DOI QR코드

DOI QR Code

2D evaluation of crack openings using smeared and embedded crack models

  • 투고 : 2009.09.18
  • 심사 : 2010.06.23
  • 발행 : 2010.12.25

초록

This work deals with the determination of crack openings in 2D reinforced concrete structures using the Finite Element Method with a smeared rotating crack model or an embedded crack model. In the smeared crack model, the strong discontinuity associated with the crack is spread throughout the finite element. As is well known, the continuity of the displacement field assumed for these models is incompatible with the actual discontinuity. However, this type of model has been used extensively due to the relative computational simplicity it provides by treating cracks in a continuum framework, as well as the reportedly good predictions of reinforced concrete members' structural behavior. On the other hand, by enriching the displacement field within each finite element crossed by the crack path, the embedded crack model is able to describe the effects of actual discontinuities (cracks). This paper presents a comparative study of the abilities of these 2D models in predicting the mechanical behavior of reinforced concrete structures. Structural responses are compared with experimental results from the literature, including crack patterns, crack openings and rebar stresses predicted by both models.

키워드

참고문헌

  1. Bresler, B. and Scordelis, A.C. (1963), "Shear strength of reinforced concrete beams", J. Am. Concrete Inst., 60(1), 51-74.
  2. Cervera, M., Oliver, J. and Manzoli, O.L. (1996), "A rate-dependent isotropic damage model for the seismic analysis of concrete dams", Earthq. Eng. Struct. D., 25(9), 987-1010. https://doi.org/10.1002/(SICI)1096-9845(199609)25:9<987::AID-EQE599>3.0.CO;2-X
  3. Gamino, A.L., Bittencourt, T.N. and Sousa, J.L.A.O. (2009), "Finite element computational modeling of externally bonded CFRP composites flexural behavior in RC beams", Comput. Concrete, 6(3), 187-202. https://doi.org/10.12989/cac.2009.6.3.187
  4. Gamino, A.L., Bittencourt, T.N. and Sousa, J.L.A.O. (2007), "Numerical modeling of classic concrete beam tests", IBRACON Struct. J., 3(2), 201-229. (Available from http://www.ibracon.org.br/publicacoes/revistas_ibracon/ rev_estruturas/)
  5. Gamino, A.L. (2007), Physical and computational modeling of RC structures strengthened with FRP, PhD Thesis, Escola Politécnica, Universidade de Sao Paulo, Sao Paulo. (in Portuguese)
  6. Gamino, A.L. and Bittencourt, T.N. (2007), "Numerical evaluation of plastic rotation capacity in reinforced-concrete beams", 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures - FraMCoS 6, Catania, 2, 665-670.
  7. Jacomassi, L.M.C., Gamino, A.L. and Barbosa, M.P. (2009), "Numerical simulation of the behavior of reinforced concrete beams by FEM using CASTEM 2000 Program", Rev. Int. Met. Num. Calc. Dis. Ing., 25(2), 133-144.
  8. Jirasek, M. and Zimmermann, T. (1998), "Analysis of rotating crack model", J. Eng. Mech. - ASCE, 124(8), 842-851. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(842)
  9. Jirasek, M. (2000), "Comparative study on finite elements with embedded cracks", Comput. Method. Appl. M., 188, 307-330. https://doi.org/10.1016/S0045-7825(99)00154-1
  10. Lorrain, M.S., Barbosa, M.P., Arnaud, M. and Gamino, A.L. (2007), "High strength concrete: the reinforced concrete of the century 21st?", Rev. Int. Met. Num. Calc. Dis. Ing., 23(3), 251-264.
  11. Manzoli, O.L., Oliver, J., Huespe, A.E. and Diaz, G. (2008), "A mixture theory based method for three dimensional modeling of reinforced concrete members with embedded crack finite elements", Comput. Concrete, 5(4), 401-416. https://doi.org/10.12989/cac.2008.5.4.401
  12. Manzoli, O.L. and Shing, P.B. (2006), "A general technique to embed non-uniform discontinuities into standard solid finite elements", Comput. Struct., 84(10-11), 742-757. https://doi.org/10.1016/j.compstruc.2005.10.009
  13. Ngo, D. and Scordelis, A.C. (1967), "Finite element analysis of reinforced concrete beams", ACI J., 64(3), 152-163.
  14. Oliver, J., Linero, D., Huespe, A. and Manzoli, O.L. (2008), "Two dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach". Comput. Method. Appl. M., 197, 332-348. https://doi.org/10.1016/j.cma.2007.05.017
  15. Oliver, J., Cervera, M. and Manzoli, O. (1999), "Strong discontinuities and continuum plasticity models: the strong discontinuity approach", Int. J. Plasticity, 15, 319-351. https://doi.org/10.1016/S0749-6419(98)00073-4
  16. Oliver, J. (2000), "On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations", Int. J. Solids Struct., 37, 7207-7229. https://doi.org/10.1016/S0020-7683(00)00196-7
  17. Ottosen, N.S. (1977), "A failure criterion for concrete", J. Eng. Mech. Division, 103(4), 527-535.
  18. Vecchio, F.J. and Shim, W. (2004), "Experimental and analytical re-examination of classic concrete beam tests", J. Struct. Eng. - ASCE, 130(3), 460-469. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(460)

피인용 문헌

  1. Towards a model of dry shear keyed joints: modelling of panel tests vol.10, pp.5, 2012, https://doi.org/10.12989/cac.2012.10.5.469
  2. The continuous-discontinuous Galerkin method applied to crack propagation vol.23, pp.4, 2010, https://doi.org/10.12989/cac.2019.23.4.235
  3. Implementation and engineering application of an improved rotating smeared crack model in rock mass fracture vol.8, pp.1, 2010, https://doi.org/10.1007/s40948-021-00318-6