Smart Structures and Systems

  • 제6권5_6호
  • /
  • Pages.731-748
  • /
  • 2010
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Concrete structural health monitoring using piezoceramic-based wireless sensor networks

  • Li, Peng (Department of Mechanical Engineering, University of Houston) ;
  • Gu, Haichang (Department of Mechanical Engineering, University of Houston) ;
  • Song, Gangbing (Department of Mechanical Engineering, University of Houston) ;
  • Zheng, Rong (Department of Computer Science, University of Houston) ;
  • Mo, Y.L. (Department of Civil and Environmental Engineering, University of Houston)
  • 투고 : 2009.10.14
  • 심사 : 2010.04.02
  • 발행 : 2010.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Impact detection and health monitoring are very important tasks for civil infrastructures, such as bridges. Piezoceramic based transducers are widely researched for these tasks due to the piezoceramic material's inherent advantages of dual sensing and actuation ability, which enables the active sensing method for structural health monitoring with a network of piezoceramic transducers. Wireless sensor networks, which are easy for deployment, have great potential in health monitoring systems for large civil infrastructures to identify early-age damages. However, most commercial wireless sensor networks are general purpose and may not be optimized for a network of piezoceramic based transducers. Wireless networks of piezoceramic transducers for active sensing have special requirements, such as relatively high sampling rate (at a few-thousand Hz), incorporation of an amplifier for the piezoceramic element for actuation, and low energy consumption for actuation. In this paper, a wireless network is specially designed for piezoceramic transducers to implement impact detection and active sensing for structural health monitoring. A power efficient embedded system is designed to form the wireless sensor network that is capable of high sampling rate. A 32 bit RISC wireless microcontroller is chosen as the main processor. Detailed design of the hardware system and software system of the wireless sensor network is presented in this paper. To verify the functionality of the wireless sensor network, it is deployed on a two-story concrete frame with embedded piezoceramic transducers, and the active sensing property of piezoceramic material is used to detect the damage in the structure. Experimental results show that the wireless sensor network can effectively implement active sensing and impact detection with high sampling rate while maintaining low power consumption by performing offline data processing and minimizing wireless communication.

키워드

과제정보

연구 과제 주관 기관 : NSF

참고문헌

  1. Avancha, S., Patel, C. and Joshi, A. (2004), "Ontology-driven adaptive sensor networks", Proceedings of the First Annual International Conference on Mobile and Ubiquitous Systems: Networking and Services.
  2. Bahel-el-din, Y.A., Saleh, A.M. and Talaat, M.M. (2003), "Electromechanical impedance technique for health monitoring of concrete structures", J. Eng. Appl. Sci., 50, 1111-1124.
  3. Bernard, R.T., Galen, K.B., Joseph, R.C., Henry, A.A., Siamak, S., Brian, A.K. and Hans, R.Z. (1988), Impact detection apparatus, United States Patent, 4745564.
  4. Champaigne, K.D. and Sumner, J. (2007), "Low-power electronics for distributed impact detection and piezoelectric sensor applications", Proceedings of the IEEE Aerospace Conference.
  5. Dubois-Ferriere, H., Meier, R., Fabre, L. and Metrailler, P. (2006), TinyNode: a comprehensive platform for wireless sensornetwork applications", Proceedings of the '06 Information Processing in Sensor Networks, Nashville, Tennessee, USA, April.
  6. Farrar, C. and Worden, K. (2007), "An introduction to structural health monitoring", Phil. Trans. R. Soc. A, 365(1851), 303-315. https://doi.org/10.1098/rsta.2006.1928
  7. Fujii, Y. and Fujimoto, H. (1999), "Proposal for an impulse response evaluation method for force transducers", Meas. Sci. Technol., 10(4), N31-N33. https://doi.org/10.1088/0957-0233/10/4/006
  8. Gu, H., Song, G., Dhonde, H., Mo, Y.L. and Yan, S. (2006), "Concrete early-age strength monitoring using embedded piezoelectric transducers", Smart Mater. Struct., 15, 1837-1845. https://doi.org/10.1088/0964-1726/15/6/038
  9. Hill, J., Szewczyk, R., Woo, A., Hollar, S., Culler, D. and Pister, K. (2000), "System architecture directions for networked sensors", ACM SIGPLAN Notices, 35(11), 93-104. https://doi.org/10.1145/356989.356998
  10. Laskar, A., Gu, H., Mo, Y.L. and Song, G. (2009), "Progressive collapse of a 2-story reinforced concrete frame with embedded smart aggregate", Smart Mater. Struct., 18(7).
  11. Liao, W.I., Gu, H., Olmi, C., Song, G., Mo, Y.L. and Loh, C.H. (2008), "Structural health monitoring of a concrete column subjected to shake table excitations using smart aggregates", Proceedings of the Intelligent Sensor and Actuator Symposium at ASCE Earth and Space conference, Long Beach, California, March.
  12. Mechitov, K., Kim, W., Agha, G. and Nagayama, T. (2004), "High-frequency distributed sensing for structure monitoring", Proceedings of the First International Workshop on Networked Sensing Systems.
  13. Mevel, L., Hermans, L. and van der Auweraer, H. (2000), "Health monitoring of a concrete three-span bridge", Proc. SPIE-The Int. Soc. Opt. Eng., 4062, 690-694.
  14. Olmi, C., Song, G. and Mo, Y.L. (2009), "Develop a mini-scale amplifier for piezoceramic active sensing devices for civil structural health monitoring", Proceedings of the International Postgraduate Conference on Infrastructure and Environment, Hong Kong, China.
  15. Pottie, G.J. and Kaiser, W.J. (2000), "Wireless integrated network sensors", Commun. ACM, 43(5), 51-58. https://doi.org/10.1145/332833.332838
  16. Song, G., Gu, H., Mo, Y.L., Hsu, T., Dhonde, H. and Zhu, R.R.H. (2005), "Health monitoring of a concrete structure using piezoceramic materials", Proc. SPIE-The Int. Soc. Opt. Eng., 5765, 108-119 (Part 1: Smart Structures and Materials).
  17. Song, G., Gu, H. and Mo, Y.L. (2007a), "Smart aggregates: a distributed intelligent multi-purpose sensor network (DIMSN) for civil structures", Proceedings of the 2007 IEEE International Conference on Networking, Sensing and Control.
  18. Song, G., Gu, H., Mo, Y.L., Hsu, T.T.C. and Dhonde, H. (2007b), "Concrete structural health monitoring using embedded piezoceramic transducers", Smart Mater. Struct., 16(4), 959-968. https://doi.org/10.1088/0964-1726/16/4/003
  19. Song, G., Olmi, C. and Gu, H. (2007c), "An overheight vehicle-bridge collision monitoring system using piezoelectric transducers", Smart Mater. Struct., 16, 462-468. https://doi.org/10.1088/0964-1726/16/2/026
  20. Song, G., Gu, H. and Mo, Y.L. (2008), "Smart aggregates: multi-functional sensors for concrete structures - a tutorial and a review", Smart Mater. Struct., 17(3).
  21. Staszewski, W.J., Worden, K., Wardle, R. and Tomlinson, G.R. (2000), "Fail-safe sensor distributions for impact detection in composite materials", Smart Mater. Struct., 9(3), 298-303. https://doi.org/10.1088/0964-1726/9/3/308
  22. Tseng, K.K. and Wang, L. (2004), "Smart piezoelectric transducers for in situ health monitoring of concrete", Smart Mater. Struct., 13, 1017-1024. https://doi.org/10.1088/0964-1726/13/5/006
  23. Viscardi, M. and Lecce, L. (2002), "An integrated system for active vibro-acoustic control and damage detection on a typical aeronautical structure", Proceedings of the 2002 International Conference on Control Applications.
  24. Wu, J., Yuan, S., Zhao, X., Yin, Y. and Ye, W. (2007), "A wireless sensor networks node designed for exploring a structural health monitoring application", Smart Mater. Struct., 16( 5), 1898-1906. https://doi.org/10.1088/0964-1726/16/5/046
  25. Yan, S., Sun, W., Song, G., Gu, H., Huo, L.S., Liu, B. and Zhang, Y.G. (2009), "Health monitoring of reinforced concrete shear walls using smart aggregates", Smart Mater. Struct., 18(4).
  26. Yang, Y.C. and Han, K.S. (2002), "Damage monitoring and impact detection using optical fiber vibration sensors", Smart Mater. Struct., 11(3), 337-345. https://doi.org/10.1088/0964-1726/11/3/303

피인용 문헌

  1. An exploratory study of stress wave communication in concrete structures vol.15, pp.1, 2015, https://doi.org/10.12989/sss.2015.15.1.135
  2. Intelligent Monitoring of Multistory Buildings under Unknown Earthquake Excitation by a Wireless Sensor Network vol.8, pp.12, 2012, https://doi.org/10.1155/2012/914638
  3. Wireless Sensor Placement for Bridge Health Monitoring Using a Generalized Genetic Algorithm vol.14, pp.05, 2014, https://doi.org/10.1142/S0219455414400112
  4. Crack location in beams by data fusion of fractal dimension features of laser-measured operating deflection shapes vol.13, pp.6, 2014, https://doi.org/10.12989/sss.2014.13.6.975
  5. Combining smart materials for enhancing intelligent systems: initial studies, success cases and research trends vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.517
  6. Reliability analysis of repairable k-out-n system from time response under several times stochastic shocks vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.559
  7. A Smart Washer for Bolt Looseness Monitoring Based on Piezoelectric Active Sensing Method vol.6, pp.12, 2016, https://doi.org/10.3390/app6110320
  8. Analytical solution of piezoelectric composite stack transducers vol.24, pp.13, 2013, https://doi.org/10.1177/1045389X13479185
  9. Proof-of-concept experimental study of damage detection of concrete piles using embedded piezoceramic transducers vol.22, pp.4, 2013, https://doi.org/10.1088/0964-1726/22/4/042001
  10. Modeling on energy harvesting from a railway system using piezoelectric transducers vol.24, pp.10, 2015, https://doi.org/10.1088/0964-1726/24/10/105017
  11. Dynamic analysis of 2-2 cement–based piezoelectric transducers vol.24, pp.1, 2013, https://doi.org/10.1177/1045389X12460340
  12. Dynamic characteristics of an axially polarized multilayer piezoelectric/elastic composite cylindrical transducer vol.60, pp.10, 2013, https://doi.org/10.1109/TUFFC.2013.2810
  13. Feasibility of Output-Only Modal Identification Using Wireless Sensor Network: A Quantitative Field Experimental Study vol.8, pp.11, 2012, https://doi.org/10.1155/2012/560161
  14. Wireless energy harvesting using time reversal technique: An experimental study with numerical verification vol.28, pp.19, 2017, https://doi.org/10.1177/1045389X17698242
  15. Models for designing radially polarized multilayer piezoelectric/elastic composite cylindrical transducers vol.27, pp.4, 2016, https://doi.org/10.1177/1045389X15573341
  16. Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates vol.17, pp.7, 2017, https://doi.org/10.3390/s17071641
  17. Feedback Control for Structural Health Monitoring in a Smart Aggregate Based Sensor Network 2018, https://doi.org/10.1142/S0219455418500645
  18. Wireless Sensing and Vibration Control With Increased Redundancy and Robustness Design vol.44, pp.11, 2014, https://doi.org/10.1109/TCYB.2014.2306811
  19. Electromechanical analysis of piezoelectric beam-type transducers with interlayer slip vol.60, pp.8, 2013, https://doi.org/10.1109/TUFFC.2013.2757
  20. Theoretical analysis of a resistance adjusting type piezoelectric cylindrical transducer vol.28, pp.20, 2017, https://doi.org/10.1177/1045389X17704068
  21. Feasibility Study on Crack Detection of Pipelines Using Piezoceramic Transducers vol.9, pp.10, 2013, https://doi.org/10.1155/2013/631715
  22. Electromechanical analysis of 2-2 cement-based piezoelectric transducers in series electrically vol.14, pp.3, 2014, https://doi.org/10.12989/sss.2014.14.3.267
  23. Self-reliant wireless health monitoring based on tuned-mass-damper mechanism vol.15, pp.6, 2015, https://doi.org/10.12989/sss.2015.15.6.1625
  24. Analysis of Dynamic Properties of Piezoelectric Structure under Impact Load vol.6, pp.12, 2015, https://doi.org/10.3390/mi6101441
  25. Carbon Fibre/Silicon Composite Sensors for Concrete Structural Health Monitoring in Compression vol.5, pp.2234-991X, 2012, https://doi.org/10.4028/www.scientific.net/AEF.5.224
  26. Development and Hybrid Position/Force Control of a Dual-Drive Macro-Fiber-Composite Microgripper vol.18, pp.4, 2018, https://doi.org/10.3390/s18041301
  27. Hysteretic Behavior of Steel Reinforced Concrete Columns Based on Damage Analysis vol.9, pp.4, 2019, https://doi.org/10.3390/app9040687
  28. Strain monitoring of reinforced concrete with OTDR-based FBG interrogation technique vol.20, pp.3, 2010, https://doi.org/10.12989/sss.2017.20.3.343
  29. Mechanical Properties of Desert Sand-Based Fiber Reinforced Concrete (DS-FRC) vol.9, pp.9, 2010, https://doi.org/10.3390/app9091857
  30. Design and validation of a fast wireless low-frequency vibration inspection system for offshore platform structures vol.39, pp.3, 2020, https://doi.org/10.1177/1461348419841252
  31. Design of a new low-cost unmanned aerial vehicle and vision-based concrete crack inspection method vol.19, pp.6, 2010, https://doi.org/10.1177/1475921719898862