Smart Structures and Systems

  • 제6권3호
  • /
  • Pages.263-275
  • /
  • 2010
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Wireless sensor networks for long-term structural health monitoring

  • Meyer, Jonas (Empa, Swiss Federal Laboratories for Materials Testing and Research) ;
  • Bischoff, Reinhard (Empa, Swiss Federal Laboratories for Materials Testing and Research) ;
  • Feltrin, Glauco (Empa, Swiss Federal Laboratories for Materials Testing and Research) ;
  • Motavalli, Masoud (Empa, Swiss Federal Laboratories for Materials Testing and Research)
  • 투고 : 2008.05.01
  • 심사 : 2009.07.01
  • 발행 : 2010.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the last decade, wireless sensor networks have emerged as a promising technology that could accelerate progress in the field of structural monitoring. The main advantages of wireless sensor networks compared to conventional monitoring technologies are fast deployment, small interference with the surroundings, self-organization, flexibility and scalability. These features could enable mass application of monitoring systems, even on smaller structures. However, since wireless sensor network nodes are battery powered and data communication is the most energy consuming task, transferring all the acquired raw data through the network would dramatically limit system lifetime. Hence, data reduction has to be achieved at the node level in order to meet the system lifetime requirements of real life applications. The objective of this paper is to discuss some general aspects of data processing and management in monitoring systems based on wireless sensor networks, to present a prototype monitoring system for civil engineering structures, and to illustrate long-term field test results.

키워드

참고문헌

  1. Bennett, V., Abdoun, T., Shantz, T., Jang, D. and Thevanayagam, S. (2009), "Design and characterization of a compact array of MEMS accelerometers for geotechnical instrumentation", Smart Struct. Syst., 5(6), 663-679. https://doi.org/10.12989/sss.2009.5.6.663
  2. Bischoff, R., Meyer, J., Feltrin, G. and Saukh, O. (2006), "Monitoring of civil infrastructures using wireless sensor networks", Proceedings of the APWSHM'06 1st Asia-Pacific Workshop on Structural Health Monitoring, Yokohama, December.
  3. Caffrey, J., Govindan, R., Johnson, E., Krishnamachari, B., Masri, S., Sukhatme, G., Chintalapudi, K., Dantu, K., Rangwala, S., Sridhara, A., Xu, N. and Zuniga, M. (2004), "Networked sensing for structural health monitoring", Proceedings of the 4th International Workshop on Structural Control, Ed. R. Betti, Columbia University, New York.
  4. Culler, D., Estrin, D. and Srivastava, M. (2004), "Overview of sensor networks", IEEE Comput., 37(8), 41-49.
  5. Feltrin, G., Meyer, J., Bischoff, R. and Saukh, O. (2006), "A wireless sensor network for force monitoring of cable stays", Proceedings of the 3rd International Conference on Bridge Maintenance, Safety and Management, IABMAS 06, Porto, July.
  6. Gsell, D. and Motavalli, M. (2004), "Indoor cable-stayed GFRP bridge at EMPA, Switzerland", Proceedings of the 4th International Conference on Advanced Composite Materials in Bridges and Structures, Calgary.
  7. Kim, S., Pakzad, S., Culler, D.E., Demmel, D., Fenves, D., Glaser, S. and Turon, M. (2006), Health monitoring of civil infrastructures using wireless sensor networks, Technical report No. UCB/EECS-2006-121, University of California, Berkeley, CA.
  8. Levis, P., Madden, S., Polastre, J., Szewczyk, R., Whitehouse, K., Woo, A., Gay, D., Hill, J., Welsh, M., Brewer, E. and Culler, D. (2005), Tiny OS: An operating system for wireless sensor networks, Ambient Intelligence, Springer-Verlag, New York.
  9. Lu, K.C., Loh, C.H., Yang, Y.S., Lynch, J.P. and Law, K.H. (2008), "Real-time structural damage detection using wireless sensing and monitoring system", Smart Struct. Syst., 4(6), 759-777. https://doi.org/10.12989/sss.2008.4.6.759
  10. Lynch, J.P., Yang, W., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the Geumdang bridge using a dense network of high-resolution wireless sensors", Smart Mater. Struct., 15(6), 1561-1575. https://doi.org/10.1088/0964-1726/15/6/008
  11. Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S. and Carryer, E., (2003), "Powerefficient data management for a wireless structural monitoring system", Proceedings of the 4th International Workshop on Structural Health Monitoring, Ed. Chang, F.K., Stanford University, Stanford, CA.
  12. Mechitov, K., Kim, W., Agha, G. and Nagayama, T. (2006), "High-frequency distributed sensing for structure monitoring", Transac. Soc. Instr. Control Eng. (SICE), E-S-1(1), 109-114.
  13. Nagayama, T., Spencer, Jr., B.F., Mechitov, K.A. and Agha, G.A. (2009), "Middleware services for structural health monitoring using smart sensors", Smart Struct. Syst., 5(2), 119-137. https://doi.org/10.12989/sss.2009.5.2.119
  14. Polastre, J., Szewczyk, R. and Culler, D. (2005), Telos: Enabling ultra-low power research, Information Processing in Sensor Networks/SPOTS, Berkeley, April.
  15. Sazonov, E., Janoyan, K. and Jha, R. (2004), "Wireless intelligent sensor network for autonomous structural health monitoring", Proceedings of SPIE's Annual International Symposium on Smart Structures and Materials, San Diego, CA.

피인용 문헌

  1. Sensor Attitude Correction of Wireless Sensor Network for Acceleration-Based Monitoring of Civil Structures vol.30, pp.11, 2015, https://doi.org/10.1111/mice.12147
  2. A low-noise, real-time, wireless data acquisition system for structural monitoring applications vol.21, pp.7, 2014, https://doi.org/10.1002/stc.1636
  3. In-Situ Validation of a Wireless Data Acquisition System by Monitoring a Pedestrian Bridge vol.18, pp.1, 2015, https://doi.org/10.1260/1369-4332.18.1.97
  4. Compressive sensing of wireless sensors based on group sparse optimization for structural health monitoring 2018, https://doi.org/10.1177/1475921717721457
  5. An Approach of Reliable Data Transmission With Random Redundancy for Wireless Sensors in Structural Health Monitoring vol.15, pp.2, 2015, https://doi.org/10.1109/JSEN.2014.2352612
  6. Structural displacement and strain monitoring based on the edge detection operator vol.20, pp.2, 2017, https://doi.org/10.1177/1369433216660220
  7. A Study on Data Loss Compensation of WiFi-Based Wireless Sensor Networks for Structural Health Monitoring vol.16, pp.10, 2016, https://doi.org/10.1109/JSEN.2015.2512846
  8. Integration of Structural Health Monitoring and Intelligent Transportation Systems for Bridge Condition Assessment: Current Status and Future Direction vol.17, pp.8, 2016, https://doi.org/10.1109/TITS.2016.2520499
  9. A Wireless Sensor Network Using GNSS Receivers for a Short-Term Assessment of the Modal Properties of the Neckartal Bridge vol.7, pp.6, 2017, https://doi.org/10.3390/app7060626
  10. Compressive sampling–based data loss recovery for wireless sensor networks used in civil structural health monitoring vol.12, pp.1, 2013, https://doi.org/10.1177/1475921712462936
  11. Wireless MEMS-Based Accelerometer Sensor Boards for Structural Vibration Monitoring: A Review vol.17, pp.2, 2017, https://doi.org/10.1109/JSEN.2016.2630008
  12. Develoment of high-sensitivity wireless strain sensor for structural health monitoring vol.11, pp.5, 2013, https://doi.org/10.12989/sss.2013.11.5.477
  13. Bayesian compressive sensing for approximately sparse signals and application to structural health monitoring signals for data loss recovery vol.46, 2016, https://doi.org/10.1016/j.probengmech.2016.08.001
  14. Energy efficiency strategy for a general real-time wireless sensor platform vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.617
  15. Wireless monitoring of typhoon-induced variation of dynamic characteristics of a cable-stayed bridge vol.20, pp.2, 2015, https://doi.org/10.12989/was.2015.20.2.293
  16. Maximum Lifetime Strategy for Target Monitoring With Controlled Node Mobility in Sensor Networks With Obstacles vol.61, pp.11, 2016, https://doi.org/10.1109/TAC.2016.2536800
  17. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  18. Recent Developments on Wireless Sensor Networks Technology for Bridge Health Monitoring vol.2013, 2013, https://doi.org/10.1155/2013/947867
  19. Structural Health Monitoring in Incrementally Launched Steel Bridges: Patch Loading Phenomena Modeling vol.58, 2015, https://doi.org/10.1016/j.autcon.2015.07.001
  20. Stress relaxation insensitive designs for metal compliant mechanism threshold accelerometers vol.6, 2015, https://doi.org/10.1016/j.sbsr.2015.10.001
  21. Embedding Compressive Sensing-Based Data Loss Recovery Algorithm Into Wireless Smart Sensors for Structural Health Monitoring vol.15, pp.2, 2015, https://doi.org/10.1109/JSEN.2014.2353032
  22. Event-driven strain cycle monitoring of railway bridges using a wireless sensor network with sentinel nodes vol.24, pp.7, 2017, https://doi.org/10.1002/stc.1934
  23. An Efficient Target Monitoring Scheme With Controlled Node Mobility for Sensor Networks vol.20, pp.6, 2012, https://doi.org/10.1109/TCST.2011.2167151
  24. System identification of a historic swing truss bridge using a wireless sensor network employing orientation correction vol.22, pp.2, 2015, https://doi.org/10.1002/stc.1672
  25. On-board data synchronization in wireless structural health monitoring systems based on phase locking vol.25, pp.11, 2018, https://doi.org/10.1002/stc.2248
  26. Multitask Sparse Bayesian Learning with Applications in Structural Health Monitoring pp.10939687, 2018, https://doi.org/10.1111/mice.12408
  27. Diagnosis and accuracy enhancement of compressive-sensing signal reconstruction in structural health monitoring using multi-task sparse Bayesian learning vol.28, pp.3, 2019, https://doi.org/10.1088/1361-665X/aae9b4
  28. Application of MEMS-based accelerometer wireless sensor systems for monitoring of blast-induced ground vibration and structural health: a review pp.2043-6394, 2019, https://doi.org/10.1049/iet-wss.2018.5099
  29. Design of wireless sensor network and its application for structural health monitoring of cable-stayed bridge vol.6, pp.8, 2010, https://doi.org/10.12989/sss.2010.6.8.939
  30. Bayesian ballast damage detection utilizing a modified evolutionary algorithm vol.21, pp.4, 2018, https://doi.org/10.12989/sss.2018.21.4.435
  31. Technology Leveraging for Infrastructure Asset Management: Challenges and Opportunities vol.5, pp.None, 2019, https://doi.org/10.3389/fbuil.2019.00061
  32. Towards rapid and robust measurements of highway structures deformation using a wireless sensing system derived from wired sensors vol.10, pp.2, 2010, https://doi.org/10.1007/s13349-020-00385-5
  33. Implementation and Evaluation of Vision-Based Sensor Image Compression for Close-Range Photogrammetry and Structural Health Monitoring vol.20, pp.23, 2010, https://doi.org/10.3390/s20236844
  34. Compressed sensing-based electromechanical admittance data loss recovery for concrete structural health monitoring vol.20, pp.3, 2010, https://doi.org/10.1177/1475921720950640
  35. A compressive sensing method for processing and improving vision‐based target‐tracking signals for structural health monitoring vol.36, pp.9, 2010, https://doi.org/10.1111/mice.12653