Earthquakes and Structures

  • 제1권3호
  • /
  • Pages.289-306
  • /
  • 2010
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An evolutionary algorithm for optimal damper placement to minimize interstorey-drift transfer function in shear building

  • Fujita, Kohei (Department of Urban and Environmental Engineering, Kyoto University) ;
  • Yamamoto, Kaoru (Department of Urban and Environmental Engineering, Kyoto University) ;
  • Takewaki, Izuru (Department of Urban and Environmental Engineering, Kyoto University)
  • 투고 : 2010.05.03
  • 심사 : 2010.07.08
  • 발행 : 2010.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

A gradient-based evolutionary optimization methodology is presented for finding the optimal design of viscous dampers to minimize an objective function defined for a linear multi-storey structure. The maximum value along height of the transfer function amplitudes for the interstorey drifts is taken as the objective function. Since the ground motion includes various uncertainties, the optimal damper placement may be different depending on the ground motion used for design. Furthermore, the transfer function treated as the objective function depends on the properties of structural parameters and added dampers. This implies that a more robust damper design is desired. A reliable and robust damping design system against any unpredictable ground motions can be provided by minimizing the maximum transfer function. Such design system is proposed in this paper.

키워드

과제정보

연구 과제 주관 기관 : Japan Society for the Promotion of Science

참고문헌

  1. Attard, T.L. (2007), "Controlling all interstory displacements in highly nonlinear steel buildings using optimal viscous damping", J. Struct. Eng. - ASCE, 133(9), 1331-1340. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1331)
  2. Aydin, E., Boduroglub, M.H. and Guney, D. (2007), "Optimal damper distribution for seismic rehabilitation of planar building structures", Eng. Struct. 29, 176-185. https://doi.org/10.1016/j.engstruct.2006.04.016
  3. Bai, Y., Grigoriadis, K.M. and Demetriou, M.A. (2006), "Damping parameter design in structural systems using an analytical $H_{\infty}$ norm bound approach", Proc. of the 45th IEEE conf. on Decision & Control, San Diego, CA.
  4. Cimellaro, G.P. (2007), "Simultaneous stiffness-damping optimization of structures with respect to acceleration, displacement and base shear", Eng. Struct., 29, 2853-2870. https://doi.org/10.1016/j.engstruct.2007.01.001
  5. Cimellaro, G.P., and Retamales, R. (2007). "Optimal softening and damping design for buildings", Struct. Control Health Monitor., 14(6), 831-857. https://doi.org/10.1002/stc.181
  6. Constantinou, M.C. and Tadjbakhsh, I.G. (1983), "Optimum design of a first story damping system", Comput. Struct. 17(2), 305-310. https://doi.org/10.1016/0045-7949(83)90019-6
  7. De Silva, C.W. (1981), "An algorithm for the optimal design of passive vibration controllers for flexible systems", J. Sound Vib. 74(4), 495-502.
  8. Fujita, K., Moustafa A. and Takewaki, I. (2010), "Optimal placement of viscoelastic dampers and supporting members under variable critical excitations", Earthq. Struct., 1(1), 43-67. https://doi.org/10.12989/eas.2010.1.1.043
  9. Garcia, D.L. (2001), "A simple method for the design of optimal damper configurations in MDOF structures", Earthq. Spectra, 17(3), 387-398. https://doi.org/10.1193/1.1586180
  10. Garcia, D.L. and Soong, T.T. (2002), "Efficiency of a simple approach to damper allocation in MDOF structures", J. Struct. Control, 9(1), 19-30. https://doi.org/10.1002/stc.3
  11. Gurgoze, M. and Muller, P.C. (1992), "Optimal positioning of dampers in multi-body systems", J. Sound Vib. 158(3), 517-530. https://doi.org/10.1016/0022-460X(92)90422-T
  12. Hahn, G.D. and Sathiavageeswaran, K.R. (1992), "Effects of added-damper distribution on the seismic response of buildings", Comput. Struct. 43(5), 941-950. https://doi.org/10.1016/0045-7949(92)90308-M
  13. Kiu, W., Tong, M., Wu, Y. and Lee, G. (2004), "Optimized damping device configuration design of a steel frame structure based on building performance indices", Earthq. Spectra, 20(1), 67-89. https://doi.org/10.1193/1.1648334
  14. Lavan, O. and Levy, R. (2005), "Optimal design of supplemental viscous dampers for irregular shear-frames in the presence of yielding", Earthq. Eng. Struct. Dyn., 34(8), 889-907. https://doi.org/10.1002/eqe.458
  15. Lavan, O. and Levy, R. (2006a), "Optimal design of supplemental viscous dampers for linear framed structures", Earthq. Eng. Struct. Dyn., 35(3), 337-356. https://doi.org/10.1002/eqe.524
  16. Lavan, O. and Levy, R. (2006b), "Optimal peripheral drift control of 3D irregular framed structures using supplemental viscous dampers", J. Earthq. Eng., 10(6), 903-923.
  17. Levy, R. and Lavan O. (2006), "Fully stressed design of passive controllers in framed structures for seismic loadings", Struct. Multidiscip. O., 32(6), 485-498. https://doi.org/10.1007/s00158-005-0558-5
  18. Liu, W., Tong, M., Wu, X. and Lee, G. (2003), "Object-oriented modeling of structural analysis and design with application to damping device configuration", J. Comput. Civil Eng. - ASCE, 17(2), 113-122. https://doi.org/10.1061/(ASCE)0887-3801(2003)17:2(113)
  19. Liu, W., Tong, M. and Lee, G. (2005), "Optimization methodology for damper configuration based on building performance indices", J. Struct. Eng. - ASCE, 131(11), 1746-1756. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1746)
  20. Marano, G..C., Trentadue, F. and Greco, R. (2007), "Stochastic optimum design criterion for linear damper devices for seismic protection of building", Struct. Multidiscip. O., 33, 441-455. https://doi.org/10.1007/s00158-006-0023-0
  21. Silvestri, S. and Trombetti, T. (2007), "Physical and numerical approaches for the optimal insertion of seismic viscous dampers in shear-type structures", J. Earthq. Eng., 11(5), 787-828. https://doi.org/10.1080/13632460601034155
  22. Singh, M.P. and Moreschi, L.M. (2001), "Optimal seismic response control with dampers", Earthq. Eng. Struct. Dyn., 30(4), 553-572. https://doi.org/10.1002/eqe.23
  23. Singh, M.P. and Moreschi, L.M. (2002), "Optimal placement of dampers for passive response control", Earthq. Eng. Struct. Dyn., 31(4), 955-976. https://doi.org/10.1002/eqe.132
  24. Takewaki, I. (1997), "Optimal damper placement for minimum transfer functions", Earthq. Eng. Struct. Dyn., 26(11), 1113-1124. https://doi.org/10.1002/(SICI)1096-9845(199711)26:11<1113::AID-EQE696>3.0.CO;2-X
  25. Takewaki, I. (2000), "Optimal damper placement for planar building frames using transfer functions", Struct. Multidiscip. O., 20(4), 280-287. https://doi.org/10.1007/s001580050158
  26. Takewaki, I. (2002), "Robust building stiffness design for variable critical excitations", J. Struct. Eng. - ASCE, 128(12), 1565-1574. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1565)
  27. Takewaki, I. (2009), Building control with passive dampers: optimal performance-based design for earthquakes, John Wiley & Sons (Asia), Singapore.
  28. Takewaki, I. and Yoshitomi, S. (1998), "Effects of support stiffnesses on optimal damper placement for a planar building frame", J. Struct. Des. Tall Build., 7(4), 323-336. https://doi.org/10.1002/(SICI)1099-1794(199812)7:4<323::AID-TAL115>3.0.CO;2-L
  29. Takewaki, I., Yoshitomi, S., Uetani, K. and Tsuji, M. (1999), "Non-monotonic optimal damper placement via steepest direction search", Earthq. Eng. Struct. Dyn., 28(6), 655-670. https://doi.org/10.1002/(SICI)1096-9845(199906)28:6<655::AID-EQE833>3.0.CO;2-T
  30. Tan, P., Dyke, SJ., Richardson, A. and Abdullah, M. (2005), "Integrated device placement and control design in civil structures using genetic algorithms", J. Struct. Eng. - ASCE, 131(10), 1489-1496. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1489)
  31. Trombetti T. and Silvestri, S. (2004), "Added viscous dampers in shear-type structures: the effectiveness of mass proportional damping", J. Earthq. Eng., 8(2), 275-313.
  32. Trombetti, T. and Silvestri, S. (2007), "Novel schemes for inserting seismic dampers in shear-type systems based upon the mass proportional component of the Rayleigh damping matrix", J. Sound Vib., 302(3), 486-526. https://doi.org/10.1016/j.jsv.2006.11.030
  33. Tsuji, M. and Nakamura, T. (1996), "Optimum viscous dampers for stiffness design of shear buildings", J. Struct. Des. Tall Build., 5, 217-234. https://doi.org/10.1002/(SICI)1099-1794(199609)5:3<217::AID-TAL70>3.0.CO;2-R
  34. Uetani, K., Tsuji, M. and Takewaki, I. (2003), "Application of optimum design method to practical building frames with viscous dampers and hysteretic dampers", Eng. Struct., 25(5), 579-592. https://doi.org/10.1016/S0141-0296(02)00168-2
  35. Viola, E. and Guidi, F. (2008), "Influence of the supporting braces on the dynamic control of buildings with added viscous dampers", Struct. Control Health Monitor., 16(3), 267-286.
  36. Wang, Y. and Dyke, S. (2008), "Smart system design for a 3D base-isolated benchmark building", Struct. Control Health Monitor., 30, 939-957.
  37. Wongprasert, N. and Symans, M.D. (2004), "Application of a genetic algorithm for optimal damper distribution within the nonlinear seismic benchmark building", J. Struct. Eng. - ASCE, 130(4), 401-406.
  38. Yamamoto, K., Fujita, K. and Takewaki, I. (2010), "$H_{\infty}$ optimization in damper placement for interstorey drift control of structures", Proc. of Advances in Interaction and Multiscale Mechanics (AIMM'10), Jeju, Korea.

피인용 문헌

  1. A simple damper optimization algorithm for both target added damping ratio and interstorey drift ratio vol.5, pp.1, 2013, https://doi.org/10.12989/eas.2013.5.1.083
  2. Seismic behavior of viscously damped yielding frames under structural and damping uncertainties vol.11, pp.6, 2013, https://doi.org/10.1007/s10518-013-9479-7
  3. Optimal distribution of friction dampers for seismic retrofit of a reinforced concrete moment frame vol.20, pp.10, 2017, https://doi.org/10.1177/1369433216683197
  4. Using an artificial bee colony algorithm for the optimal placement of viscous dampers in planar building frames vol.48, pp.2, 2013, https://doi.org/10.1007/s00158-013-0892-y
  5. Beyond Uncertainties in Earthquake Structural Engineering vol.1, 2015, https://doi.org/10.3389/fbuil.2015.00001
  6. Seismic design of a precast r.c. structure equipped with viscous dampers vol.2, pp.3, 2011, https://doi.org/10.12989/eas.2011.2.3.297
  7. Robust passive damper design for building structures under uncertain structural parameter environments vol.3, pp.6, 2012, https://doi.org/10.12989/eas.2012.3.6.805
  8. Telescopic columns as a new base isolation system for vibration control of high-rise buildings vol.3, pp.6, 2010, https://doi.org/10.12989/eas.2012.3.6.853
  9. A retrofitting method for torsionally sensitive buildings using evolutionary algorithms vol.12, pp.3, 2017, https://doi.org/10.12989/eas.2017.12.3.309
  10. Optimal distribution of steel plate slit dampers for seismic retrofit of structures vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.473
  11. Distributed Passive Actuation Schemes for Seismic Protection of Multibuilding Systems vol.10, pp.7, 2010, https://doi.org/10.3390/app10072383
  12. Synthesis of passive interconnections in mass chains achieving a scale-free performance vol.235, pp.9, 2010, https://doi.org/10.1177/09596518211004303