Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Study on push-out test and bond stress-slip relationship of circular concrete filled steel tube

  • Yin, Xiaowei (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Lu, Xilin (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • Received : 2009.09.16
  • Accepted : 2010.06.16
  • Published : 2010.07.25
⟨ Previous Next ⟩

Abstract

According to the results of 9 circular concrete filled steel tube (CFT) push-out tests, a new theoretical model for average bond stress versus free end slip curve is proposed. The relationship between verage bond stress and free end slip is obtained considering some varying influential parameters such as slenderness ratio and diameter-to-thickness ratio. Based on measured steel tube strain and relative slip at different longitudinal positions, the distribution of bond stress and relative slip along the length of steel tube is obtained. An equation for predicting the varying bond-slip relationship along longitudinal length and a position function reflecting the variation are proposed. The presented method can be used in the application of finite element method to analyze the behavior of CFT structures.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Achillides, Z. and Pilakoutas, K. (2004), "Bond behavior of fiber reinforced polymer bars under direct pullout conditions", J. Compos. Constr., 8(2), 173-181. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(173)
  2. Aiello, M.A., Leone, M. and Pecce, M. (2007), "Bond performances of FRP rebars-reinforced concrete", J. Mater. Civil. Eng., 19(3), 205-213. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:3(205)
  3. Almusallam, A.A., Al-Gahtani, A.S. and Rasheeduzzafar, A.R. (1996), "Effect of reinforcement corrosion and cracking on bond strength", Constr. Build. Mater., 10(2),123-129. https://doi.org/10.1016/0950-0618(95)00077-1
  4. Al-Sulaimani, G.J., Kaleemullah, M., Basunbul, I.A. and Rasheeduzzafar, A.R. (1990), "Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members", ACI Struct. J., 87(2), 220-231.
  5. Dai, J.G., Ueda, T. and Sato, Y. (2005), "Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method", J. Compos. Constr., 9(1), 52-62. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:1(52)
  6. Hajjar, J.F. and Gourley, B.C. (1996), "Representation of concrete-filled steel tube cross-section strength", J. Struct. Eng-ASCE, 122(11), 1327-1336. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1327)
  7. Lee, H.S., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cement. Concrete. Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4
  8. Lu, X.L. (2007), Seismic theory and application for complex high-rise structures, Science Press, China.
  9. Mains, R.M. (1951), "Measurement of the distribution of tensile and bond stresses along reinforcing bars", ACI J., 48(11), 225-252.
  10. Malvar, L.J. (1995), "Tensile and bond properties of GFRP reinforcing bars", ACI Mater. J., 92(3), 276-285.
  11. Okelo, R. and Yuan, R.L. (2005), "Bond strength of fiber reinforced polymer rebars in normal strength concrete", J. Compos. Constr., 9(3), 203-213. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:3(203)
  12. Roeder, C.W., Chmielowski, R. and Brown C.B. (1999), "Shear connector requirements for embedded steel sections", J. Struct. Eng-ASCE, 125(2), 142-151. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(142)
  13. Schiller, P.H., Hajjar, J.F. and Molodan, A. (1998), "A distributed plasticity formulation for three-dimensional rectangular concrete-filled steel tube beam columns and composite frames", 96(5), Dept. of Civ. Eng. Univ. of Minneapolis, Minneapolis.
  14. Shakir-Khalil, H. (1993), "Push out strength of concrete-filled steel hollow sections", Struct. Eng., 71(13), 230-233.
  15. Shakir-Khalil, H. and Zeghiche, Z. (1989), "Experimental behavior of concrete-filled rolled rectangular hollow section columns", Struct. Eng., 67(19), 345-353.
  16. Somayaji, S. and Shah, S.P. (1981), "Bond stress versus slip relationship and cracking response of tension members", ACI J., 78(3), 217-224.
  17. Tassios, T.P. and Yannopulos, P.J. (1981), "Analytical studies on reinforced concrete members under cyclic loading based on bond stress-slip relationships", ACI J., 78(3), 206-216.
  18. Tastani1, S.P. and Pantazopoulou, S.J. (2006), "Bond of GFRP bars in concrete: experimental study and analytical interpretation", J. Compos. Constr., 10(5), 381-391. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:5(381)
  19. Xu, Y.L. (1990), Experimental study of bond-anchorage properties for deformed bars in concrete, Tsinghua Univ, China.
  20. Xue, J.Y., Yang, Y. and Zhao, H.T. (2005), "Experimental study on bond strengths of steel reinforced concrete structure", J. Xi'an Univ. of Arch. & Tech. (Natural Science Edition), 37(2), 149-154.
  21. Zhang, B. and Benmokrane, B. (2002), "Pullout bond properties of fiber-reinforced polymer tendons to grout", J. Mater. Civil. Eng., 14(5), 399-408. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:5(399)

Cited by

  1. Refining bond–slip constitutive relationship between checkered steel tube and concrete vol.79, 2015, https://doi.org/10.1016/j.conbuildmat.2014.12.058
  2. Efficiency on uni-axial compressive strength improvement by using externally confined concrete-filled steel tube columns vol.20, pp.2, 2013, https://doi.org/10.1080/1023697X.2013.794572
  3. A numerical model for considering the bond-slip effect in axially loaded circular concrete-filled tube columns vol.21, pp.12, 2018, https://doi.org/10.1177/1369433218759779
  4. FE analysis of circular CFT columns considering bond-slip effect: A numerical formulation vol.9, pp.2, 2018, https://doi.org/10.5194/ms-9-245-2018
  5. AN INVESTIGATION INTO WORKING BEHAVIOR CHARACTERISTICS OF PARABOLIC CFST ARCHES APPLYING STRUCTURAL STRESSING STATE THEORY vol.25, pp.3, 2010, https://doi.org/10.3846/jcem.2019.8102
  6. 개선된 부착슬립 모델을 적용한 부분 CFST 기둥의 수치해석 vol.33, pp.3, 2010, https://doi.org/10.7734/coseik.2020.33.3.153
  7. Concrete-steel bond-slip behavior of recycled concrete: Experimental investigation vol.38, pp.3, 2021, https://doi.org/10.12989/scs.2021.38.3.241
  8. An approach for partial strengthening of circular RC columns using outer steel tube vol.38, pp.6, 2010, https://doi.org/10.12989/scs.2021.38.6.739