Smart Structures and Systems

  • 제6권4호
  • /
  • Pages.373-388
  • /
  • 2010
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Finite element model updating of Kömürhan highway bridge based on experimental measurements

  • Bayraktar, Alemdar (Department of Civil Engineering, Karadeniz Technical University) ;
  • Altunisik, Ahmet Can (Department of Civil Engineering, Karadeniz Technical University) ;
  • Sevim, Baris (Department of Civil Engineering, Karadeniz Technical University) ;
  • Turker, Temel (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2008.12.16
  • 심사 : 2009.09.11
  • 발행 : 2010.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The updated finite element model of K$\ddot{o}$m$\ddot{u}$rhan Highway Bridge on the Firat River located on the $51^{st}$ km of Elazi$\breve{g}$-Malatya highway is obtained by using analytical and experimental results. The 2D and 3D finite element model of the bridge is created by using SAP2000 structural analyses software, and the dynamic characteristics of the bridge are determined analytically. The experimental measurements are carried out by Operational Modal Analysis Method under traffic induced vibrations and the dynamic characteristics are obtained experimentally. The vibration data are gathered from the both box girder and the deck of the bridge, separately. Due to the expansion joint in the middle of the bridge, special measurement points are selected when experimental test setups constitute. Measurement duration, frequency span and effective mode number are determined by considering similar studies in literature. The Peak Picking method in the frequency domain is used in the modal identification. At the end of the study, analytical and experimental dynamic characteristic are compared with each other and the finite element model of the bridge is updated by changing some uncertain parameters such as material properties and boundary conditions. Maximum differences between the natural frequencies are reduced from 10% to 2%, and a good agreement is found between natural frequencies and mode shapes after model updating.

키워드

참고문헌

  1. Ashebo, D.B., Chan, T.H.T. and Yu, L. (2007), "Evaluation of dynamic loads on a skew box girder continuous bridge part I: field test and modal analysis", Eng. Struct., 29(6), 1064-1073. https://doi.org/10.1016/j.engstruct.2006.07.013
  2. Bayraktar, A., Altunl lk, A.C., Türker, T., Sevlm, B. and Ate , . (2007), "Finite element model updating of highway bridges using operational modal analyses", Proceedings of the 1st Bridges and Viaducts Conference, Antalya, Turkey, November.
  3. Bozda , E., Sunbulo lu, E. and Ersoy, H. (2006), "Vibration analysis of new galata bridge: experimental and numerical results", Comput. Struct., 84(5-6), 283-292. https://doi.org/10.1016/j.compstruc.2005.09.018
  4. Chen, Y. (2006), Methodology for vibration-based highway bridge structural health monitoring, Doctorate Thesis, University of California, Irvine, USA.
  5. Conte, J.P., He, X., Moaveni, B., Masri, S.F., Caffrey, J.P., Wahbeh, M., Tasbihgoo, F., Whang, D.H. and Elgamal, A. (2008), "Dynamic testing of alfred zampa memorial bridge", J. Struct. Eng.-ASCE, 134(6), 1006- 1015. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(1006)
  6. El-Borgi, S., Choura, S., Ventura, C., Baccouch, M. and Cherif, F. (2005), "Modal identification and model updating of a reinforced concrete bridge", Smart Struct. Syst., 1(1), 83-101. https://doi.org/10.12989/sss.2005.1.1.083
  7. Guan, H. (2006), Vibration-based structural health monitoring of highway bidges, Doctorate Thesis, University of California, San Diego, USA.
  8. Guan, H., Karbhari, V.M. and Sikorsky, C.S. (2007), "Long-term structural health monitoring system for a FRP composite highway bridge structure", J. Intel. Mat. Syst. Str., 18(8), 809-823. https://doi.org/10.1177/1045389X06073471
  9. Huang, H. and Yang, J.N. (2008), "Damage identification of substructure for local health monitoring", Smart Struct. Syst., 4(6), 795-807. https://doi.org/10.12989/sss.2008.4.6.795
  10. Jaishi, B. (2005), Finite element model updating of civil engineering structures under operational conditions, Doctorate Thesis, University of Fuzhou, China.
  11. Lu, K.C., Loh, C.H., Yang, Y.S., Lynch, J.P. and Law, K.H. (2008), "Real-time structural damage detection using wireless sensing and monitoring system", Smart Struct. Syst., 4(6), 759-777. https://doi.org/10.12989/sss.2008.4.6.759
  12. Maeck, J., Peeters, B. and De Roeck, G. (2001), "Damage identification on the Z24 bridge using vibration monitoring", Smart Mater. Struct., 10(3), 512-517. https://doi.org/10.1088/0964-1726/10/3/313
  13. OMA (2006), Operational Modal Analysis, Release 4.0, Structural Vibration Solution A/S, Denmark.
  14. Patjawit, A. and Kanok-Nukulchai, W. (2005), "Health monitoring of highway bridges based on a global flexibility index", Eng. Struct., 27(9), 1385-1391. https://doi.org/10.1016/j.engstruct.2005.04.003
  15. PULSE (2006), Labshop, Version 11.2.2, Bruel & Kjaer Sound and Vibration Measurement A/S.
  16. Salawu, O.S. and Williams, C. (1995), "Review of full-scale dynamic testing of bridge structure", J. Eng. Struct., 17(2), 113-121. https://doi.org/10.1016/0141-0296(95)92642-L
  17. SAP2000 (1998), Integrated finite element analysis and design of structures, Computers and Structures Inc, Berkeley, California, USA.
  18. Teughels, A. and De Roeck, G. (2004), "Structural damage identification of the highway bridge Z24 by FE model updating", J. Sound Vib., 278(3), 589-610. https://doi.org/10.1016/j.jsv.2003.10.041
  19. Wang, M.L. (2008), "Long term health monitoring of post-tensioning box girder bridges", Smart Struct. Syst., 4(6), 711-726. https://doi.org/10.12989/sss.2008.4.6.711
  20. Wang, X. (2005), Structural condition assessment of steel stringer highway bridges, Doctorate Thesis, University of Cincinnati, Ohio, USA.
  21. Zhao, J. and DeWolf, J.T. (2002), "Dynamic monitoring of steel girder highway bridge", J. Bridge Eng., 7(6), 350-356. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:6(350)

피인용 문헌

  1. Computational finite element model updating tool for modal testing of structures vol.51, pp.2, 2014, https://doi.org/10.12989/sem.2014.51.2.229
  2. Field monitoring of the train-induced hanger vibration in a high-speed railway steel arch bridge vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.1107
  3. Safety assessment of structures for near-field blast-induced ground excitations using operational modal analysis vol.39, 2012, https://doi.org/10.1016/j.soildyn.2012.02.005
  4. Structural model updating of steel box girder bridge using modal flexibility based deflections vol.7, pp.4, 2012, https://doi.org/10.3846/bjrbe.2012.34
  5. Experimental and analytical system identification of Eynel arch type steel highway bridge vol.67, pp.12, 2011, https://doi.org/10.1016/j.jcsr.2011.06.008
  6. Analytical and experimental modal analyses of a highway bridge model vol.12, pp.6, 2013, https://doi.org/10.12989/cac.2013.12.6.803
  7. Laboratory Validation of Bridge Finite Model Updating Approach By Static Load Input/Deflection Output Measurements vol.20, pp.3, 2016, https://doi.org/10.11112/jksmi.2016.20.3.010
  8. Assessment of nonlinear seismic performance of a restored historical arch bridge using ambient vibrations vol.63, pp.4, 2011, https://doi.org/10.1007/s11071-010-9835-y
  9. Structural safety assessment of bowstring type RC arch bridges using ambient vibration testing and finite element model calibration vol.58, 2014, https://doi.org/10.1016/j.measurement.2014.08.002
  10. Ambient vibration testing of Berta Highway Bridge with post-tension tendons vol.16, pp.1, 2014, https://doi.org/10.12989/scs.2014.16.1.021
  11. Finite Element Model Updating of a PSC Box Girder Bridge Using Ambient Vibration Test vol.168-170, pp.1662-8985, 2010, https://doi.org/10.4028/www.scientific.net/AMR.168-170.2263
  12. Model Updating for Nam O Bridge Using Particle Swarm Optimization Algorithm and Genetic Algorithm vol.18, pp.12, 2018, https://doi.org/10.3390/s18124131
  13. Condition Assessment of Bridge Structures Based on a Liquid Level Sensing System: Theory, Verification and Application pp.2191-4281, 2018, https://doi.org/10.1007/s13369-018-3425-6
  14. Finite element model updating effects on nonlinear seismic response of arch dam-reservoir-foundation systems vol.47, pp.2, 2011, https://doi.org/10.1016/j.finel.2010.09.005
  15. Robust finite element model updating of a large-scale benchmark building structure vol.43, pp.3, 2012, https://doi.org/10.12989/sem.2012.43.3.371
  16. 경계조건을 고려한 단순보의 유한요소모델개선 vol.22, pp.2, 2010, https://doi.org/10.11112/jksmi.2018.22.2.076
  17. A Sequential Framework for Improving Identifiability of FE Model Updating using Static and Dynamic Data vol.19, pp.23, 2019, https://doi.org/10.3390/s19235099
  18. A novel multistage approach for structural model updating based on sensitivity ranking vol.25, pp.6, 2010, https://doi.org/10.12989/sss.2020.25.6.657