DOI QR코드

DOI QR Code

Simulating a Time Reversal Process for A0 Lamb Wave Mode on a Rectangular Plate Using a Virtual Sensor Array Model

가상 탐지자 배열 모델을 이용한 직사각형 판에서 A0 램파 모드 시간반전과정 모사

  • 박현우 (동아대학교 토목공학과)
  • Received : 2010.01.12
  • Accepted : 2010.02.22
  • Published : 2010.05.20

Abstract

This paper presents the analysis of a time reversal process for $A_0$ Lamb wave mode($A_0$ mode) on a rectangular plate. The dispersion characteristic equation of the $A_0$ mode is approximated using the Timoshenko beam theory. A virtual sensor array model is developed to consider the effects of reflections occurring on the plate boundary on the time reversal process. The time reversal process is formulated in the frequency domain using the virtual sensor array model. The reconstructed signal is obtained in the time domain through an inverse fast Fourier transform. The validity of the proposed method is demonstrated through the comparison to the numerical simulation results computed by the finite element analysis.

Keywords

References

  1. Smart Material Corp., (http://www.smartmaterial. com)
  2. Raghavan, A. and Cesnik, C. E. S., 2007, "Review of Guided-wave Structural Health Monitoring," The Shock and Vibration Digest, Vol. 39, No. 91, pp. 91-114. https://doi.org/10.1177/0583102406075428
  3. Rose, J. L., 1999, "Ultrasonic Waves in Solid Media," Cambridge University Press.
  4. Giurgiutiu, V., 2005, "Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring," Journal of Intelligent Materials and Structures, Vol. 16, No. 4, pp. 291-305. https://doi.org/10.1177/1045389X05050106
  5. Su, Z. Q., Ye, L. and Lu, Y., 2006, "Guided Lamb Waves for Identification of Damage in Composite Structures: A Review," Journal of Sound and Vibration, Vol. 295, No. 3-5, pp. 753-780. https://doi.org/10.1016/j.jsv.2006.01.020
  6. Lim, K. L., Kim, E. J., Kang, J. S., Park, H. W., 2008, "Spectral Element Formulation for Analysis of Lamb Wave Propagation on a Plate Induced by Surface Bonded PZT Transducers," Transactions of the Korean Society of Noise and Vibration Engineering, Vol. 18, No. 11, pp. 1157- 1169. https://doi.org/10.5050/KSNVN.2008.18.11.1157
  7. Paget, C. A., Grondel, S., Levin, K. and Delebarre, C., 2003, "Damage Assessment in Composites by Lamb Waves and Wavelet Coefficients," Smart Materials and Structures, Vol. 12, No. 3, pp. 393-402. https://doi.org/10.1088/0964-1726/12/3/310
  8. Sohn, H., Park, G., Wait, J., Limback, N. and Farrar, C., 2004, "Wavelet-based Active Sensing for Delamination Detection in Composite Structures," Smart Materials and Structures, Vol. 13, No. 1, pp. 153-160. https://doi.org/10.1088/0964-1726/13/1/017
  9. Wilcox, P. A., 2003, "Rapid Signal Processing Technique to Remove the Effect of Dispersion from Guided Wave Signals," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control Vol. 50, No. 4, pp. 419-427. https://doi.org/10.1109/TUFFC.2003.1197965
  10. Park, H. W., Sohn, H., Law, K. H. and Farrar, C. R., 2007, "Time Reversal Active Sensing for Health Monitoring of a Composite Plate," Journal of Sound and Vibration, Vol. 302, No. 1-2, pp. 50-66. https://doi.org/10.1016/j.jsv.2006.10.044
  11. Sohn, H., Park, H. W., Law, K. H. and Farrar, C. R., 2007, "Damage Detection in Composite Plates by Using an Enhanced Time Reversal Method," Journal of Aerospace Engineering, ASCE, Vol. 20, No. 7, pp. 141-151. https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141)
  12. Sohn, H., Park, H. W., Law, K. H. and Farrar, C. R., 2007, "Combination of a Time Reversal Process and a Consecutive Outlier Analysis for Baseline-free Damage Diagnosis," Journal of Intelligent Materials and Smart Structures, Vol. 18, No. 4, pp. 335-346.
  13. Kazakov, V. V., Sutin, A. and Johnson, P. A., 2002, "Sensitive Imaging of an Elastic Nonlinear Wave-scattering Source in a Solid," Applied Physics Letters, Vol. 81, No. 4, pp. 646-648. https://doi.org/10.1063/1.1495081
  14. Park, H. W., Kim, S. B. and Sohn, H., 2009, "Understanding the Time Reversal Process of Lamb Wave Propagations," Wave Motion, Vol. 46, No. 7, pp. 451-467. https://doi.org/10.1016/j.wavemoti.2009.04.004
  15. Ing, R. K. and Fink, M., 1998, "Timereversed Lamb Waves," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 45, No. 4, pp. 1032-1043. https://doi.org/10.1109/58.710586
  16. Fung, Y. C., 1965, "Foundations of Solid Mechanics," Prentice-Hall Inc.
  17. Abaqus, 2007, User's Manual, Version 6.7, HKS Inc., Providence, Rhode Island.
  18. Doyle, J. F., 1997, "Wave Propagation in Structure: Spectral Analysis Using Fast Discrete Fourier Transforms-2nd Ed," Springer-Verlag.
  19. Kim, S. B. and Sohn, H., 2007, "Instantaneous Reference-free Crack Detection Based on Polarization Characteristics of Piezoelectric Materials," Smart Materials and Structures, Vol. 16, No. 6, pp. 2375-2387. https://doi.org/10.1088/0964-1726/16/6/042
  20. Piezo Systems, Inc.(http://www.piezo.com/)
  21. Raghavan, A. and Cesnik, C. E. S., 2005, "Finite-dimensional Piezoelectric Transducer Modeling for Guided Wave Based Structural Health Monitoring," Smart Materials Structures, Vol. 14, No. 6, pp. 1448-1461. https://doi.org/10.1088/0964-1726/14/6/037
  22. KISTI Supercomputer Center(http://www.ksc.re.kr/eng/resources/resources1.htm)
  23. Lee, S. J. and Sohn, H., 2006, "Active Self-sensing Scheme Development for Structural Health Monitoring," Smart Materials and Structures, Vol. 15, No. 6, pp. 1734-1746. https://doi.org/10.1088/0964-1726/15/6/028