Abstract
In this paper, the strain distribution of the bond layer has been compared with the experimental data and analyzed according to the different mesh refinements and element types. The mesh density was changed along the longitudinal direction of adherend, the longitudinal direction of overlapped region, the vertical direction of adherend, the vertical direction of adhesive and the width direction of the joint. In addition, the effect of the different types of element was evaluated using soild, shell and plane strain element. The geometric nonlinear analysis was performed to consider the large deformation of the joint. From the numerical result, at least 2 elements were needed to achieve a reliable result as the solid element used. In case of shell element, the peel strain at x/c=1 showed 22.8% error compared with the experiment but the shear strain showed a good agreement with the experiment within 1.67% error.
본 연구에서는 단일겹치기 접착 체결부에 대한 유한요소해석을 통해 요소의 조밀도 및 유한요소의 종류에 따른 접착 층의 변형률 분포를 Tsai의 시험치 와 비교하여 분석하였다. 이를 위해 접합부재의 길이방향, 접착체결부의 길이방향, 접합부재의 두께방향, 접착 층의 두께방향 및 조인트의 폭방향의 요소 조밀 도를 변화시켰다. 또한, 솔리드, 쉘 및 평면 변형률 요소에 따른 효과도 분석하였다. 해석은 단일 겹치기 접착 체결부의 대변형을 고려하기 위한 기하학적 비선형 해석을 수행하였다. 이를 통해 솔리드 요소를 적용할 경우 접착부재의 길이방향으로의 요소 수는 최소 2개 이상이면 해석의 신뢰도를 확보할 수 있음을 확인할 수 있었다. 쉘 요소의 겨우 x/c=1에서 수직 변형률의 시험결과와 22.8%의 오차를 보였으나, 전단응력의 경우에는 1.67%로 시험치와 거의 일치하였다.