DOI QR코드

DOI QR Code

Experimental studies on the fatigue life of shape memory alloy bars

  • 투고 : 2009.05.14
  • 심사 : 2009.07.11
  • 발행 : 2010.01.25

초록

The potential offered by the thermo-mechanical properties of shape memory alloys (SMA) in structural engineering applications has been the topic of many research studies during the last two decades. The main issues concern the long-term predictability of the material behaviour and the fatigue lifetime of the macro structural elements (as different from the one of wire segments). The laboratory tests reported in this paper are carried out on bar specimens and they were planned in order to pursue two objectives. First, the creep phenomenon is investigated for two different alloys, a classical Ni-Ti alloy and a Cu-based alloy. The attention is then focused on the Cu-based alloy only and its fatigue characteristics at given temperatures are investigated. Stress and thermal cycles are alternated to detect any path dependency.

키워드

과제정보

연구 과제 주관 기관 : Athenaeum Research Fund of the University of Catania

참고문헌

  1. Auricchio, F., Faravelli, L., Magonette, G. and Torra, V. (2001), Shape memory alloys: advanced in modelling and applications, CIMNE, Barcelona, Spain.
  2. Casciati, F. and Faravelli, L. (2004), "Experimental characterization of a cu-based shape memory alloy toward its exploitation in passive control devices", J. Phys. IV, 115, 299-306.
  3. Casciati, F. and Faravelli, L. (2009), "A passive control device with SMA components: from the prototype to the model", Struct. Control Health Monit., DOI: 10.1002/stc.328.
  4. Casciati, F. and van der Eijk, C. (2008), "Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Struct. Syst., 4(2), 103-122. https://doi.org/10.12989/sss.2008.4.2.103
  5. Casciati, F., Casciati, S. and Faravelli, L. (2007), "Fatigue characterization of a cu-based shape memory alloy", Proc. of the Estonian Academy of Sciences, 56, 207-217.
  6. Casciati, F., Faravelli, L. and Hamdaoui, K. (2007), "Shape memory alloy bars assembled in a base isolator", Proc. of the ANCER Conf., Hong Kong.
  7. Casciati, F., Faravelli, L., Isalgue, A., Martorell, F., Soul, H. and Torra, V. (2008), "SMA fatigue in civil engineering applications", Adv. Sci. Technol., Trans Tech Publications, Switzerland, 59, 168-177.
  8. Casciati, S. and Faravelli, L. (2004), "Thermo-mechanic characterization of a cu-based shape memory alloy", Proc. of Int. Symposium on Network and Center-Based Research for Smart Structures Technologies and Earthquake Engineering, July 6-9, Osaka Univ., Suita, Osaka, Japan, 377-388.
  9. Casciati, S. and Faravelli, L. (2006), "Fatigue tests of a cu-based shape memory alloy", Proc. of the 4th World Conf. on Structural Control & Monitoring, San Diego, USA.
  10. Casciati, S. and Faravelli, L. (2008), "Structural components in shape memory alloy for localized energy dissipation", Comput. Struct., 86, 330-339. https://doi.org/10.1016/j.compstruc.2007.01.037
  11. Casciati, S. and Hamdaoui, K. (2008), "Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures", Smart Struct. Syst., 4(2), 153-170. https://doi.org/10.12989/sss.2008.4.2.153
  12. Casciati, S. and Marzi, A. (2008), "Comparison of the thermo-mechanical behaviour of different shape memory alloys", Proc. of the 4th European Conf. on Structural Control, St. Petersburg, Russia, 1, 141-148.
  13. Casciati, S. and Osman, A. (2005), "Damage assessment and retrofit study for the Luxor Memnon Colossi", Struct. Control Health Monit., 12, 139-156. https://doi.org/10.1002/stc.53
  14. Montecinos, S., Moroni, M.O. and Sepùlveda, A. (2006), "Superelastic behaviour and damping capacity of CuAlBe alloys", Mater. Sci. Eng. A, 419, 91-97. https://doi.org/10.1016/j.msea.2005.11.057
  15. Olsen, J.S., van der Eijk, C. and Zhang, Z.L. (2008), "Analysis of shape memory alloy based seismic damper", Smart Struct. Syst., 4(2), 137-152. https://doi.org/10.12989/sss.2008.4.2.137
  16. Otsuka, K. and Wayman, C.M. (1999), Shape memory materials, Cambridge University Press.
  17. Torra, V., Isalgue, A., Auguet, C., Carreras, G., Lovey, F.C., Soul, H. and Terriault, P. (2009), "Damping in civil engineering using SMA. the fatigue behavior and stability of CuAlBe and NiTi alloys", J. Mater. Eng. Perform., DOI: 10.1007/s11665-009-9442-6, May.
  18. Torra, V., Isalgue, A., Martorell, F., Casciati, F., Lovey, F.C., Peigney, M., Terriault, P., Tirelli, D. and Zapico, B. (2009), "SMA in mitigation of extreme loads in civil engineering: damping of earthquake effects in family houses and in wind/rain perturbations on stayed cables in bridges", Proc. PROTECT, Japan.
  19. Torra, V., Isalgue, A., Martorell, F., Terriault, P. and Lovey, F.C. (2007), "Built in dampers for family homes via SMA: An ANSYS computation scheme based on mesoscopic and microscopic experimental analyses", Eng. Struct., 29, 1889-1902. https://doi.org/10.1016/j.engstruct.2006.08.028

피인용 문헌

  1. Robust structural control with system constraints vol.19, pp.3, 2012, https://doi.org/10.1002/stc.447
  2. An analysis of pounding mitigation and stress waves in highway bridges with shape memory alloy pseudo-rubber shock-absorbing devices vol.23, pp.10, 2016, https://doi.org/10.1002/stc.1835
  3. Future applications of Ni-Ti alloys in automotive safety systems vol.15, pp.3, 2014, https://doi.org/10.1007/s12239-014-0049-z
  4. Testing and modelling of shape memory alloy plates for energy dissipators vol.14, pp.5, 2014, https://doi.org/10.12989/sss.2014.14.5.883
  5. A look into Cu-based shape memory alloys: Present scenario and future prospects vol.29, pp.16, 2014, https://doi.org/10.1557/jmr.2014.189
  6. Feasibility of shape memory alloy in a tuneable mass damper to reduce excessive in-service vibration vol.24, pp.2, 2017, https://doi.org/10.1002/stc.1858
  7. Feasibility of tension braces using Cu-Al-Mn superelastic alloy bars vol.21, pp.10, 2014, https://doi.org/10.1002/stc.1644
  8. Long-time storage effects on shape memory alloy wires 2017, https://doi.org/10.1007/s00707-017-1993-2
  9. Fatigue tests on SMA bars in span control vol.33, pp.4, 2011, https://doi.org/10.1016/j.engstruct.2010.12.045
  10. Investigation on the fatigue performance of Ni-Ti thin wires vol.24, pp.1, 2017, https://doi.org/10.1002/stc.1855
  11. Effect of hysteretic properties of SMAs on seismic behavior of self-centering concentrically braced frames 2017, https://doi.org/10.1002/stc.2110
  12. Mechanical properties and theoretical modeling of self-centering shape memory alloy pseudo-rubber vol.20, pp.11, 2011, https://doi.org/10.1088/0964-1726/20/11/115008
  13. Seismic response control of buildings with force saturation constraints vol.12, pp.2, 2013, https://doi.org/10.12989/sss.2013.12.2.157
  14. Shape memory alloys as an effective tool to damp oscillations vol.119, pp.3, 2015, https://doi.org/10.1007/s10973-015-4405-7
  15. Seismic Response Control Using Shape Memory Alloys: A Review vol.22, pp.14, 2011, https://doi.org/10.1177/1045389X11411220
  16. Local effects induced by dynamic load self-heating in NiTi wires of shape memory alloys 2017, https://doi.org/10.1002/stc.2134
  17. Experimental observations on mechanical response of three-phase NiTi shape memory alloy under uniaxial tension vol.3, pp.10, 2016, https://doi.org/10.1088/2053-1591/3/10/105701
  18. Advanced materials for control of post-earthquake damage in bridges vol.24, pp.2, 2015, https://doi.org/10.1088/0964-1726/24/2/025035
  19. On the NiTi wires in dampers for stayed cables vol.13, pp.3, 2014, https://doi.org/10.12989/sss.2014.13.3.353
  20. Characterization of NiTi Shape Memory Damping Elements designed for Automotive Safety Systems vol.23, pp.7, 2014, https://doi.org/10.1007/s11665-014-1045-1
  21. Cyclic mechanical properties of copper-based shape memory alloys: The effect of strain accommodation at grain boundaries vol.105, 2017, https://doi.org/10.1016/j.ijfatigue.2017.08.011
  22. Functional Fatigue of Polycrystalline Cu-Al-Mn Superelastic Alloy Bars under Cyclic Tension vol.28, pp.5, 2016, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001417
  23. High Cycle-life Shape Memory Polymer at High Temperature vol.6, pp.1, 2016, https://doi.org/10.1038/srep33610
  24. Dynamic analysis of a historical monument: retrofit using shape memory alloy wires vol.13, pp.3, 2014, https://doi.org/10.12989/sss.2014.13.3.375
  25. Experimental analyses of dynamical systems involving shape memory alloys vol.15, pp.6, 2015, https://doi.org/10.12989/sss.2015.15.6.1521
  26. Shape-memory alloys as macrostrain sensors vol.24, pp.1, 2017, https://doi.org/10.1002/stc.1860
  27. Seismic resilience timber connection-adoption of shape memory alloy tubes as dowels vol.24, pp.10, 2017, https://doi.org/10.1002/stc.1980
  28. Dynamic performance of a superelastic column-base connection vol.25, pp.7, 2018, https://doi.org/10.1002/stc.2186
  29. S-N curve fatigue study and the stress-strain properties on the refurbish NITI SMA for reinforcing bar in concrete vol.469, pp.1757-899X, 2019, https://doi.org/10.1088/1757-899X/469/1/012116
  30. Coupling shape-memory alloy and embedded informatics toward a metallic self-healing material vol.6, pp.9, 2010, https://doi.org/10.12989/sss.2010.6.9.1041
  31. Fatigue laboratory tests toward the design of SMA portico-braces vol.7, pp.1, 2010, https://doi.org/10.12989/sss.2011.7.1.041
  32. Energy-balance assessment of shape memory alloy-based seismic isolation devices vol.8, pp.4, 2011, https://doi.org/10.12989/sss.2011.8.4.399
  33. Seismic behavior of properly designed CBFs equipped with NiTi SMA braces vol.21, pp.4, 2010, https://doi.org/10.12989/sss.2018.21.4.479
  34. Temperature effect on seismic performance of CBFs equipped with SMA braces vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.495
  35. Comparison of Bending Fatigue of NiTi and CuAlMn Shape Memory Alloy Bars vol.2020, pp.None, 2010, https://doi.org/10.1155/2020/8024803
  36. Experimental Study on Temperature Effects on NiTi Shape Memory Alloys under Fatigue Loading vol.13, pp.3, 2010, https://doi.org/10.3390/ma13030573
  37. Seismic vibration control of an innovative self-centering damper using confined SMA core vol.25, pp.2, 2010, https://doi.org/10.12989/sss.2020.25.2.241
  38. Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS): an engineering solution for practical aseismic isolation with advanced materials vol.26, pp.1, 2010, https://doi.org/10.12989/sss.2020.26.1.089