Earthquakes and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Numerical simulation of tested reinforced concrete beams strengthened by thin fibre-reinforced cementitious matrix jackets

  • Georgiadi-Stefanidi, K. (Department of Civil Engineering, University of Thessaly) ;
  • Mistakidis, E. (Department of Civil Engineering, University of Thessaly) ;
  • Perdikaris, P. (Department of Civil Engineering, University of Thessaly) ;
  • Papatheocharis, T. (Department of Civil Engineering, University of Thessaly)
  • Received : 2010.03.14
  • Accepted : 2010.08.31
  • Published : 2010.12.25
⟨ Previous Next ⟩

Abstract

The paper presents a study on the numerical simulation of the behaviour of conventional reinforced concrete (RC) beams strengthened by thin fibre-reinforced cementitious matrix (FRCM) jackets. The study covers the cases of retrofitting RC beams with or without stirrups with jackets reinforced with longitudinal and transverse steel reinforcement or with light wire mesh. The strengthened RC beams to be modelled were tested under static monotonic and fully reversing cyclic loading. The numerical results show that the numerical model used predicted quite well the experimental results.

Keywords

References

  1. Adhikary, B.B. and Mutsuyoshi, H. (2006), "Shear strengthening of RC beams with web-bonded continuous steel plates", Constr. Build. Mater., 20(5), 296-307. https://doi.org/10.1016/j.conbuildmat.2005.01.026
  2. Ashour, S.A. and Wafa, F.F. (1993), "Flexural behavior of high-strength fiber reinforced concrete beams", ACI Struct. J., 90(3), 279-287.
  3. Balaguru, P., Narahari, R. and Patel, M. (1992), "Flexural toughness of steel fiber reinforced concrete", ACI Mater. J., 89(6), 541-546.
  4. Banthia, N. and Trottier, J.F. (1995), "Concrete reinforced with deformed steel fibers Part II: Toughness Characterization", ACI Mater. J., 92(2), 146-154.
  5. Bazant, Z. and Planas, J. (1998) Fracture and size effects in concrete and other quasibrittle materials, CRC Press, Florida.
  6. Bentur, A. and Mindess, S. (1983), "Concrete beams reinforced with conventional steel bars and steel fibres: properties in static loading", Int. J. Cement Compos. Lightweight Concrete, 5(3), 199-202. https://doi.org/10.1016/0262-5075(83)90007-6
  7. Chunxiang, Q. and Patnaikuni, I. (1999), "Properties of high-strength steel fiber-reinforced concrete beams in bending", Cement Concrete Comp., 21(1), 73-81.
  8. Daniel, L. and Loukili, A. (2002), "Behavior of high-strength fiber-reinforced concrete beams under cyclic loading", ACI Struct. J., 99(3), 248-256.
  9. deBorst, R., Remmers, J., Needleman, A. and Abellan, M.A. (2004), "Discrete vs smeared crack models for concrete fracture: bridging the gap", Int. J. Numer. Anal. Method. Geomech., 28(7-8), 583-607. https://doi.org/10.1002/nag.374
  10. Dogan, E. and Krstulovic-Opara, N. (2003), "Seismic retrofit with continuous slurry-infiltrated mat concrete jackets", ACI Struct. J., 100(6), 713-722.
  11. Doran, B., Koksal, H. O. and Turgay, T. (2009), "Nonlinear finite element modelling of rectangular/square concrete columns confined with FRP", Mater. Design, 30(8), 3066-3075. https://doi.org/10.1016/j.matdes.2008.12.007
  12. Georgiadi-Stefanidi, K., Mistakidis, E., Pantousa, D. and Zygomalas, M. (2010), "Numerical modelling of the pull-out of hooked steel fibres from high-strength cementitious matrix, supplemented by experimental results", Constr. Build. Mater. (accepted) https://doi.org/10.1016/j.conbuildmat.2010.06.007
  13. Haddad, R.H., Shannag, M.J. and Hamad, R.J. (2007), "Repair of heat-damaged reinforced concrete T-beams using FRCM jackets", Mag. Concrete Res., 59(3), 223-231. https://doi.org/10.1680/macr.2007.59.3.223
  14. Khalifa, A. and Nanni, A. (2002), "Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites", Constr. Build. Mater., 16(3), 135-146. https://doi.org/10.1016/S0950-0618(02)00002-8
  15. Krstulovic-Opara, N. and Al-Shannag, M.J. (1999), "Slurry infiltrated mat concrete (SIMCON)-based shear retrofit of reinforced concrete members", ACI Struct. J., 96(1), 105-114.
  16. Li, J., Gong, J. and Wang, L. (2009), "Seismic behaviour of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel jacket", Constr. Build. Mater., 23(7), 2653-2663. https://doi.org/10.1016/j.conbuildmat.2009.01.003
  17. Li, V.C. (2003), "On engineered cementitious composites (ECC). A review of the material and its applications", J. Adv. Concrete Technol., 1(3), 215-230. https://doi.org/10.3151/jact.1.215
  18. Naaman, A.E. and Reinhardt, H.W. (1996), "Characterization of high performance fiber reinforced cement composites-HPFRCMC", In: Naaman AE, Reinhardt HW, editors. High Performance Fiber Reinforced Cement Composites 2 (HPFRCMC 2), Proceedings of the Second International RILEM Workshop, E&FN Spon, London, 1-24.
  19. Naaman, A.E., Reinhardt, H.W. and Fritz, C. (1993), "Reinforced concrete beams with SIFCON matrix", ACI Struct. J., 89(1), 1-15.
  20. Oluokun, A.F. and Haghayeghi, A.R. (1998), "Flexural behavior of reinforced concrete beams retrofitted or repaired with slurry infiltrated mat concrete", ACI Struct. J., 95(6), 654-664.
  21. Padmarajaiah, S.K. and Ramaswamy, A. (2002), "A finite element assessment of flexural strength of prestressed concrete beams with fibre reinforcement", Cement Concrete Comp., 24(2), 229-241. https://doi.org/10.1016/S0958-9465(01)00040-3
  22. Papanikolaou, V.K. and Kappos, A.J. (2007), "Confinement-sensitive plasticity constitutive model for concrete in triaxial compression", Int. J. Solids Struct., 44(21), 7021-7048. https://doi.org/10.1016/j.ijsolstr.2007.03.022
  23. Papatheocharis, T.T. and Perdikaris, P.C. (2009), "Experimental study of the behavior of conventional RC beams reinforced with fiber-reinforced-cement jackets", 16th National Greek Conference of Concrete Structures, Pafos, Cyprus, October. (in Greek)
  24. Paramasivam, P., Lim, C.T. and Ong, K.C. (1998), "Strengthening of RC beams with ferrocement laminates", Cement Concrete Comp., 20(1), 53-65. https://doi.org/10.1016/S0958-9465(97)00068-1
  25. Rodriguez, M. and Park, R. (1994), "Seismic load tests on reinforced concrete columns strengthened by jacketing", ACI Struct. J., 91(2), 150-159.
  26. Shannag, M.J. and Alhassan, M.A. (2005), "Seismic upgrade of interior beam-column subassemblages with high-performance fiber-reinforced concrete jackets", ACI Struct. J., 102(1), 131-138.
  27. Triantafillou, T.C. and Papanicolaou, C.G. (2006), "Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets", Mater. Struct., 39(1), 93-103.
  28. Vandoros, K.G. and Dritsos, S.E. (2006), "Concrete jacket construction detail effectiveness when strengthening RC columns", Constr. Build. Mater., 22(3), 264-276.

Cited by

  1. Numerical modelling of the pull-out response of inclined hooked steel fibres vol.3, pp.2, 2015, https://doi.org/10.12989/acc.2015.3.2.127
  2. Repair of Heavily Damaged RC Beams Failing in Shear Using U-Shaped Mortar Jackets vol.9, pp.6, 2019, https://doi.org/10.3390/buildings9060146