학과 항공우주공학 대학원) ;
  • 김수현 (삼성중공업 풍력발전 사업부) ;
  • 김천곤 (한국과학기술원 기계공학과 항공우주공학)
  • 발행 : 2010.02.28

초록

본 연구에서는 염수 침수 실험과 염수 분무 실험이라는 두 가지의 실험을 위그선의 구조재료로 사용될 3가지 다른 복합재료 시스템에 대해서 해수와의 접촉에 의한 물성저하를재현하기 위해 수행하였다. 140일간 염수환경하에서 노화시킨 후 탄소섬유 복합재료와유리섬유 복합재료의 인장, 압축, 전단 강성과 강도 및 층간 전단 강도를 측정하였다. 기본 물성파의 비교를 통해서 염수환경이 복합재료의 기계적 물성에 미치는 영향이 평가되었다. 실험을 통해 염수 분무환경과 침수 환경의 차이는 거의 영향을 미치지 않음을 확인하였다. 탄소섬유 복합재료의 경우 인장 물성에 적은 손실이 발생한 반면 유리섬유 복합재료에서는 인장물성의 저하률이 탄소섬유 복합재료에 비해서 큼을 확인하였다. 그리고 모재 지배적 물성들의 큰 물성저하가 관찰되었다. 이를 통해, 염수는 복합재료의 섬유와 모재 사이의 계면을 퇴화시키고, 또한 모재 자체 물성과 유리섬유의 물성을 저하시킬 수 있음을 확인하였다.

In this paper, two different experiments, namely, salt water spray and salt water immersion, were performed to reproduce the contact of composites with the seawater for three kinds of woven fabric composite material systems which would be used for the WIG(wing in ground effect)craft. After aging 140 days in the salt water environment, material properties of carbon/epoxy and glass/epoxy composite such as tensile, compressive and shear stiffness and strength, and inter-laminar shear strength (ILSS) were measured. By comparing baseline material properties with degraded ones, the effects of the salt water environment on the composite mechanical properties were evaluated. From the experiments, it was confirmed that the difference in aging conditions had very small influence on composite properties. And it was found that tensile strength of carbon/epoxy composites showed little degradation, but much more degradation was observed in glass/epoxy composites. And large degradations on matrix dominant properties were observed. The salt water could damage the fiber-matrix interface, matrix properties and the glass fiber.

키워드

참고문헌

  1. 윤성호, "염수환경에 노출된 유리섬유직물/페놀 복합재의 내구성 평가" 한국복합재료학회지, 제 18권, 제4호, 2005, pp. 27-34.
  2. Zaki Ahmad, and B. J. Abdul Aleem, "Corrosion Behavior of a Discontinuously Reinforced Composite in Salt Water Environment," Reinforced Plastics and Composites, Vol. 25, 2006, pp. 1507-1517. https://doi.org/10.1177/0731684406066746
  3. K. Liao, C.R. Schultheisz, and D.L. Hunston, "Effects of Environmental Aging on the Properties of Pultruded GFRP," Composites, Vol. 30, 1999, pp. 485-493. https://doi.org/10.1016/S1359-8368(99)00013-X
  4. Houssam A. Toutanji, "Durability Characteristics of Concrete Columns Confined with Advanced Composite Materials," Composite Structures, Vol. 44, 1999, pp. 155-161. https://doi.org/10.1016/S0263-8223(98)00125-1
  5. Manuel A.G. Silva, "Aging of GFRP laminates and confinement of concrete columns," Composite Structures, Vol. 79, 2007, pp. 97-106. https://doi.org/10.1016/j.compstruct.2005.11.033
  6. C. Wang, Y. D. Huang, H. Y. Xv, W. B. Liu, "The durability of adhesive/carbon - carbon composites joints in salt water," International Journal of Adhesion & Adhesives, Vol. 24, 2004, pp. 471-477. https://doi.org/10.1016/j.ijadhadh.2004.01.001
  7. S. K. Rege, S. C. Lakkad, "Effect of Salt Water on Mechanical Properties of Fibre Reinforced Plastics," Fibre Science and Technology, Vol. 19, 1983, pp. 317-324. https://doi.org/10.1016/0015-0568(83)90017-9
  8. K. Komai, K. Minoshima, "Tensile and fatigue fracture behavior and water-environment effects in a SiC-whisker/ 7075-aluminum composite," Composites Science and Technology, Vol. 46, 1993, pp. 59-66. https://doi.org/10.1016/0266-3538(93)90081-Q
  9. Catherine A. Wood, Walter L. Bradley, "Determination of the effect of seawater on the interfacial strength of an interlayer E-Glass/Graphite/Epoxy composite by in situ observation of transverse cracking in an environmental SEM," Composites Science and Technology, Vol. 57, 1997, pp. 1033-1043. https://doi.org/10.1016/S0266-3538(96)00170-4
  10. Huang Gu, "Behaviours of glass fibre/unsaturated polyester composites under seawater environment", Materials and Design, Vol. 30, 2009, pp. 1337-1340. https://doi.org/10.1016/j.matdes.2008.06.020
  11. Zaki Ahmad, B. J. Abdul Aleem, "Degradation of aluminum metal matrix composites in salt water and its control," Materials and Design, Vol. 23, 2002, pp. 173-180. https://doi.org/10.1016/S0261-3069(01)00066-8
  12. A.M. Visco, L. Calabrese, P. Cianciafara, "Modification of polyester resin based composites induced by seawater absorption," Composites: Part A, Vol. 39, 2008, pp. 805-814. https://doi.org/10.1016/j.compositesa.2008.01.008
  13. Huang Gu, "Dynamic mechanical analysis of the seawater treated glass/polyester composites," Materials and Design, Vol. 30, 2009, pp. 2774-2777. https://doi.org/10.1016/j.matdes.2008.09.029
  14. Huang Gu, "Behaviours of glass fibre/unsaturated polyester composites under seawater environment," Materials and Design, Vol. 30, 2009, pp. 1337-1340. https://doi.org/10.1016/j.matdes.2008.06.020
  15. K.V. Arun, S. Basavarajappa, B.S. Sherigara, "Damage characterisation of glass/textile fabric polymer hybrid composites in sea water environment," Materials and Design. Vol. 31 2010. pp. 930-939 https://doi.org/10.1016/j.matdes.2009.07.029
  16. 허성화, 김정희, 김홍석, 권진회, 최진호, 조종래, 조윤식, "염수환경에 의한 탄소/에폭시 복합재의 물성치 변화 연구," 한국복합재료학회지, 제21권, 제3호, 2008, pp 1-8
  17. 문철진, 이청락, 권진회, 최진호, 조맹효, 김태정, "염수 환경에 노출된 고강성 탄소/에폭시 복합재의 물성치 변화 연구" 한국복합재료학회지, 제21권, 제6호2008, pp. 1-7.

피인용 문헌

  1. Effect of various hygrothermal environments on the failure of adhesively bonded composite single-lap joints vol.47, pp.17, 2013, https://doi.org/10.1177/0021998312453357