References
- H. S. Chen, Rep. Prog. Phys., 43(1980) 353 https://doi.org/10.1088/0034-4885/43/4/001
- Y. H. Kim, A. Inoue, T. Masumoto, "Ultrahigh tensile strengths of Al88Y2Ni9M1 (M = Mn or Fe) amorphous alloys containing finely dispersed fcc-A1 particles", Mater. Trans. JIM, 31 (1990) 747 https://doi.org/10.2320/matertrans1989.31.747
- T. Masumoto, "Materials science of amorphous materials", Ohmu, Tokoyo, 1982
- L. E. Luborsky, "Amorphous metallic alloys", Butterworths, London, 1983
- N. Matsumoto, R. Matsumoto, N. Miyazaki, "Estimation of Shear-banding resistance in metallic glass containing nanocrystalline particles", J. of non-crystalline solids, Volume 355 Page: 29
- Seong-Pil Choi, Bok-Hyun Kang, Ki-Young Kim, "Microstructural change of bulk amorphous alloys by separate cooling", Proc. 2nd Int. Conf. on Japan-Korea workshop for young foundry engineers, Jeju island, KOREA, July (2005) JFES and KFS, Page(s): 225-226
- Seong-Pil Choi, "Microstructural change of bulk amorphous alloys by separate cooling", master thesis, Korea University of Technology and Education, KOREA, 2007
- W. L. Johnson, "Bulk glass-forming metallic alloys", MRS Bulletin, 10 (1999) 47
- S. Y. Shin, J. H. Kim, D. M. Lee, J. K. Lee, H. J. Kim, H. G. Jeong, J. C. Bae, "New Cu-based bulk metallic glasses with high strength of 2000 MPa", Mat. Sci. For, 945 (2004) 449-452
- Hye-Sook Joo, "Evaluation on liquid formability of bulk amorphous ally", master thesis, Korea University of Technology and Education, KOREA, 2005
-
C. Way, P. Wadhwa, R. Busch, "The influence of shear rate and temperature on the viscosity and fragility of the
$Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10.0}Be_{22.5}$ metallic-glass-forming liquid", Acta Mater, 2977 (2007) 55 - Ki-Young Kim, "Analysis of gap formation at mold-shell interface during solidification of aluminium alloy plate", ISIJ International, 5 (2003) 647-65