PCB 레벨 EMC 설계 기술

  • 강희도 (연세대학교 전기전자공학부) ;
  • 김현 (연세대학교 전기전자공학부) ;
  • 육종관 (연세대학교 전기전자공학부)
  • Published : 2010.01.31

Abstract

Keywords

References

  1. Universal serial bus 3.0 specification: revision 1.0, Nov. 2008.
  2. http://www.guru3d.com/news/hdmi-14-specifications-officially-presented/
  3. http://www.sata-io.org/technology/6Gbdetails.asp/
  4. T. L. Wu, Y. H. Lin, T. K. Wang, C. C. Wang, and S. T. Chen, "Electromagnetic bandgap power/ground planes for wide band suppression of ground bounce noise and radiated emission in high-speed circuits", IEEE Trans. on Microwave Theory and Technology, vol. 53, no. 9, Sep. 2005.
  5. S. S. Oh, J. M. Kim, and J. G. Yook, "Design of power plane for suppressing spurious resonances in high speed PCBs", Journal of the Korea Electromagnetic Eng. Soc., vol. 6, no. 1, Mar. 2006.
  6. J. K. Du, "An effective suppression methodology of the simultaneous switching noise in multilayer high performance printed circuit boards", Master Thesis, Yonsei University, Seoul, Korea, 2007.
  7. H. D. Kang, H. Kim, and J. G. Yook, "Wideband suppression of simultaneous switching noise with novel power plane via hole structures", Korea-Japan AP/EMC/EMT Joint Conference, May 2009.
  8. H. D. Kang, H. Kim, H. J. Lee, and J. G. Yook, "An enhanced power plane topology using localized spiral resonator for wideband suppression of simultaneous switching noise", IEEE International Symposium on Antennas and Propagation, Jun. 2009.
  9. J. H. Kwon, J. G. Yook, "Partial placement of EBG on both power and ground planes for broadband suppression of simultaneous switching noise", IEICE Trans. Commun., vol. E92-B, no. 7, pp. 2550-2553, Jul. 2009. https://doi.org/10.1587/transcom.E92.B.2550
  10. S. G. Kim, H. Kim, H. D. Kang, and J. G. Yook, "Modeling and analysis of EBG structures on power distribution network", IEEE Electrical Design and Advanced Packaging & Systems, Dec. 2009.
  11. H. D. Kang, H. Kim, S. G. Kim, and J. G. Yook, "A novel power plane topology for wideband suppression of SSN and fast computational method", IEEE Electrical Design and Advanced Packaging & Systems, Dec. 2009.