References
- B. Hadimioglu, E.G. Rawson, R. Lujan, M. Lim, J . C. Zesch,1993, High efficiency Fresnel acoustic lensHIGH-EFFICIENCY FRESNEL ACOUSTIC LENSES
- C. Sierra and A. J. Vazquez, 2005, High solar energy concentration with a Fresnel lens, Journal of materials science 40, pp.1339-1343 https://doi.org/10.1007/s10853-005-0562-6
- W. Watanabe, D. Kuroda and K. Itoh, 2002, Fabrication of Fresnel zone plate embedded in silica glass by femtosecond laser pulse, Optics Express, Vol. 10, No. 19pp.978-983 https://doi.org/10.1364/OE.10.000978
- Y Kim, Y Choi, S Kang, 2005, Replication of high density optical disc using injection mold with MEMS heater, Microsystem Technologies, Vol.11, pp.464-469 https://doi.org/10.1007/s00542-005-0596-3
- H. Schift, C. David, M. Gabriel, J. Gobrecht, L. j. Heyderman, el al, 2000, "Nanoreplication in Polymers Using Hot Embossing and Injection Molding", Microlectronic Engineering, Vol 53, pp. 171-174. https://doi.org/10.1016/S0167-9317(00)00289-6
- Masaki Yoshii and Hiroki Kuramoto, 1994, "Experimental Study of Transcription of Minute Width Grooves in Injection Molding", Polymer Engineering and Science, Vol. 34, pp. 1211-1217. https://doi.org/10.1002/pen.760341507
- S. Kim, H. Kim and S. Kang, 2006 "Development of a UV-imprinting Process for Integrating a Microlens Array on an Image Sensor", Opt. Lett. 31, 2710-2712. https://doi.org/10.1364/OL.31.002710
- M.V. Kunnavakkam, F.M. Houlihan, M. Schlax, J.A. Liddle, P. Kolodner, et al, 2003 "Low-cost, low-loss microlens arrays fabricated by soft-lithography replication process", Appl. Phys. Lett. 82, 1152-1154. https://doi.org/10.1063/1.1555694
- P. Nussbaum, I. Philipoussis, A. Husser, and H.P. Herzig, 1998 "Simple technique for replication of micro-optical elements", Opt. Eng. 37, 1804-1808. https://doi.org/10.1117/1.601799
- M.T. Gale, C. Gimkiewicz, S. Obi, M. Schnieper, J. Sochtig, H. Thiele, et al, 2005, "Replication Technology for Optical Microsystems", Opt. Laser. Eng. 43, 373-386. https://doi.org/10.1016/j.optlaseng.2004.02.007
- J. Lim, K. Jeong, J. Yoo, N. Park and S. Kang , 2005, Design and fabrication of diffractive optical element for objective lens of small form factor optical data storage deviced, Information Storage and Processing Systems Conference.