DOI QR코드

DOI QR Code

Performance-based seismic design of reinforced concrete ductile buildings subjected to large energy demands

  • 투고 : 2009.10.17
  • 심사 : 2010.02.19
  • 발행 : 2010.03.25

초록

Current seismic design codes do not contemplate explicitly some variables that are relevant for the design of structures subjected to ground motions exhibiting large energy content. Particularly, the lack of explicit consideration of the cumulative plastic demands and of the degradation of the hysteretic cycle may result in a significant underestimation of the lateral strength of reinforced concrete structures built on soft soils. This paper introduces and illustrates the use of a numerical performance-based methodology for the predesign of standard-occupation reinforced concrete ductile structures. The methodology takes into account two limit states, the performance of the non-structural system, and in the case of the life safety limit state, the effect of cumulative plastic demands and of the degradation of the hysteretic cycle on the assessment of structural performance.

키워드

참고문헌

  1. Applied Technology Council (1998), "FEMA 306. Evaluation of earthquake damaged concrete and masonry wall buildings", ATC-43 Project.
  2. Ascheim, M (2005), http://nisee.berkeley.edu/software/drain2dx
  3. Arroyo, D. and Ordaz, M. (2007), "Hysteretic energy demands for SDOF systems subjected to narrow band earthquake ground motions. Applications to the Lake Bed Zone of Mexico City", J. Earthq. Eng., 11, 147-165. https://doi.org/10.1080/13632460601123131
  4. Bertero, R.D., and Bertero, V.V. (1992), "Tall reinforced concrete buildings: conceptual earthquake-resistant design methodology", Report UCB/EERC-92/16, University of California at Berkeley.
  5. Bertero, V.V. (1997), "Performance-based seismic engineering: A critical review of proposed guidelines", Proceedings of the International Workshop on Seismic Design Methodologies for the Next Generation of Codes, Rotterdam.
  6. Bojorquez, E. and Ruiz, S.E. (2004), "Strength reduction factors for the valley of Mexico taking into account low cycle fatigue effects", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, August.
  7. Cosenza, E., Manfredi, G. and Ramasco, R. (1993), "The use of damage functionals in earthquake engineering: a comparison between different methods", Earthq. Eng. Struct. D., 22, 855-868. https://doi.org/10.1002/eqe.4290221003
  8. Fajfar, P. (1992), "Equivalent ductility factors taking into account low-cycle fatigue", Earthq. Eng. Struct. D., 21, 837-848. https://doi.org/10.1002/eqe.4290211001
  9. Federal Emergency Management Agency (1997), "FEMA 273, NEHRP guidelines for the seismic rehabilitation of buildings".
  10. Huerta-Garnica, B. and Reinoso-Angulo, E. (2002), "Espectros de energía de movimientos fuertes registrados en Mexico", Revista de Ingeniería Sísmica, 66, 45-72.
  11. Kunnath, S.K., Reinhorn, A.M. and Park, Y.J. (1990), "Analytical modeling of inelastic seismic response of R/C structures", J. Struct. Eng-ASCE, 116(4), 996-1017. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(996)
  12. Mahin, S.A. and Bertero, V.V. (1981), "An evaluation of inelastic seismic design spectra", J. Struct. Eng-ASCE, 107(9), 1777-1795.
  13. Miranda, E. (1991), Seismic evaluation and upgrading of existing buildings, Doctoral Thesis, University of California at Berkeley.
  14. Miranda, E. and Ruiz-Garcia, J. (2002), "Influence of stiffness degradation on strength demands of structures built on soft soil sites", Eng. Struct., 24(10), 1271-1281. https://doi.org/10.1016/S0141-0296(02)00052-4
  15. Panagiotakos, T.B. and Fardis, M.N. (2001), "Deformations of reinforced concrete members at yielding and ultimate", ACI Struct. J., 98(2), 135-148.
  16. Pantazopoulou, S.J. and French, C.W. (2001), "Slab participation in practical earthquake design of reinforced concrete frames", ACI Struct. J., 98(4), 479-489.
  17. Park, Y.J. and Ang, A.H (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng-ASCE, 111(4), 740-757. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(740)
  18. Prakash, V.G., Powell, H. and Campbell, S. (1993), "DRAIN-2DX Base program description and user guide", Report UCB/SEMM-93/17, University of California at Berkeley.
  19. Priestley, M.J.N. (2000), "Performance based seismic design", Proceedings of the 12th World Conference on Earthquake Engineering, New Zealand, January.
  20. Qi, X. and Moehle, J.P. (1991), "Displacement design approach for reinforced concrete structures subjected to earthquakes", Report UCB/EERC-91/02, University of California at Berkeley.
  21. Reyes Salinas, C. (2000), El estado limite de servicio en el diseño sismico de edificios, Doctoral Thesis, Universidad Nacional Autonoma de Mexico.
  22. Rodriguez, M.E. and Botero, J.C. (1997), "Evaluación del comportamiento de barras de acero de refuerzo sometidas a cargas monotonicas y ciclicas reversibles incluyendo pandeo", Revista de Ingeniería Sísmica, 56, 9-27.
  23. Rodriguez, M.E. and Aristizabal, J.C. (1999), "Evaluation of a seismic damage parameter", Earthq. Eng. Struct. D., 28, 463-477. https://doi.org/10.1002/(SICI)1096-9845(199905)28:5<463::AID-EQE818>3.0.CO;2-V
  24. SEAOC (1995), "Performance based seismic engineering of buildings", Vision 2000 Committee.
  25. Seed, H.B. and Sun, J.I. (1989), "Implications of site effects in the Mexico City Earthquake of Sept.19, 1985 for earthquake-resistant design criteria in the San Francisco Bay Area of California", Report No.UCB/EERC-89/03, University of California at Berkeley.
  26. Silva-Olivera, H. and Lopez-Batiz, O. (2001), "Estudio experimental sobre índices de dano en estructuras de concreto reforzado sujetas a cargas laterales", Proceedings of the 13th Mexican Conference on Earthquake Engineering, Guadalajara, October.
  27. Teran-Gilmore, A. and Bertero, V.V. (1993), "Seismic performance of a 30-story building located on soft soil and designed according to UBC 1991", Report No. UCB/EERC-93/04, University of California at Berkeley.
  28. Teran-Gilmore, A. (1996), Performance-based earthquake-resistant desing of framed buildings using energy concepts, Doctoral Thesis, University of California at Berkeley.
  29. Teran-Gilmore, A. (1998), "Caracteristicas mecanicas y desempeño sismico de marcos ductiles de concreto reforzado", Proceedings of the 11th Mexican Conference on Structural Engineering.
  30. Teran-Gilmore, A. (2004), "On the use of spectra to establish damage control in regular frames during global predesign", Earthq. Spectra, 20(3), 1-26. https://doi.org/10.1193/1.1647579
  31. Teran-Gilmore, A. and Jirsa, J.O. (2005), "A Damage Model for Practical Seismic Design that Accounts for Low Cycle Fatigue", Earthq. Spectra, 21(3), 803-832. https://doi.org/10.1193/1.1979500
  32. Teran-Gilmore, A. and Bahena-Arredondo, N. (2008), "Cumulative ductility spectra for seismic design of ductile structures subjected to long duration motions: concept and theoretical background", J. Earthq. Eng., 12(1), 152-172. https://doi.org/10.1080/13632460701364486
  33. Williams, M.S. and Sexsmith, R.G. (1997), "Seismic assessment of concrete bridges using inelastic damage analysis", Eng. Struct., 19(3), 208-216. https://doi.org/10.1016/S0141-0296(96)00104-6

피인용 문헌

  1. Response transformation factors for deterministic-based and reliability-based seismic design vol.46, pp.6, 2013, https://doi.org/10.12989/sem.2013.46.6.755
  2. Prediction of hysteretic energy demands in steel frames using vector-valued IMs vol.19, pp.3, 2015, https://doi.org/10.12989/scs.2015.19.3.697
  3. Effect of seismic sequences in reinforced concrete frame buildings located in soft-soil sites vol.63, 2014, https://doi.org/10.1016/j.soildyn.2014.03.008
  4. The need for upgrading the seismic performance objectives vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.401
  5. A new damage index for reinforced concrete structures vol.6, pp.6, 2014, https://doi.org/10.12989/eas.2014.6.6.581
  6. Evaluation of Performance Levels of RC Frames Using Plastic Energy Demand and Interstory Drift Ratio Concepts vol.18, pp.10, 2015, https://doi.org/10.1260/1369-4332.18.10.1747
  7. Evaluation of the economic benefits of using Buckling-Restrained Braces in hospital structures located in very soft soils vol.136, 2017, https://doi.org/10.1016/j.engstruct.2017.01.038
  8. Comparative reliability of two 24-story braced buildings: traditional versus innovative vol.22, pp.8, 2013, https://doi.org/10.1002/tal.716
  9. Response to seismic sequences of short-period structures equipped with Buckling-Restrained Braces located on the lakebed zone of Mexico City vol.137, 2017, https://doi.org/10.1016/j.jcsr.2017.06.010
  10. Proposed Input Energy-Based Damage Index for RC Bridge Piers vol.24, pp.1, 2019, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001326
  11. On the Use of Vector-Valued Intensity Measure to Predict Peak and Cumulative Demands of Steel Frames under Narrow-Band Motions vol.595, pp.None, 2014, https://doi.org/10.4028/www.scientific.net/amm.595.137
  12. A simplified normalized cumulative hysteretic energy spectrum vol.12, pp.2, 2010, https://doi.org/10.12989/eas.2017.12.1.177
  13. Multidimensional Fragility Analysis for a NEES Frame Structure by Integrating a New Energy Damage Index: Cumulative Plastic Strain vol.2019, pp.None, 2010, https://doi.org/10.1155/2019/7323656
  14. Analysis on damage of RC frames retrofitted with buckling-restrained braces based on estimation of damage index vol.70, pp.6, 2010, https://doi.org/10.12989/sem.2019.70.6.781
  15. Derivation of yield force coefficient for RC frames considering energy balance and P-delta effects vol.79, pp.4, 2010, https://doi.org/10.12989/sem.2021.79.4.429
  16. Improvement of energy damage index bounds for circular reinforced concrete bridge piers under dynamic analysis vol.22, pp.6, 2010, https://doi.org/10.1002/suco.202000762